Summary of quality manager's probation work

Time flies, the probation period has passed in a blink of an eye, and we can become full members soon. The following is my summary of the quality manager's probation period, for your reference only. Welcome to reading.

Quality manager's probation work summary turns positive. Time flies, and the probation period of several months is fleeting. Chewing slowly, I think this time is a precious memory in my life. I not only gradually deepened my understanding of work. In a word, as a manager of quality inspection department, I have made a lot of progress, but there are still some shortcomings. In order to work better in the future, sum up experience and learn lessons, I specially summarize my internship for several months as follows.

I. Work review, combing and summarizing experience and methods During my internship, I served as the manager of quality inspection department, mainly responsible for supplier control measures for incoming inspection of plumbing fittings.

When I first came into contact with this job, I found that the suppliers were not standardized enough, and the phenomenon of mixed fish and dragons occurred from time to time. Therefore, combined with theoretical study and practical experience, I summarized and implemented the following supplier control methods:

First, strengthen the quality awareness of suppliers. Analyze incoming data every month, coach, communicate and visit suppliers who mainly affect materials, improve suppliers' quality awareness and strengthen quality management mechanism; The supplier is required to establish quality control points such as feeding, process and final, and the nonconforming products produced in the first article or process need to be classified, isolated and identified. Send it to our company for confirmation when necessary, and resolutely put an end to mixed loading.

The second is to optimize the evaluation criteria of new suppliers. Clarify and strengthen the minimum threshold for new suppliers, requiring them to have quality experts or provide relevant quality reports as required by us.

The third is to take punitive measures against unqualified suppliers. Punish or directly cancel the qualification of suppliers according to the seriousness of the acts confirmed as malicious mixing; Suppliers with repeatedly unqualified incoming materials will be blacklisted, and if the circumstances are serious, procurement will be suspended. The supplier is required to provide written "corrective measures" within the specified time, and purchase after verification and confirmation.

The fourth is to regularly evaluate the industrial efficiency of suppliers. The quality inspection department will cooperate with the purchasing department to re-evaluate the industrial efficiency of suppliers on a regular basis, avoid ideological slack and quality loopholes once and for all, and reorganize the list of qualified suppliers and supplier ratings. In addition to innovatively implementing the control method of incoming inspection, I also conscientiously implemented the work plan of incoming inspection, process inspection and final inspection, which not only improved the quality inspection level of plumbing fittings, but also improved the overall quality of the company's products.

Second, do it yourself and appreciate the gains from your work. In my impression, the manager of quality inspection department is a simple job. But only when I really put myself into my work can I appreciate the charm of the details of this job. Let me talk about my experience and gains in my work. One short step makes an everlasting regret. In order to avoid mistakes and missed inspections caused by low-level mistakes such as lack of posts, I often go to the site for inspection. In the process of inspection, I implement the system that the previous procedure is responsible for the next procedure and the next procedure is rechecked. "Try to do better" is the biggest feeling and gain during my internship. As the manager of quality inspection department, I gradually realized that I should not only have knowledge of technology, materials and inspection, but also have comprehensive management ability, market awareness, be familiar with the relevant contents of product budget and price control, and fully grasp the contract terms signed with suppliers. Although I had similar experience in my previous job, this internship made me more aware of the importance of continuous learning, continuous progress and comprehensive enrichment. Besides, I also realize that in practice, we should constantly change our working methods, strengthen communication and keep close contact with other departments. Find a correct position in the work, convince people with emotion, convince people with reason, strive for the understanding and trust of other departments, and create a harmonious quality inspection environment. Of course, we should not only strengthen unity in the process of work, but also pay attention to our words and deeds in peacetime, be modest and prudent to superior leaders, and respect and obey; Be strict with your colleagues and be lenient with others; Communicate with suppliers to seek a win-win situation. We will carry out the principles of not despising superiors, not treating subordinates arrogantly, and being supercilious to the outside world.

Third, clarify the responsibilities and realize the shortcomings in the work. Quality inspection is a continuous work. The society is developing, the times are progressing, and the characteristics of products are constantly updated. As the person in charge of the quality inspection department, we must discover, study and solve new situations and problems in spare parts quality inspection and management in time with high sensitivity and consciousness. Only in this way can I finish my work dutifully. Let me talk about some shortcomings of the probation period.

First of all, the supplier's quality control methods still need to be improved. During the * months of my internship, although the mixing rate has dropped significantly, there are still some suppliers with weak quality awareness, and the mixing phenomenon still exists in plumbing fittings, with a high defective rate. Of course, this is also related to our irregular management. In the next step, we will continue to sum up experience from practice, improve supplier quality control methods and strictly abide by them.

Second, there are still false detections. In the process of quality inspection, it is inevitable that there will be mistakes and omissions, which are often caused by drawing errors and abnormal measuring tools. However, during the internship, through the investigation and analysis of the inspection process, I think that the problem of missing inspection of plumbing fittings is mainly due to the heavy workload of inspectors and the small sampling coverage. This shows that I didn't consider the personal ability of inspectors when assigning work, and I also lacked innovation in inspection methods.

Looking forward to the future, talking about the good atmosphere of my work planning company has given me a broad platform. Here, I feel like a duck to water, not only strengthening my professional ability, but also learning to manage my own team, learn to cooperate with other departments, and learn to be responsible for employees and enterprises. I am full of expectations for the future. Based on the above gains and shortcomings, I make the following plans:

First, improve the quality management level, on the one hand, combine the problems in practice, summarize and think more, continuously improve and implement the supplier's quality control methods, and strive for perfection; On the other hand, efforts should be made to improve the operation skills of quality inspectors, formulate detailed and specific training plans, improve the professional skills of employees, and repeatedly publicize the knowledge and operation of key processes, focusing on discussing and learning the problems found in the work and solutions to avoid quality problems caused by human factors.

Second, improve innovation awareness and skills, strengthen exchanges and cooperation with suppliers, and seek more perfect cooperation opportunities. In the long-term procurement process, we will gradually eliminate some suppliers with poor reputation and poor quality, and choose suppliers with good market reputation and large scale as long-term partners. This can not only ensure the quality of supply channels and materials, but also ensure the reasonable price, and to some extent, it can also alleviate the pressure of fund operation in the procurement department.

The third is to enhance team cohesion. There is a good saying, "Many times, miracles don't need too many reasons." I will pay attention to the development of every employee with love and stimulate the potential of every quality inspector with persistent efforts. I believe that the quality inspection department will be the creator of miracles.

The above is a summary of my work in the past x months. This is not so much a standardized report as my view of the past *

Last month's work review was a deep self-dialogue. On the road to success, it is inseparable from the care and love of leaders.

The help of colleagues, but more inseparable from personal efforts and struggles. I cherish this job very much. I am willing to ride the wind and waves, constantly improve my professional level and comprehensive quality, and do my part for the development of the company to achieve a win-win situation for both individuals and enterprises!

Summary of the work of quality manager's probation period becoming a full member II. In a blink of an eye, I have been practicing in the project department for almost half a year. With the guidance and help of the leaders of the project department, I successfully completed all the work. From knowing nothing about the experiment to being able to complete all the experiments independently. During this period, the guidance and help of the director and colleagues are essential. Here I make an internship summary from three aspects.

I. Work

I love my job at work, can abide by the management system of the project department, obey the arrangement of the leader at work, and can actively learn the relevant rules and norms of the experiment. Don't bother to learn from the director and colleagues if you don't know. Be familiar with the experimental work in a short time and master the methods and steps of various experiments. Understand various technologies of materials, such as cement test, steel bar test, sand aggregate test, concrete test, etc. , and in-depth sampling of the construction site. Fill in the relevant data of each test carefully, collect and sort out the original data of each test, and establish data files layer by layer. Familiar with the operating procedures and instrument maintenance of various instruments and equipment.

I studied the operation of electromechanical equipment in hydropower plants at school, but when I came to the project department, I didn't have a job corresponding to my major. The project manager had to put me in the quality inspection department as an experimenter. At first, I knew nothing about the exam. I learned a lot about exams by reading various exam rules and norms. For example, to do cement test, we should know the mortar strength, stability and setting time of cement, as well as cement sampling, which can be divided into bagged cement sampling and bulk cement sampling. Then the test of sand, including sieve analysis, silt content and silt content. The sampling of sand is a group of samples for each batch acceptance, and the samples are divided by artificial quartering method. As for the flat plate, each group of samples is mixed evenly in the wet state, divided into two perpendicular straight lines, and then mixed evenly by taking two diagonal lines. Repeat the above process until the required amount is tested. The third is the test of crushed stone and pebble, which includes sieve analysis, silt content, silt content, total content of needle-like particles and crushing index value. The fourth is the tensile test and sampling of steel bars. The sampling length of raw materials for each steel bar is 50 cm, and every three steel bars are a group. There are many skills in learning experiments, and you can gain happiness from your work. To do a good job, I think the most important thing is to have a sense of responsibility. If you have a responsibility, you will take it to finish it and finish it well. Falling in love with your work, the project often advocates that everyone should do their own work well, which is an invisible responsibility, urging me to work hard in this direction and constantly improve and upgrade.

Second, life.

After coming to the project, the people on the project were very kind to me, and they didn't say I was a newcomer. Instead, he took care of me and asked them what difficulties I had. I quickly integrated into this big family. Life is actually very simple, as long as you live happily and fully every day. Let the mood relax and say to yourself if you have any difficulties: I can do it, I can do it, I can do it.

Third, thought.

Do your job well again, start from me, start from now, start from the little things around you, and persevere. Do your best in your job and make unremitting efforts. I will constantly improve my job skills, strive to master my job knowledge, and do my work in a down-to-earth manner. Actively learn from the predecessors. I always keep a modest and prudent attitude in my work, and learn from their hard-working and pragmatic work style and problem-solving methods.

Summarizing our own experimental work, although we have made some progress, there are still many shortcomings in some aspects, and individual work is not perfect enough. I will work harder and constantly improve my experimental skills, which need to be improved and improved in my future work. Better complete the tasks assigned by the leaders, broaden the thinking, deepen and refine their own work, and actively contribute to the project department.

Summary of the work of quality manager's probation period. Under the correct leadership of the warehouse leaders, everyone cooperated sincerely and fought side by side, always focusing on ensuring the real quantity, good quality, safe storage and standardized management of the central grain reserves, ensuring that the state can call them at any time, actively carrying out the work, and successfully completing all the work assigned by the warehouse. The main work is summarized as follows:

First, dare to fight and fight, and successfully complete the inspection task of * 10,000 tons of grain reserves.

In order to successfully complete the task of entering grain, the inspection department has made full preparations and formulated a perfect plan. According to the actual situation of new staff, heavy workload and inexperience, on-the-job training was carried out for the staff, and many drills were conducted. Some problems affecting grain quality were found and corrected in time, and five things were achieved: the required laboratory and grain feeding equipment were ready, the psychological adjustment of the staff to meet the tough battle was in place, everyone's post responsibilities were put in place, and their quality was improved. In many days and nights, the staff of the inspection department showed high quality and strong sense of responsibility, tenacious style, proactive work, not afraid of being dirty and tired, and willing to bear hardships. The fruits of victory include the sweat of front-line employees. As a laboratory technician, I strictly abide by work discipline, adhere to objectivity and fairness, adhere to principles, resist all kinds of pressures, bite the bullet and "play the bad COP", strictly control the quality of inspection, eat and live at work, and take a break. Practice has proved that our team can stand the test.

Two, step by step, strengthen the inspection of grain storage, to ensure food security.

The quality and safety of stored grain is not only our focus, but also the focus of the inspection department. I paid a heavy price to ensure food safety. Strengthen the detection of key parts according to the requirements of xx, and analyze and deal with problems in time. Make the stored grain in a safe and stable state.

Third, strive to strengthen study and improve quality.

1, actively participated in the study of business etiquette and grain depot management norms organized by the office, broadened my horizons, improved my understanding, clarified my responsibilities, and guided my work with the norms of warehouses.

2. Form a system of two sessions and create a good atmosphere of "comparing, learning, catching up, helping and surpassing". In view of the new and inexperienced personnel in the warehouse department, we hold weekly warehouse meetings and monthly inspection and analysis meetings, give full play to comrades' subjective initiative, gradually cultivate inspectors' good habits of observing frequently, thinking more and summing up well, strengthen the awareness of safety in production, and improve the ability to find, analyze, discuss and solve problems in work, so as to keep our word, which not only improves our professional level, but also improves our language expression ability.

3, business training, improve the quality of inspection department staff. By sending them out to train storekeepers and laboratory technicians, and giving lectures to old storekeepers to train new storekeepers, the professional quality of storekeepers has reached a new level, and the inspection work has reached a new level.

4. Strengthen the education of guarding the head and enhance the concept of party spirit. Improve the political quality of staff and workers, arm themselves with advanced ideas, and apply them to work deeply, and firmly establish the idea of "taking the library as home and being proud of me".

In short, the inspection department has always focused on grain storage management and actively carried out various tasks around the overall goal of grain storage management, cultivating healthy qi, restraining evil spirits, strengthening quality and grasping management. In just one year, the employees have taken on a new look and the overall quality has been greatly improved.

Four. Shortcomings of work and prospects for next year's work

In the past year, although I have made some achievements in my work, there are still many problems and shortcomings. The quality and professional level of employees need to be improved, the implementation of various systems is not strict, the subjective initiative is not strong, and the work attitude needs to be improved.

Looking forward to this year, I will always put the safety of grain storage in the first place, attach importance to taking effective measures ideologically, constantly innovate in technology, constantly explore new technologies and methods for testing grain, strengthen the management of central grain reserves, and move towards a "green, civilized and harmonious" grain depot. Strengthen ideological education, correct work attitude, establish a good sense of responsibility, constantly strengthen the accumulation of learning and knowledge, and strive to cultivate excellent ideological quality, diligent professionalism, superb professional ability and pragmatic work style. I want to have a sense of crisis and urgency, always devote myself to all the work with full enthusiasm, and strive for new breakthroughs in all the work around the two themes of "people-oriented, building a harmonious environment" and "implementing the system and standardizing management"

Summary of quality manager's probation work. With the support of company leaders and departments, the quality department has strengthened inspection and supervision.

In the operation of the "three standards" system, the quality management department undertakes many elements, and is also responsible for the operation planning, implementation, supervision and improvement of the quality management system.

I. Report on the Work Completion of the Quality Department this year

1. raw material inspection, process inspection and finished product inspection were carried out, including base paper inspection and starch inspection. Process inspection takes the form of sampling inspection and patrol inspection, and finished product inspection assists production inspection related data and printing plate die cutting. (Base paper inspection, printing plate die cutting inspection)

2. In the quality system work, through daily inspection and internal audit, standardize the working procedures of various departments, coordinate the communication between various departments, and straighten out the development of various work of the company. Conduct a daily inspection once a month, announce the problems existing in each department, and verify the completion in the inspection next month. 3. The Management Manual and Procedure Document have been revised according to the actual situation and will be released after the organization is determined. And the program documents and the three-standard system were trained for x times, and the training time was ***xx people.

4. Summarize and analyze the quality objectives and indicators of the company and all departments, and post the completion in the company. According to the preliminary research guidelines and objectives of internal audit, it is in line with the company's current situation. (Attached to the monthly summary of the company's target indicators)

5. Publicize the quality system and quality management through exhibition boards every month; (Once a month from 10)

6. Assist the sales department in customer survey, and * * * investigate xx company, including major customers. This paper summarizes and analyzes the customer satisfaction survey of the marketing department.

7. Contact Inner Mongolia Institute of Metrology to verify and calibrate the company's monitoring and measuring equipment, and compare some measuring equipment. X measuring devices were approved in xx, and xx measuring devices were sent for inspection in xx.

8. Handling of "quality complaints" (see xx summary).

9. Product inspection. (The company's third-floor boxes and fifth-floor boxes were sent to Inner Mongolia Production Inspection Institute, all of which passed the inspection and obtained the inspection certificate)

10. Commodity inspection of export cartons (Yili liquid milk, Yili milk powder and other customers)

1 1, with Party A auditing once (see internal audit data) and Party B auditing four times (Shi Yao, Yili, etc. ) and rectified the problems found in the audit.

12, "xx" was formulated, and the monthly inspection was evaluated by the scoring system.

Second, the quality of the next year's work arrangements

1. The above-mentioned projects continue and are constantly improved and perfected.

2. Strengthen the supervision of quality system work, conduct in-depth investigation and analysis of the company's procedures, and make the procedures both up to standard and practical.