What safety measures are there in the construction of brick carving of ancient buildings?

1. Before new mechanical equipment is put into use, it must be inspected, appraised and put into use in accordance with the technical test regulations and relevant regulations of mechanical equipment. Only after passing the inspection can it be put into use. The driving road of large crane must be solid and reliable, and its construction site must be leveled and reinforced, and the foundation bearing capacity can meet the requirements. The ground for hoisting operation shall be solid and flat, the feet shall be firmly padded, and there shall be no obstacles within the radius of gyration.

2. The construction site requires setting safety warning signs. Construction safety protection measures should be taken according to the characteristics of each season. When the wind speed reaches level 6 or above, hoisting operation cannot be carried out, and thunderstorm weather should be prevented.

3. The ancient building decoration construction site must send signal commanders, contractors and riggers with rich hoisting experience, and be familiar with the safety requirements of the operation. Before construction, the operator must have a physical examination, and those who suffer from diseases that are not suitable for aerial work may not arrange aerial work. Operators must hold relevant certificates, and hook personnel must be relatively fixed.

4. During the construction of ancient buildings, try to avoid cross operation. The construction site should be clean and tidy, and the equipment and materials should be placed in designated places. After the work is finished, the locomotive should be parked as required, and the power supply should be cut off before leaving.