Does car wrapping require a dust-free workshop?

Many people ask whether window film must be operated in a "clean room". In the past, due to limited conditions, many car decoration shops usually applied films in outdoor environments. In the past two years, a so-called "indoor dust-free movie" has become popular. The so-called "dust-free film" environment is only an improvement over the outdoor films of the past. It works in a closed room. The working environment is much better than outdoors, which helps ensure the quality of the film. Therefore, a dust-free construction room is very necessary for film application. However, this dust-free construction room is not dust-free in the strict sense. Only in the pharmaceutical and precision electronics industries, an environment where the air has been filtered and reached a certain level of purification and dust removal is a truly dust-free environment.

Although the environment plays a very important role in the quality of automobile explosion-proof insulation film, it is not the only condition. Most of the dust spots on the film do not come from the air, but from the car itself. If the film applicator's installation level is not high, even if the film is applied in a real clean room, it will be difficult to ensure that there are no dust spots on the film. There is no such term as "dust-free film" in the International Window Film Association's operating specifications. Therefore, as long as the operation is carried out in a clean and sealed professional laminating room, spray dust reduction treatment is carried out before laminating, and professional tools and standard processes are used for installation, the laminating requirements can be met. The concept of "dust-free film" has a certain amount of commercial hype.

What are the conditions for a clean workshop? Each terminal service store must have a separate and dedicated cleaning film kiosk that can accommodate at least one vehicle structure and is fully equipped with specialized tools and equipment.

The requirements for dust-free membrane rooms are as follows: empty room dimensions: net dimensions: width not less than 4m, length not less than 6m. The minimum vacant room is not less than 24 square meters.

Decoration:

Wall: waterproof treatment.

Floor: waterproof and anti-slip treatment, peripheral drainage pipes.

Ceiling: carry out effective treatment and do not allow dust to splash from high places.

Spraying system: The spraying system or dust removal equipment, tools and equipment required for Kemei film should be equipped;

Tool cart, special tools and supplies, special towels, tools with digital display Bosch baking gun, Kemei film complete set of tools and lubricants: Johnson & Johnson baby shampoo, DuPont non-woven fabrics, Kemei film seat cover, Kemei film instrument cover, trash can, supporting equipment, /[K0/] adjustment , film cutting table, water purification equipment or water dispenser, power strip, wipeable and recordable.

@2019