How to match fish float and fish pendant to achieve the best effect?

It seems that you are a loyal fishing friend. Let me tell you several ways to adjust the standard. I benefited a lot from it. Try it, for reference only:

First, the concept of drift adjustment

Calibration: refers to setting the balance point of the intersection point between buoy and water surface by adding and subtracting the weight of plumb bob in the line group. Because anglers have different fishing concepts and different understandings of buoys, there are many calibration methods, each with its own reasons. It's hard to say which method is right and which method is wrong. But when fishing or catching different species in different waters, if the calibration method you are used to is ineffective, it is the best policy to deal with it in time.

Second, several bleaching methods:

1. adjustment with bait: when adjusting the standard, use double hooks to hang the bait, and control the waterline length so that the bait ball does not touch the bottom and the double bait is suspended. The weight of the double bait suspended in the water has been balanced by the buoyancy of the buoy, and the weight is zero, fluttering in the water. When the fish swims near the bait, the sucking and spitting water can drive the bait to move, resulting in the displacement of the buoy. People who adjust in this way are pursuing absolute sensitivity ideologically, and always hope to catch the fish at the first action of eating bait. However, excessive sensitivity has also brought some side effects-the false signals of buoys have increased obviously, and dancing buoys will make you dizzy and at a loss. Although adjusting the standard with bait will increase the number of fake actions, it is not without countermeasures. The trouble of fake action can be solved by adjusting the mind and fishing dully. For example, you can catch two eyes, three eyes, even five eyes and six eyes by hanging two baits and adjusting one eye. As long as the buoy has a signal, it is no problem to fish boldly. For fishermen, they are not afraid that the buoy will move, but they are afraid that the buoy will not move.

2. No decoy bid adjustment: No decoy bid adjustment can also be said to be empty hook bid adjustment. Except that the bait is not hung on the double hook, the other places are the same as those with bait. The guiding ideology of this calibration is to ignore the weight of bait and let at least one bait ball fall to the bottom of the water when fishing. This method is widely used by competitive fishing enthusiasts. Its advantages are lethargy, both offensive and defensive, and it has a certain effect on slippery fish. Of course, this calibration method is invincible only when fishing crucian carp in competitive fish ponds, but it is a mixed success and failure to fish other fish species in natural waters, and there is no absolute advantage. No matter whether there is bait or no bait, the bid adjustment must be carried out on the premise that the double hook does not touch the bottom. Once the hook hits the bottom, the adjusted bid will not be accurate, and novices must pay special attention to this.

Single hook adjustment: before adjustment, cut off the bottom hook and keep only one hook. People who like to adjust the standard in this way emphasize that one hook must be undercover and the other hook must touch the bottom when fishing, so there is no need to think so much between fishing. This method is simple and practical, and is adopted by most middle-aged and elderly people. For example, if you are used to fishing with three eyes, adjust it to a single hook and half water with three eyes, ignore the weight of a hook, and put a pair of the same auxiliary lines after adjustment. When fishing, keep the buoy out of the water for three eyes. At this time, the bottom hook must be undercover, and the hook also touches the bottom.

4. Calibration of actual fishing state: The whole calibration process must be completed in actual fishing state.

(1) Adjust the standard at the fishing point after determining the fishing point;

(2) Adjust the standard with the determined line group;

(3) When fishing, the big line enters the water, and when the standard is adjusted, the big line also enters the water. When fishing, use a pole to fish. If the long line does not enter the water, do not enter the water when adjusting the standard.

(4) Be sure to adjust the scale after the buoy and line group fully absorb water (after soaking for half an hour), otherwise there may be one or two differences for buoys with high sensitivity.

5 Half-water calibration: The indicator timing double hook must be suspended, instead of the waterline being half of the water depth. For example, if you drift at a depth of two meters, you don't want to use a one-meter waterline to adjust. If the standard is really adjusted in this way, it may not be allowed. Because when you adjust the standard, the weight of the one-meter waterline is not included in the counterweight, and for a highly sensitive buoy, the difference may be more than one eye.

6. Rough adjustment: Before the buoy is officially adjusted, rough adjustment shall be carried out first, then the standard bubble line shall be soaked while throwing the pole to make a nest, and the standard adjustment shall be officially carried out half an hour later; Because both the buoy and the fishing line have micropores, they will absorb some water after entering the water. This rough adjustment method is to make the dry standard and trunk line fully absorb water before fine adjustment to ensure the accuracy of the adjustment standard.

7. Fine-tuning: Fine-tuning is usually after calibration. In actual fishing, it is found that the buoy language is not accurate, only a very small amount of lead skin increases or decreases or the buoy moves up and down slightly. For example, it is found that the buoy has a signal, but no fish can be caught by lifting the pole, or it often happens that the pole runs underwater. It is not necessary to adjust the lead weight, just move the buoy up by one third, which can play a fine-tuning role. You can also add a little lead skin to the lead pendant without moving the buoy, so that the fisheye can move up a little; If you start with five catches and three catches, and add small lead, it will become five catches and two and a half eyes. These methods are fine-tuning.

8. Alignment: It means that the buoy crosses the balance point of the water surface after adjustment and is at the height of the target. For example, adjust two spirits, adjust two spirits and three spirits. But this spirit is conditional, not absolute, and it changes with the change of conditions.

For example, I set three eyes, and the double bait just sinks the buoy into one eye. At this time, the self-weight of the double bait in the water is zero. If one eye is replaced and the double bait is as heavy as mentioned above, then the adjustment of three catches and one catch at this time is more effective than the adjustment of one catch in static theory.

Because of this, the two baits are completely balanced by the buoyancy of the buoy because of their own weight, and the fish can suck the bait into its mouth with a little suction.

After fishing for a period of time, the self-weight of the double bait is at the bottom of the water, and the fish will eat it except that the buoyancy generated by water on the bait can reduce a small part of the self-weight of the bait. Only when its suction force is greater than the self-weight reflected by the bait will the bait be sucked into the fish's mouth. This is better than tuning three. If the weight of the double bait is still two eyes, now it is changed to four eyes and two eyes. Compared with the above three methods, the dead weight of double bait is zero, and the result is that three catches one is better than four catches two. Because of adjusting four to catch two, the residual buoyancy of the buoy exposed to the water is greater than adjusting three to catch one. Moreover, the diameter of the target of the second destination may be thicker than that of the first destination, and the volume of the second destination is larger than that of the first destination if calculated according to the same length. Then, when the fish suck bait with the same strength, the displacement and speed produced by three buoys will be greater than that of four buoys with two floats.

From this point of view, the fewer buoys there are (the lower they are exposed to the water), the more sensitive they are, and vice versa.

9. Leveling water: refers to setting the balance point of the buoy at the top of the sight to make it flush with the water surface. Leveling water includes empty hook leveling water and bait leveling water. If you are all fishing with one eye, it is more effective to level the water with bait than empty hook, and the reason is the same as that stated in Article 9.

10 adjustment: by adding or subtracting lead skin, it is the balance point where the buoy intersects the water surface. If you adjust your gaze to the third eye, you are adjusting the third eye. Look out of the water to the fourth eye, then you are adjusting your eyes.

1 1. Fishing mesh: refers to the number of buoys exposed to the water during actual fishing. Setting the fisheye and adjusting the fisheye during fishing are based on the adjustment of the fisheye, which further adjusts the sensitivity of the buoy.

The principle of adjusting the fisheye is that the fisheye is lower than the fisheye, and the limit is that the two baits are off the bottom (like adjusting three to catch one); When the fishing eye is higher than the adjusting eye, it will be dull until the lead falls to the bottom (like grasping the belly root by adjusting the second). Adjust and fish several times, which is based on this adjustment. Fishing should master the adjustment principle of a buoy: eye adjustment is the foundation and fish eye is the correction. If the setting of the adjusting eye is wrong, no matter how to adjust the fishing eye, the effect may not be ideal, because it is impossible to correct a good effect on the basis of error.

12. Buoy balance point: it is the "fishing eye" of the buoy. When a buoy is stationary on the water surface after online counterweight, the straight line where the pointer of the buoy intersects the horizontal plane is the equilibrium point of the buoy at this time. At this time, the buoyancy generated by the buoy in the water is equal to the gravity formed by the line group, and it is in a two-force level state.

Some people say that I use a small buoy, and the lead drop is big (the gravity of the lead drop is obviously greater than the buoyancy). How to balance it? As a matter of fact, the gravity of the part of lead falling out of buoyancy is borne by the ground, so as long as the waterline length is adjusted, the static buoy above the water surface is also in a state of balance.

The characteristic of buoy balance point is that any point of beacon can be a balance point, but it will change with the change of line group weight. When the weight of the lead pendant is increased or decreased, the waterline length is lengthened or shortened, and hooks, space beans, floating seats, lead seats and figure-eight rings with different weights are replaced, the balance point of the buoy will change.

Especially in bait-hanging fishing, when the bait is dissolved and unhooked, the buoy with high sensitivity will float obviously. This is that the original balance point has been broken and the buoy is seeking a new balance point. When the buoy floats to a certain position, a new balance is created.

13. Residual buoyancy: When the buoy is in equilibrium and at rest, the indicator part exposed from the water surface is called residual buoyancy. The more eyes above the water, the greater the residual buoyancy, and vice versa.

14 buoy's own language: when the buoy enters the water, it is in a state of balance. In the meantime, he showed six languages of his own: turning over, standing, pausing, sinking, rebounding and positioning. These six languages have their own specific laws. If there are fish in the middle, it will inevitably break the specific laws of these six languages.

15. Fish message language of buoy: The signals generated by fish eating bait are all fish message language. The language of fish information before floating and positioning is sometimes very obscure and difficult to master. Only when you know the language of cloth tickets very well can you distinguish them.

The news language of floating fish can be divided into three categories: news language, flood language and news language.

16. Signal-throwing: When lead falls into the water, it sinks with the bait and the buoy until the bait sinks to a certain position, during which time fish come to eat. The signal-throwing language displayed by the buoy belongs to signal-throwing. The information language of this fish is mixed with the language of the buoy itself, which is sometimes difficult to distinguish without careful observation.

Message board is the most colorful message board in hand-held crucian carp fishing, which brings different pleasure to crucian carp lovers and belongs to an alternative enjoyment. The movement of this buoy in motion (the expression process of its own language) (the appearance of fish information language) brings a sense of elegance to fishermen.

The concrete manifestation of the lost sign language is that the rules of the buoy's own language are broken (except for positioning), that is, the lost sign language appears (except for other factors).

17. Signal language: This language appears after the bait is in place and the buoy is stationary. Generally speaking, there are four representative languages: next meal, floating next meal, bid delivery and black label. Looking at the signal language of fishing bottom, you don't have to be in a state of high tension as soon as you enter the water from the buoy, because the fisherman clearly knows that nothing will happen before the bait is in place, and everything will appear after the buoy is positioned.

18. The second message: Do not eat the fish caught at the bottom. In desperation, they gently pull the buoy to drive the bait to leave the bottom of the water and sink again, so as to lure the fish into the bait (I call this passive method of attracting fish "disturbing the bait"). The fish information language that appears between the bait leaving the bottom and repositioning is the second information language.

There are several expressions in the language of secondary communication:

(1) After the buoy is pulled up, it should sink again within a certain period of time. If it doesn't sink after this time, it means that the fish has sucked the bait into its mouth at the moment when it left the bottom.

(2) When the buoy sinks again, it suddenly accelerates to sink. This is when the fish sucks the sinking bait into the mouth at the bottom and pulls the buoy, causing the buoy to accelerate its sinking.

(3) When the buoy is pulled, it fails to float in time. At the moment of pulling the buoy, the fish sucked the bait that had just left the bottom into his mouth and held the buoy in his mouth to prevent it from floating.