Driving safety operating procedures

1. Before using the equipment, you must carefully check all parts of the equipment to ensure that they are in a safe condition before use. It is strictly prohibited to use the equipment while driving while sick.

2. When using, you must first press the control button to determine the correct driving direction. During driving, the hook must not collide with any object, and the height of the hook during empty operation must be more than two meters above the ground.

3. Before the hook approaches the workpiece, it must be moved slowly. It is strictly forbidden to use reverse instead of braking.

4. The weight of the object to be lifted must be confirmed before lifting, and overload operations are strictly prohibited.

5. The lifting locks must meet the load requirements and must be lifted according to the lifting position. When lifting the workpiece, you must first perform a test lift to ensure the mechanical braking performance of the vehicle and the stability and reliability of the lifted object.

6. It is not allowed to pull or lift the lifting objects at an angle. Make sure that the hook is vertical. When the lifting object is in operation, the height from the ground shall not exceed 10 cm. The lifting position of the lifting rope must be reasonable and reliable to ensure safe lifting. .

7. When lifting, no one is allowed to stand on or off the workpiece, and there are no floating objects on the workpiece. It is not allowed to process heavy objects while the heavy objects are suspended in the air. It is strictly forbidden to place hands directly under the workpiece. .

8. When lifting objects with sharp edges or sharp edges, they must be padded with wooden blocks or gauze.

9. It is strictly prohibited to lift oxygen bottles, acetylene bottles and other explosive items.

10. After driving, it is strictly forbidden to take off the remote control button box at will to avoid shaking and collision.

11. After the work is completed, the vehicle must be parked directly above the support column and the power switch on the remote control button box must be turned off.

12. "Ten Do not Lift" in lifting operations

(1) Do not lift when the rated load of the vehicle is exceeded;

(2) Unknown command signal and unknown weight , the light is dim;

(3) The slings and accessories are not tied firmly and do not meet safety requirements;

(4) Heavy objects are hung directly for processing while driving. Do not lift;

(5) Do not lift when hanging at an angle or the center of gravity of the hoisted object is too far;

(6) Do not lift when there is a person standing on the workpiece or floating objects on the workpiece;

(7) Oxygen bottles, acetylene bottles and other explosive dangerous goods shall not be hoisted;

(8) Objects with edges and edges are not properly padded (to prevent wire ropes from being worn out). ;

(9) Do not lift objects buried underground that are overfilled with high-temperature liquids;

(10) Do not lift when operating in violation of regulations or under the command of non-lifting commanders.