Summary of energy saving work

Time is an arrow, and it comes and goes quickly. A period of work has come to an end. During this period, I believe that everyone has faced many challenges and gained a lot of growth. The past achievements have been compiled into a work summary. Bar. So how to write a new way of working summary? The following is a summary of energy-saving work that I collected and compiled (5 general articles), I hope it can help everyone. Energy Saving Work Summary 1

In order to fully implement the national “Twelfth Five-Year Plan” energy-saving binding goals, our project has conscientiously carried out energy conservation and emission reduction work in accordance with the requirements of superiors. The project closely focuses on the theme of "energy saving and emission reduction, scientific development", adapts measures to local conditions, conducts in-depth exploration, and adopts various forms to integrate energy saving and emission reduction work into our work and life.

1. Attach great importance, strengthen measures, and actively carry out energy conservation and emission reduction work

Increase the publicity of energy conservation and emission reduction, extend publicity and education to the grassroots, and guide employees to establish energy conservation awareness. The project closely focused on the national energy-saving publicity theme "Energy-saving I act, low-carbon new life", combined with the actual situation of the project, carried out multi-level and multi-angle publicity, held a special energy-saving publicity mobilization meeting, and used pre-shift and after-shift meetings to Promote energy-saving activities and the significance and importance of saving energy and improving energy efficiency.

2. Strengthen responsibilities, highlight key points, and strengthen supervision and inspection

Formulate specific measures and guarantees, strengthen responsibilities, and pay close attention to implementation. Within the scope of the project, the responsibility for various equipment, power sources, and water sources should be assigned to each person, so that everyone is responsible for everything and everyone is responsible. We also regularly inspect the energy conservation and emission reduction work of each project, and supervise and inspect the implementation of energy conservation and emission reduction work in each specific project.

The project technical department actively improves the production process from the technical aspect, maximizes the rational use of materials, reduces material waste, promotes the recycling of remaining materials, and realizes the recycling of recycled materials to ensure the maximum use value of materials. The project comprehensive department reports in advance the use of public buses, conducts comprehensive and unified deployment, strengthens carpooling, reduces the number of bus trips, and reduces gasoline and diesel consumption. Water metering management, strictly control production and domestic water use, avoid blind, unplanned and unmeasured abuse of water resources, put an end to the phenomenon of long running water, deal with leakage, leakage, dripping and leakage in a timely manner once discovered, strengthen publicity and education, and enhance employee water conservation consciousness. Post an "energy saving" sign at the power switch of the project, designate a dedicated person to be responsible for the power switch after get off work, put an end to constant lights, and regularly eliminate and update equipment and facilities with excessive energy consumption and backward technology to achieve the purpose of energy saving and efficiency improvement. Consumable supplies for printers and copiers (printer toner cartridges, ink cartridges, ribbons) should be refilled and used multiple times. When purchasing office and daily necessities, the plan approval system is strictly implemented, the quantity and cycle are strictly controlled, and old items are exchanged for new items.

Energy conservation and consumption reduction is a task that must be persisted for a long time. It requires starting from "saving every drop of water, every kilowatt hour, every piece of paper" in daily work, and developing good energy-saving habits. and behavior. In the future, we will further strengthen energy conservation work, effectively focus on node, water and energy conservation work, and form a good atmosphere of energy conservation for all people. Summary of Energy Saving Work 2

Since our company started energy conservation and consumption reduction, we have relied wholeheartedly on the wisdom and strength of our employees and through subjective efforts to resolve business risks caused by various factors such as tight energy markets and fierce competition. Create an energy-saving atmosphere throughout the factory, seize energy-saving opportunities, tap internal potential, and carry out energy-saving work for all employees on a sustained basis, so that employees can save a glass of water, a drop of oil, a kilowatt-hour of electricity, a piece of paper, a screw, and a pair of gloves. Start, reduce costs, relieve pressure on the factory, and accumulate energy for the development of the factory.

1. Establish restraint, supervision and incentive mechanisms to form a long-term mechanism for the development of conservation and conservation culture.

To build a conservation-oriented factory, strengthening leadership is the key, fulfilling responsibilities is the guarantee, and forming conscious awareness is the foundation. In particular, it is necessary to effectively encourage conservation through systems, effectively curb waste through systems, and continuously optimize the external and internal environment for building conservation-oriented factories, thereby forming a long-term mechanism for saving resources and ensuring that the construction of conservation-oriented factories continues to be carried out in depth.

In 2006, the company established an energy-saving performance evaluation system and an energy-saving reward and punishment system, and arranged an energy-saving reward fund of 100,000 yuan. The specific work is as follows: First, formulate behavioral norms, establish relevant management systems, and form an effective supervision system. The second is to include training, focusing on promoting new conservation technologies and helping employees master new skills and new methods of saving resources, actively carrying out employee education and training, incorporating employees’ conservation concepts and abilities into employee training plans as long-term work, and continuously cultivating employees. Sex education to improve employees’ ability to save resources. The company regularly organizes business learning and training for energy measurement, statistics, management and operating personnel, and organizes regular energy-saving publicity activities. The third is to implement the indicators. In accordance with the KPI assessment requirements, the assessment indicators are implemented in all departments, teams, and even each position to form a scientific and complete responsibility system. The fourth is achievement rewards, linking work performance with savings results, constantly mobilizing employees' enthusiasm for participating in conservation, and closely integrating energy consumption reduction and expense savings with employees' own interests. The fifth is regular evaluation, establishing a regular performance evaluation system for cadres, talents and employees. Through the assessment of quantitative indicators for factories, departments and individuals, the factory strategy is organically combined with personal goals, resource allocation, incentive systems, and assessment evaluations to promote the formation of a long-term mechanism for building a conservation-oriented factory.

2. Guided by the spirit of building an energy-saving society, incorporate the construction of energy-saving factories into the factory development strategy and important work schedule.

First of all, while formulating the company's "Eleventh Five-Year Plan" energy-saving planning goals, we carefully formulate medium- and long-term implementation plans (details) and plans for building a conservation-oriented factory, organize the implementation and formulate specific and feasible work goals, Management measures, clarify the guiding ideology, purpose requirements, understand the situation, identify the correct problem, find the correct positioning, and clearly define. In the "Implementation Plan", we have established 10 key saving projects and 14 specific saving contents and requirements. Secondly, establish a work leading group headed by a legal representative and establish a leadership responsibility system. Finally, we broke down the implementation plan (details) into specific indicators for teams and individual employees, and established detailed goals and supporting measures; the implementation plan included both conservation-oriented improvement topics and energy-saving and consumption-reducing goals. We also strictly implement national energy conservation laws, regulations and policies, and consciously accept supervision from the government and the public.

3. Use advanced management ideas and methods, establish a complete monitoring system, and strengthen detail and process management.

Strengthen the independent maintenance of equipment. At present, some of the factory's production equipment is aging, and some of the production equipment's "service life" is more than 10 years, and there are serious "running, leaking, dripping, and leaking" phenomena. By comprehensively carrying out independent maintenance of equipment, we can achieve the purpose of restoring equipment accuracy and improving the overall efficiency of equipment. Energy measuring instruments and instruments are reasonably equipped in accordance with national standards, and measuring instruments are regularly verified and calibrated to provide a strong guarantee for the construction of a conservation-oriented factory. We have established complete original statistical records and ledgers, regularly conduct energy balance tests, and submit energy utilization reports as required.

Strict cost budgeting and implement KPI target management. Comply with energy consumption quotas and limits per unit product and establish relevant management systems. Use the policy management system, cost indicator prediction and pre-control system and performance evaluation system to establish an energy consumption statistics system, decompose the total cost, implement one-way target values, implement specific and effective control of cost and expense indicators, and provide the basis for quantitative management , promote lean production. Continuously strengthen the monitoring of cost indicators by responsible units, and create a good atmosphere in which "everyone has indicators above their head, everyone has pressure on their shoulders, and everyone pays attention to the indicators." Carry out a census of resource consumption, promptly formulate and introduce key conservation content, key parts, and key links, and highlight the conservation of key energy-consuming departments such as production workshops. Continuously enhance employees' awareness of cost, responsibility and overall situation.

In accordance with the requirements of the Provincial Energy Conservation Office, an energy audit was carried out, an energy conservation plan was prepared and implemented effectively. An annual energy-saving plan was prepared, corrective measures were formulated and implemented.

Extensively promote QCD improvement work. QCD improvement is the source of corporate vitality and a magic weapon for reducing costs and waste within the company.

In 20xx, we improved the production organization, increased the utilization rate of off-peak electricity, and achieved a cost reduction of 750,000 yuan from January to May. On the basis of the results achieved, we will continue to increase our efforts to improve QCD, carry out QCD improvement work comprehensively, throughout the process, and in all directions, promote the continuous and in-depth development of this work, and gradually form within the factory "Everyone pays attention to conservation, The good atmosphere of "everyone participates in improvement" continuously eliminates waste in the factory.

Establish energy-saving technical standards, management standards, and work standards, and carry out production, operation, management, etc. in accordance with the standards.

Give full play to the effectiveness of the CFT team. By establishing a CFT project team and flexibly using the V-UP method, the key points of serious waste, important links of cost reduction, and key and complex issues in management and technology are taken as targets to determine improvement topics, grasp the current situation, analyze the factors, and plan Improve countermeasures, then implement them, and finally evaluate and confirm the improvement effects to achieve the purpose of reducing costs and eliminating waste. In the first half of 20xx, we faced heavy pressure from falling soybean meal prices and rising water, electricity and steam prices, which increased production costs. In order to avoid various risks and overcome the impact of price increases such as materials and energy, we have established 8 CFT teams through the effective operation of the CFT management model, and each department (workshop) has established 44 improvement topics to vigorously carry out energy conservation and consumption reduction. activity, the material utilization rate has increased significantly, from 75 to about 82, and the cost has been reduced by 1,742.11 million yuan, which has greatly digested the impact of various uncertain factors and provided a scientific basis for future scientific use of CFT as an activity form to solve problems and give full play to CFT. strength and accumulated valuable experience.

4. Construction of energy-saving and environmental protection assessment and evaluation index systems for pilot enterprises

In 20xx, Shandong xxxx Industrial Co., Ltd. produced 872,346 tons of soybean meal and 275,452 tons of salad oil, achieving The total output value is 5.80221 billion yuan, the comprehensive energy consumption is 29148.87 tons of standard coal, and the profit and tax is 175.61 million yuan.

1. The comprehensive energy consumption per ton (product) and the comparable energy consumption per 10,000 yuan of output value dropped to 33 kg of standard coal/ton and 52 kg of standard coal/ton respectively.

2. Energy saving

In 20xx (compared to the previous year), 1246.651 tons of standard coal were saved.

3. Energy saving rate

Energy saving rate = 1246. 651/29290x100 = 4.26

4. The emission reductions of SO2 and CO2 are 22.44 tons and 3116.63 respectively. tons (that is, the actual energy saving is equivalent to the reduction of SO2 and CO2 emissions, SO2 is converted at 0.018 tons/ton of standard coal, and CO2 is converted at 2.5 tons/ton of standard coal).

5. Energy saving benefits

Calculated based on the annual average market price of 860 yuan/ton of standard coal, 1246.651 tons of standard coal are saved, and the saving benefit is: 1.07212 million yuan.

5. Construction of the energy conservation and environmental protection target system

Completion of the targets promised by the enterprise in the "Pilot Implementation Plan for Participating in the Voluntary Agreement on Energy Conservation". By the end of 20xx:

(1) The comprehensive energy consumption per ton (product) and the comparable energy consumption per 10,000 yuan of output value have dropped to 33 kg of standard coal/ton and 52 kg of standard coal/ton, respectively, which are lower than the original plan. (Before signing the voluntary agreement, the same below) dropped by 4.85 to 28.26.

(2) Energy saving of 0.125 million tons of standard coal, energy saving benefit of 1.075 million yuan, saving 0.38 million tons of standard coal more than the original plan, and energy saving benefit of 326,800 yuan;

( 3) The energy saving rate was 4.26, 1.28 percentage points higher than the original plan; Summary of energy saving work 3

Since the beginning of this year, our hospital has conscientiously carried out energy saving work in accordance with the relevant requirements of superiors. We will now summarize the work progress As follows:

1. Strengthen leadership, unify understanding, and comprehensively deploy energy-saving work

The leaders of our hospital attach great importance to it. In order to prevent the energy-saving and emission reduction work from becoming a mere formality, we have established a system headed by the dean. The team leader leads the team, sets up offices and implements work tasks.

2. Carry out energy-saving publicity activities in public institutions

In order to strengthen the hospital employees’ awareness of danger and energy-saving, and further promote the construction of energy-saving institutions, our hospital closely focuses on "energy-saving" With the theme of "Low-Carbon New Life, Public Institutions Set an Example", we earnestly carry out energy-saving publicity activities. Paste energy-saving posters in eye-catching places in the hospital, and set up reminder signs such as saving water, saving electricity, and saving paper in specific areas such as sinks, air conditioners, and printers to effectively create a strong atmosphere of saving for everyone, saving everything, and saving all links. .

3. Overcome difficulties, deploy defenses step by step, and strictly control key key links

(1) Strengthen energy consumption statistics and improve energy consumption monitoring. In accordance with the requirements, we will strengthen energy consumption statistics, establish a work ledger, carefully verify various documents, truthfully record the original data, ensure that dedicated personnel monitor the data, and timely collect statistics on the monitoring situation.

(2) Reduce expenditure on bus use. Our hospital's official vehicles implement a unified management and office-approved and dispatched vehicle system to reduce individual or repeated dispatch of vehicles, and private use of official vehicles is strictly prohibited. Strengthen vehicle use management and implement systems such as fixed-point refueling and single-vehicle fuel consumption registration to minimize losses caused by human factors.

(3) Strictly conserve electricity. Our hospital starts by saving every kilowatt-hour of electricity and plugs wasteful loopholes. First, strengthen the management of electrical equipment. When using office automation equipment such as computers, printers, and copiers, it is required to minimize standby consumption. Secondly, open the air conditioner strictly according to the room temperature. When using the air conditioner, the doors and windows must be closed. When using computers, water dispensers and other electrical appliances, be sure to use them at any time and turn them on at any time, and avoid turning on the lights in offices with good lighting.

(4) Strengthen water conservation. Keep a detailed grasp of the monthly water consumption and the amount of water bills paid. If there is any abnormality, check the pipes immediately; renovate 15 foot-operated faucets in clinical departments to effectively avoid the phenomenon of water flowing during the hand washing process; strengthen the daily maintenance and management of water equipment, and cultivate Make it a habit to turn off the taps to prevent leaks.

(5) Saving office supplies. Document paper is printed on both sides, and blind printing operations are prohibited to reduce unnecessary waste. The use of other office supplies strictly follows the principle of unified purchase and economical use, and the energy saving work is implemented.

4. Existing Problems

First, the energy-saving awareness of hospital employees needs to be further improved, and they still lack sufficient understanding of the importance and urgency of energy-saving and emission-reduction work and participate in energy-saving and emission-reduction work. The enthusiasm and initiative are not strong yet; secondly, there is insufficient funds. Although a certain amount of renovation funds have been invested this year, due to lack of funds, the need for further energy-saving technological transformation cannot be met.

In the future, we will continue to implement the work of energy conservation and consumption reduction. In accordance with the requirements of the Scientific Outlook on Development, we will pioneer and innovate, seek truth and be pragmatic, and constantly explore new ideas for energy conservation and consumption reduction, so as to contribute to the construction of ecological cities and Contribute to a conservation-oriented society and “green hospitals”. Energy-saving work summary 4

Energy-saving and emission reduction work has not only greatly improved economic benefits, greatly increased fiscal revenue, and greatly improved people's lives, but also greatly improved the investment environment and made great contributions to curbing climate warming. To make a positive contribution, our approach is:

1. Strengthen learning, raise awareness, and further enhance the sense of responsibility and mission for energy conservation and emission reduction.

With the development of industrialization, global climate warming has become an urgent problem that humans must take seriously and solve. The deterioration of the environment has also sounded the alarm for people. To this end, the country has proposed a good and fast development, and has adopted a series of measures to strengthen environmental protection, strengthen energy conservation and emission reduction, and ultimately achieve scientific development. Facing the new situation and tasks, we carefully organized cadres and the masses to learn, improve their understanding of energy conservation and emission reduction, and enhance everyone's enthusiasm, sense of responsibility and sense of mission.

2. Strengthen responsibilities, highlight key points, and further improve the pertinence and effectiveness of energy conservation and emission reduction work.

To do a good job in energy conservation and emission reduction, specific measures must be taken to ensure it, and responsibilities must be strengthened and implemented very carefully. First, we have implemented target management and signed responsibility letters at all levels so that everyone has indicators and responsibilities; second, we have strengthened supervision and inspection, and implemented rewards and punishment measures; third, we have increased investment, especially in scientific research and development, and promoted advanced technology, transform backward production equipment and production processes, and improve efficiency; fourth, vigorously carry out mass energy-saving science popularization activities, do a good job in publicity, create a good atmosphere, and mobilize the enthusiasm and creativity of the masses; fifth, insist on starting from childhood, Enrich the educational content on energy conservation and environmental protection, carry out a variety of innovative and practical activities among primary and secondary school students, and enhance the awareness of primary and secondary school students. Through the above work, we have made great progress in this work.

3. Strengthen leadership and pay close attention to implementation, further ensuring the institutionalization and standardization of energy conservation and emission reduction work.

To do a good job in energy conservation and emission reduction, we must effectively strengthen leadership. To this end, we have established leadership groups at all levels to clarify that the top leaders bear overall responsibilities and are in charge of specific work systems for leaders. We have formulated various rules and regulations and implemented them in a timely manner. Summarize and promote advanced experience, vigorously promote and commend advanced models, adhere to monthly meetings, report situations, and solve problems in a timely manner to ensure the healthy development of this work. Strengthen system construction, innovate working mechanisms and activity carriers, and ensure that this work continues to achieve solid results.

Although we have done some work, there is still a big gap between the requirements of our superiors and the expectations of the masses. We are determined to be innovative, truth-seeking and pragmatic under the leadership of our superiors and in accordance with the requirements of the Scientific Outlook on Development. Continuously create new prospects for energy conservation and emission reduction, and make new and greater contributions to curbing climate warming.

Thank you everyone! Summary of energy-saving work 5

This year, the school can thoroughly study and implement the scientific concept of development, improve the school's energy utilization efficiency, and promote the school's energy-saving work in accordance with the law. According to the requirements of the State Council, xx Province, and xx City on energy conservation and emission reduction , formulated an energy-saving work plan for xx No. 1 Experimental Primary School, and was able to carry out energy-saving and emission reduction work in a planned, focused and planned manner. In XX, our school's energy conservation and emission reduction work basically completed the task goals set at the beginning of the year and achieved relatively satisfactory results. The energy conservation and emission reduction work of our school and the work ideas for XX are now reported as follows.

1. Seriously study unified understanding and strengthen leadership division of labor

1. The school held a meeting of the leadership team, middle-level directors and the whole school staff to convey the spirit of the documents of the superior department and the work of the school Deployments and plans call on all teachers and students in the school to take active actions and participate in activities to save energy, reduce emissions and reduce consumption, and strive to be good teachers and students who save energy, reduce emissions and reduce consumption, and lay the foundation for completing various indicators of the school in xxxx Work hard towards the goal of going up and down 5.

2. The school established an energy-saving and emission-reduction leadership group personally led by the top leader, clarified their respective responsibilities, and formulated and issued an energy-saving and emission-reduction work plan for xxxx No. 1 Experimental Primary School in xxxx, forming a A good situation of joint efforts in *** management.

2. Strengthen management measures in place and ensure close cooperation with management

1. Comprehensive system construction

In order to better implement energy conservation and emission reduction work, To complete the annual work goals, according to the actual situation of the school, we formulated an energy conservation and emission reduction work plan, formulated a series of rules and regulations, and conscientiously implemented them at work to ensure that energy conservation and emission reduction work is implemented.

2. Clear division of responsibilities

Therefore, according to the specific situation of the school, a clear division of responsibilities has been made so that whoever is in charge is responsible, manages their own people, and does their own good. thing.

3. Strengthen implementation and focus on management

According to the energy conservation and emission reduction work plan formulated by the school, each department carries out work in a planned and step-by-step manner, and comprehensively adopts energy conservation and emission reduction measures. discharge measures.

(1) Carry out activities to build a civilized school spirit, so that energy conservation and emission reduction work can be subtly implemented in students' daily lives and penetrated into students' hearts. Each class in our school adheres to the environmental sanitation system of "three small sweeps a day and a general cleaning every week", which enables students to develop good hygiene habits of paying attention to hygiene and maintaining hygiene; it also regularly carries out civilized and polite month activities, "Stoop Action", " "Turn off the lights, water faucets, etc.", etc., while saving a piece of paper, a kilowatt hour of electricity, and a drop of water, inspired the enthusiasm of teachers and students to be thrifty, and enabled them to develop good civilized and hygienic habits. Good environmental ethical behavior; energy conservation, emission reduction, and environmental protection have become conscious actions of teachers and students.

(2) Strengthen publicity and education on energy conservation and emission reduction, and create a campus culture of energy conservation and emission reduction. We use class meetings, morning meetings, blackboard newspapers, radio and other methods to carry out energy-saving publicity activities among teachers and students. Electronic screens scroll and broadcast relevant energy-saving and emission-reduction slogans and slogans, creating a good energy-saving and emission-reduction campus. cultural atmosphere.

(3) Timely repair and maintenance. In order to truly implement energy conservation and emission reduction work, the school dismantled the gas boiler in the canteen and replaced it with solar hot water. It also replaced the white steel stove with environmental protection functions to save money. A lot of money. While ensuring the normal use and safety of education and teaching, energy-saving lamps were replaced in the classrooms, and switch-controlled fluorescent lamps were removed from the corridors and replaced with voice-activated lamps while ensuring safety. Problems were solved in a timely manner to eliminate leaks, leaks, and leaks. The phenomenon of keeping lights on and computers on has controlled the number of school vehicle trips, calling for buses to be used for errands, reducing fuel consumption and saving a lot of money.

(4) The results are good, and we continue to work hard. Through the joint efforts of teachers and students in the school, and with the help and support of superior leaders, the school’s water, electricity, gas, and The four fuel consumption reduction indicators have all dropped by 5% compared with 2016, completing the energy conservation and emission reduction goals set at the beginning of the year.

3. Shortcomings

1. Capital investment must continue to increase and old hardware must be replaced to meet the needs of modern development and energy conservation and emission reduction.

2. The school’s management system still needs to be refined and improved.

3. Inspection efforts should be strengthened to ensure the completion of targets.

IV. Focus of work in xx

1. Strengthen the proportional distribution of various energy consumption on a monthly and quarterly basis, and conduct strict assessments.

2. Strengthen the recycling and reuse of waste items.

3. Continue to promote the use of new energy-saving products and increase consumption reduction efforts.

In short, the results can only represent the past. Looking into the future, there is a long way to go. In XX, our school will continue to dig deep into the internal potential, open up channels, participate in all staff, work together, and go all out to complete the goals in XX. Energy conservation and emission reduction work goals.