What is the production process of banner slogans?

Production process of banners and slogans:

1. Manual engraving method: write pictures and texts on white paper with engraving machine or hand drawing (which requires artistic skills)-dig out the parts that need to be printed (which need to be connected) with art knife-prepare printing materials, If it is glue for dark cloth and water slurry for light cloth (special cloth such as nylon can be used for fastness)-Prepare the screen frame and stretch the screen of 8-12 mesh (polyester screen is well taught)-Prepare the printing material (cloth)-Put the engraved words on the cloth-Press the blank screen-Pour the printing material-Fill it with scraper and collect the printing material.

2. photosensitive plate-making method: if the quantity is large and the content is the same, you can use this method to coat the photosensitive glue on the prepared silk screen-stick it on the screen with good glue in time with flying tablets or computer lettering-dry the board with projection lamp (the general screen frame is about 4m x .9m)-wash and develop-print.

3. Self-adhesive method: the lettering is pasted on the screen board in time by computer, and it is directly used for printing. The key thing to pay attention to is how to deal with the viscosity that is not easy to use in time, such as pressing it after heating with a hair dryer or adding some glue to the strokes.

4. Thermal transfer printing method: a popular production method in many places in China. Its characteristics are: good hand feeling, good fastness, no drying, no pollution, etc., but the cost is slightly higher. Silk-printed or offset-printed colored paper (or ready-made monochrome colored paper carved and pasted) is placed on the printed cloth. After being pressed at a high temperature of more than 18 degrees for a few seconds, the pictures and texts are firmly printed on the cloth and become banners.