What is the reason why the button of the toilet tank doesn't move? How to fix the toilet button if it doesn't rebound?

The toilet is something that every household has, and it is very convenient to use regardless of men, women and children. However, with daily use, there will be some faults in the toilet. The toilet has a flush valve, which will automatically rebound after flushing. However, due to a malfunction, some buttons cannot bounce back, so they will always remain flush. At this time, many people don't know what to do. The following small series will introduce the reason why the toilet tank button does not move and how to fix it.

First, what is the reason why the toilet tank button does not move?

1, the toilet tank button can't be pressed. It may be because the spring in the toilet button is rusted and aged, or it may be because the water outlet valve is stuck by debris such as sediment.

2, press the button on the side of the toilet, the toilet does not flush, it may be that the wire control line of the toilet is broken, and the corresponding parts need to be replaced.

3. The button of the toilet water tank can't be pressed, which may be because the outlet valve is stuck by debris such as sediment, or it may be because the outlet valve is aging.

4. The button on the toilet tank cover can't bounce back after being pressed, which may be caused by rust and aging of the spring in the toilet button. Need to replace a spring, or directly replace the toilet button.

When flushing the toilet button, the impulse is very weak. First, check whether there is water in the water tank and whether the water level is high enough. If not, it should be the fault of the inlet valve. Check whether the water inlet pipe is blocked and whether the float of the water inlet valve can move up and down freely. Otherwise, the outlet valve may be faulty.

6. The switch on the side of the toilet tank does not flush. If it is a zipper outlet valve, the zipper may be too long or broken. Cut it short or replace it with a zipper.

Second, how to repair the toilet button without rebounding?

1, it is very likely that the spring has exceeded its own spring coefficient in a certain use process and cannot be restored to its original state.

2. If it is still a spring problem, it may be that the spring is aging, because aging will make it brittle, which will lead to the failure to return when flushing.

If it's not the spring, the water outlet may be blocked when you just press it, which will really lead to failure.

4. If the button switch is broken, you can take out the ceramic water tank cover and press the button with no load to see if it can rebound. If it can bounce, it means that the button will not be broken. The problem is that your drain valve is faulty. If it still doesn't rebound, it means that the button is really broken and needs to be replaced.

The above is about the reason why the toilet water tank button does not move and how to maintain the toilet button if it does not rebound. I hope I can help you.