How to calculate the production safety measures fee?

The production safety measures fee is based on the nature of the production, and the safety fee per unit output is also different. For non-coal mining enterprises, extraction is calculated on a monthly basis based on the output of raw ore mined, that is, the extraction amount per ton is multiplied by the mining weight.

According to Article 5 of the "Administrative Measures for the Withdrawal and Use of Enterprise Safety Production Expenses", coal production enterprises withdraw monthly based on the output of mined raw coal. The standards for extracting safety expenses per unit output of raw coal in various coal mines are as follows: (1) 30 yuan per ton of coal in coal (rock) and gas (carbon dioxide) outburst mines and high gas mines;

( 2) 15 yuan per ton of coal in other underground mines;

(3) 5 yuan per ton of coal in open-pit mines.

The classification of mine gas levels shall be carried out in accordance with the current "Coal Mine Safety Regulations" and "Mine Gas Grade Appraisal Standards".

Article 6: Non-coal mining enterprises shall withdraw monthly based on the output of raw ore mined. The extraction standards for unit production safety costs of raw ore in various mines are as follows: (1) Petroleum, 17 yuan per ton of crude oil; (2) Natural gas and coalbed methane (surface mining), 17 yuan per ton of crude oil; 5 yuan per thousand cubic meters of raw gas;

(3) Metal mines, including open-pit mines, 5 yuan per ton, and underground mines, 10 yuan per ton;

(4) Nuclear industry mines, per ton 25 yuan per ton;

(5) Non-metallic mines, including 2 yuan per ton for open-pit mines and 4 yuan per ton for underground mines;

(6) Small open-pit quarries, namely The total annual mining and stripping volume is less than 500,000 tons, and the maximum mining height does not exceed 50 meters. The products are used in hillside open-pit quarries for construction and paving. 1 yuan per ton;

(7) Tailings The storage is calculated based on the amount of tailings entering the storage. The third-class and above-grade tailings storage is 1 yuan per ton, and the fourth- and fifth-class tailings storage is 1.5 yuan per ton.

For tailings ponds that have been closed before the date of issuance of these measures, extraction will be based on the effective storage capacity of the stored tailings. If the storage capacity is less than 1 million cubic meters, 50,000 yuan will be withdrawn per year; For 1 million cubic meters, an additional 30,000 yuan will be added for each additional 1 million cubic meters, but the maximum annual withdrawal amount shall not exceed 300,000 yuan.

Raw ore output does not include tailings and low-grade ores used for comprehensive utilization in metal and non-metal mine tailings ponds and waste rock dumps.

The safety expenses of the geological exploration unit shall be calculated as 2% of the total cost of the geological exploration project or project.

Article 7: Construction project construction enterprises shall make provision based on the cost of the construction and installation project. The safety fee extraction standards for each construction project category are as follows:

(1) Mining projects are 2.5;

(2) Housing construction projects, water conservancy and hydropower projects, electric power projects, railway projects, urban projects Rail transit engineering is 2.0;

(3) Municipal public engineering, smelting engineering, mechanical and electrical installation engineering, chemical petroleum engineering, port and waterway engineering, highway engineering, and communication engineering are 1.5.

The safety fees extracted by the construction project construction enterprises are included in the project cost, and shall not be deleted during bidding, and shall be included in the out-of-bid management. If the state has other provisions on capital construction investment budget estimates, such provisions shall prevail. The general contracting unit shall directly pay the safety fees to the subcontracting units in proportion and supervise their use, and the subcontracting units shall not make repeated withdrawals.

Extended information:

Article 19 of the "Administrative Measures for the Collection and Use of Enterprise Safety Production Expenses" Construction project construction enterprise safety expenses shall be used within the following scope:

(1) Expenditures on improving, transforming and maintaining safety protection facilities and equipment (excluding safety facilities required for initial investment in the "Three Simultaneities"), including temporary power systems at construction sites, openings, edges, mechanical equipment, protection for high-altitude operations, Expenditures on facilities and equipment such as cross-operation protection, fire protection, explosion protection, dust protection, virus protection, lightning protection, typhoon protection, geological disaster prevention, underground engineering harmful gas monitoring, ventilation, temporary safety protection and other facilities;

(2) Equipment , maintenance and upkeep of emergency rescue equipment, equipment expenditures and emergency drill expenditures;

(3) Expenditures for assessment, monitoring and rectification of major hazards and accident hazards;

(4) Safety Production inspection, consultation, evaluation (excluding safety evaluation of new construction, reconstruction, and expansion projects) and standardized construction expenditures;

(5) Expenditures on equipping and updating safety protective equipment for on-site workers;

(6) Expenditures on safety production publicity, education, and training;

(7) Expenditures on the promotion and application of new technologies, new equipment, new processes, and new standards applicable to safety production;

(8) Expenditures on testing and inspection of safety facilities and special equipment;

(9) Other expenses directly related to production safety.

Baidu Encyclopedia - Management Measures for the Extraction and Use of Enterprise Safety Production Expenses