Joke Collection Website - Bulletin headlines - What are the safety facilities and equipment included?

What are the safety facilities and equipment included?

Question 1: What safety facilities are there in safety equipment and facilities?

1. Meaning

Safety facilities refer to the ways in which enterprises (units) remove dangerous equipment during production and business activities. Control harmful factors within a safe range and the devices (equipment) and measures taken to prevent, reduce, and eliminate hazards.

2. Classification

Safety facilities are divided into three categories: accident prevention facilities, accident control facilities, and facilities to reduce and eliminate the impact of accidents.

(1) Accident prevention facilities

1. Detection and alarm facilities

(1) Alarm facilities for pressure, temperature, liquid level, flow rate, composition, etc. ;

(2) Detection and alarm facilities for flammable gases, toxic and harmful gases, etc.;

(3) Inspection, detection and alarm facilities for safety inspections and safety data analysis;

2. Equipment safety protection facilities

(1) Protective cover, protective screen, load limiter, stroke limiter, brake, speed limiter, lightning protection, moisture-proof, sun protection, and anti-freeze , anti-corrosion, anti-leakage and other facilities;

(2) Safety locking facilities for transmission equipment;

(3) Electrical overload protection facilities;

(4) Static grounding facilities;

3. Explosion-proof facilities

(1) Explosion-proof facilities for various electrical and instrumentation;

(2) Isolation of explosion-proof equipment and explosion-proof work Appliances;

4. Workplace protective facilities

Radiation protection, electric shock prevention, anti-static, noise prevention, ventilation (dust removal, detoxification), protective fence (net), Anti-slip, anti-burning and other facilities.

5. Safety warning signs

(1) Including various instructions, warning signs, warning signs, warning signs, warning signs, warning signs, warnings about operation safety, escape and refuge, and wind direction.

(2) Road traffic signs in the factory.

(2) Accident control facilities

1. Pressure relief and check-back facilities

(1) Valves, bursting discs, and vents used for pressure relief Pipes and other facilities;

(2) Valves and other facilities used for check-back.

2. Emergency treatment facilities

(1) Emergency backup power supply, emergency cut-off and other facilities;

(2) Emergency stop, instrument interlock and other facilities.

(3) Facilities to reduce and eliminate the impact of accidents

1. Facilities to prevent fire spread

(1) Fire arresters, fire escapes, explosion-proof walls, and explosion-proof doors and other explosion-proof facilities;

(2) Firewalls, fire doors and other facilities;

(3) Fireproof material coating.

2. Fire extinguishing facilities: fire extinguishers, fire hydrants, high-pressure water guns, fire trucks, fire pipe networks, fire stations, etc.

3. Emergency individual handling facilities: eye washers, sprinklers, emergency lighting and other facilities.

4. Escape facilities: escape safety passage (ladder).

5. Emergency rescue facilities: leak plugging, engineering rescue equipment and medical rescue equipment for injured people on site.

6. Labor protection equipment

Including fire protection, anti-virus, anti-scald, anti-corrosion, anti-noise, etc. for the head, face, vision, breathing, hearing organs, limbs, and body. Labor protection supplies and equipment that protect against light exposure, falling from heights, smashing, stabbing and other physical and chemical factors in the workplace.

Question 2: Safety equipment can generally be divided into the following categories:

1. Fire-fighting equipment, including fire extinguishers, water curtain walls, pipe network systems, pumps, pools, etc.

2. Emergency rescue equipment, including: medical first aid equipment, emergency lighting systems, personnel rescue equipment, etc.

3. Safety monitoring equipment, including: flammable gas detection systems, flame detection systems, etc.

4. Install safety equipment, including: interlocking shutdown system, pressure and other safety valves, liquid level and other control parameter monitoring and alarm systems, limiters of lifting equipment, etc.

5. Personal protective equipment, including: seat belts, respirators, protective clothing, etc.

Question 3: What are the common safety equipment? Safety facilities 1. Meaning Safety facilities refer to the production and operation of enterprises (units) The devices (equipment) and measures taken to control hazardous and harmful factors within a safe range during activities and to prevent, reduce, and eliminate hazards. 2. Classification Safety facilities are divided into three categories: accident prevention facilities, accident control facilities, and accident impact reduction and elimination facilities. (1) Accident prevention facilities 1. Detection and alarm facilities (1) Alarm facilities for pressure, temperature, liquid level, flow, composition, etc.; (2) Detection and alarm facilities for flammable gases, toxic and harmful gases, etc.; (3) For Inspection, detection and alarm facilities such as safety inspection and safety data analysis; 2. Equipment safety protection facilities (1) protective cover, protective screen, load limiter, stroke limiter, brake, speed limiter, lightning protection, moisture proof, sun protection, Anti-freeze, anti-corrosion, anti-leakage and other facilities; (2) Safety locking facilities for transmission equipment; (3) Electrical overload protection facilities; (4) Electrostatic grounding facilities; 3. Explosion-proof facilities (1) Explosion-proof facilities for various electrical and instrumentation; (2) Isolation of explosion-proof equipment and explosion-proof tools; 4. Workplace protective facilities: Radiation protection, electric shock prevention, anti-static, noise prevention, ventilation (dust removal, detoxification), protective fence (net), anti-slip, and anti-burning in the workplace and other facilities. 5. Safety warning signs (1) include various instructions, warning signs, warning signs, warning signs, and warning instructions to warn about work safety, escape and refuge, and wind direction. (2) Road traffic signs in the factory. (2) Accident control facilities 1. Pressure relief and check-back facilities (1) Valves, bursting discs, vent pipes and other facilities used for pressure relief; (2) Valves and other facilities used for check-back. 2. Emergency treatment facilities (1) Emergency backup power supply, emergency cut-off and other facilities; (2) Emergency parking, instrument interlocking and other facilities. (3) Facilities to reduce and eliminate the impact of accidents 1. Facilities to prevent the spread of fire (1) Fire arresters, fire escapes, explosion-proof walls, explosion-proof doors and other explosion-proof facilities; (2) Firewalls, fire doors and other facilities; (3) Fireproof material coating layer. 2. Fire-fighting facilities: fire extinguishers, fire hydrants, high-pressure water guns, fire trucks, fire pipe networks, fire stations, etc. 3. Emergency individual handling facilities: eye washers, sprinklers, emergency lighting and other facilities. 4. Escape facilities: escape safety passage (ladder). 5. Emergency rescue facilities: leakage plugging, engineering rescue equipment and medical rescue equipment for injured people on site. 6. Labor protection equipment includes head, face, vision, respiratory, hearing, limbs, and body fire protection, anti-virus, anti-scald, anti-corrosion, anti-noise, anti-light radiation, anti-falling from high places, anti-smash, anti- Labor protection supplies and equipment that protect against injuries caused by physical and chemical factors in the workplace, such as stab wounds.

Question 4: What are the contents of food safety equipment and facilities? The food safety facilities involved in the application materials for the "Catering Service License" include: disinfection cabinets, cleaning cabinets, refrigerators, freezers, ultraviolet disinfection lamps, Anti-fly lamps, secondary changing rooms, grease traps, wash basins, trash cans, sinks, air conditioners, etc.

Major Hazards in Food Production:

Hazard refers to potential negative health effects caused by biological, chemical, or physical agents or conditions. Examples of hazards in the food production process include metal shavings (physical), pesticides (chemical) and microbial contamination such as germs (biological). The main hazard faced by the food industry today is microbial contamination, such as Salmonella, Eco-157:H7, preservatives, Blastomyces, Junellae, Flesh bacteria, etc.

Question 5: What are the safety facilities and equipment on campus, such as fire extinguishers and evacuation lights?

Question 6: What are the safety facilities and facilities on campus? Safety facilities refer to the protection of people, vehicles, Sailing safety is a general term for facilities such as tunnels, overpasses, navigation marks, lighthouses, lighting equipment, waterproof facilities, guardrails, posts, signs, markings and other facilities set up along houses, roads, railways, ports and waterways.

Question 7: What are the safety facilities in the new Safety Production Law? 20 points The "Safety Production Law" stipulates that production and business units are the main body responsible for the construction of safety facilities in construction projects. The safety facilities of construction projects must be designed, constructed, put into production and used at the same time as the main project (hereinafter referred to as the "three simultaneities"). Investment in safety facilities should be included in the construction project budget.

Safety facilities vary from enterprise to enterprise. The safety facilities of construction projects stipulated in the "Interim Measures for the Supervision and Management of "Three Simultaneities" for Safety Facilities in Construction Projects" refer to the production and operation units used to prevent production and operation during production and operation activities. The general term for equipment, facilities, devices, structures and other technical measures for safety accidents.

Regarding the specific facilities that an enterprise needs, local safety supervision bureaus have safety evaluation agencies. They will design the safety of the enterprise. The safety supervision bureau will also review the design of safety facilities and accept the safety facilities. .

Question 8: What are the safety protection equipment included in the 30-minute safe and civilized construction measures fee?

1. Safety production

1. Preparation of safety information, The purchase of safety warning signs and the setting up of publicity boards;

2. The cost of "Three Treasures", "Four Ports" and "Five Borders" protection;

3. Construction safety The cost of electricity, including standardization of electrical boxes, electrical protection devices, and external electrical protection measures;

4. Safety protection measures (including warnings) for cranes, tower cranes and other lifting equipment (including derricks and gantry) and external elevators (mark) fees and fees for edge protection of the unloading platform, inter-layer safety doors, protective sheds and other facilities;

5. Inspection and testing fees for hoisting machinery at construction sites;

6. The cost of safety protection facilities for construction machinery protective sheds and their fences;

7. The cost of safety protection passages at the construction site;

8. The cost of purchasing protective equipment and equipment for workers;

9. The cost of configuration of fire-fighting facilities and fire-fighting equipment;

10. The cost of electrical protection and safety lighting facilities;

11. The cost of other safety protection measures.

2. Civilized construction

1. The cost of the gate, five cards and one picture, worker badges, and corporate logo;

2. Beautification of the enclosure wall (Including interior and exterior painting, whitewashing, slogans, etc.), roof decoration costs; on-site toilet bowl whitewashing, tile tiles, cement mortar floor or floor tiles, temporary toilet facilities in the building; other decoration and beautification measures for temporary facilities on the construction site Expenses;

3. On-site sanitary facilities costs; drinking water equipment, showers, disinfection and other facilities that meet sanitary requirements; clean fuel costs for daily use; costs of measures to prevent gas poisoning, mosquito bites, etc.;

4. The cost of hardening the construction site operation site;

5. The cost of controlling on-site pollution sources, cleaning and transporting construction waste and domestic waste, and site drainage and sewage measures; dust prevention and watering in municipal projects Expenses;

6. On-site greening costs, comprehensive public security management costs, on-site electronic monitoring equipment costs;

7. On-site medical and health care equipment, supplies and first aid personnel training costs;

8. Costs for heatstroke prevention and cooling, electric fans, air conditioners and other equipment and electricity costs for on-site workers;

9. Costs for on-site construction machinery and equipment to prevent noise and prevent disturbance to residents;

10. Other civilized construction measures costs.

----------------------------------------------- -------------------------------------

Safe and civilized construction

During project construction, in order to ensure that the project can be carried out safely and smoothly, every employee should be motivated to work as much as possible, ensure the safety of every production personnel, and achieve the goal of "Come to work happily and go home safely. "To go", the safety management of the construction site must be strengthened. The project department and each construction operation department work together to create a good, safe and civilized working environment.

1. The project management department shall formulate relevant safety and civilized production regulations in strict accordance with the requirements of the Nanjing Construction Safety Production Supervision Station, and implement necessary safety facilities, protection and various signs, etc., to ensure that city standards are met In order to ensure that every person entering the site has a sufficient sense of security and devotes himself to production and construction.

2. The project department has established a safety leadership group with the executive manager as the team leader, the person in charge of each operation department as the deputy team leader, and the safety officer as the team member, responsible for the command, supervision, and execution of daily safety production. We insist on arrangements, inspections, records, and results every day. We make evaluations every Monday and summarize every month. We must correct any mistakes without slacking off. When there are people working on the construction site, we will have safety officers on site to ensure Discover hidden dangers in a timely manner and deal with them in a timely manner to nip them in the bud without causing any safety accidents, big or small.

3. All personnel who enter the site for construction must receive education on entry safety instructions. Especially for those construction personnel with weak safety awareness and low educational level, they must be educated patiently and carefully. Make sure that they can understand and do it, instead of just saying it in a formal way. The project department will organize them to study in various forms according to the characteristics of the on-site unit price project, ask questions about safety production knowledge, and even conduct exams, so as to carry out targeted safety and civilized production work.

4. Safety management personnel who enter the construction site must be trained and hold a certificate to work. They should have a strong sense of responsibility, be able to endure hardships and stand hard work, and be quick-sighted (can find problems) and diligent (more Inspecting on-site), being diligent (talking up problems when they are found), and doing their job conscientiously. Special types of construction workers entering the construction site (electricians, tower crane drivers, welders, erecting workers, mechanics, etc.) must go through the relevant departments...gt;gt;

Question 9: What are the safety equipment and facilities of an enterprise?

1. Meaning

Safety facilities refer to the way an enterprise (unit) controls dangerous and harmful factors within a safe range in production and operation activities. As well as the devices (equipment) and measures taken to prevent, reduce and eliminate hazards.

2. Classification

Safety facilities are divided into three categories: accident prevention facilities, accident control facilities, and facilities to reduce and eliminate the impact of accidents.

(1) Accident prevention facilities

1. Detection and alarm facilities

(1) Alarm facilities for pressure, temperature, liquid level, flow rate, composition, etc. ;

(2) Detection and alarm facilities for flammable gases, toxic and harmful gases, etc.;

(3) Inspection, detection and alarm facilities for safety inspections and safety data analysis;

2. Equipment safety protection facilities

(2) Safety locking facilities for transmission equipment;

(3) Electrical overload protection facilities;

(4) Static grounding facilities;

3. Explosion-proof facilities

(1) Explosion-proof facilities for various electrical and instrumentation;

(2) Isolation of explosion-proof equipment and explosion-proof work Appliances;

4. Workplace protective facilities

Radiation protection, electric shock prevention, anti-static, noise prevention, ventilation (dust removal, detoxification), protective fence (net), Anti-slip, anti-burning and other facilities.

5. Safety warning signs

(1) Including various instructions, warning signs, warning signs, warning signs, warning instructions, etc. about operation safety, escape and refuge, and wind direction.

(2) Road traffic signs in the factory.

(2) Accident control facilities

1. Pressure relief and check-back facilities

(1) Valves, bursting discs, and vents used for pressure relief Pipes and other facilities;

(2) Valves and other facilities used for check-back.

2. Emergency treatment facilities

(1) Emergency backup power supply, emergency cut-off and other facilities;

(2) Emergency stop, instrument interlock and other facilities.

(3) Facilities to reduce and eliminate the impact of accidents

1. Facilities to prevent fire spread

(1) Fire arresters, fire escapes, explosion-proof walls, and explosion-proof doors and other explosion-proof facilities;

(2) Firewalls, fire doors and other facilities;

(3) Fireproof material coating.

2. Fire extinguishing facilities: fire extinguishers, fire hydrants, high-pressure water guns, fire trucks, fire pipe networks, fire stations, etc.

3. Emergency emergency disposal facilities: eye washers, sprinklers, emergency lighting and other facilities.

4. Escape facilities: escape safety passage (ladder).

5. Emergency rescue facilities: leak plugging, engineering rescue equipment and medical rescue equipment for injured people on site.

6. Labor protection equipment

Question 10: What are the safety facilities? Safety facilities refer to the devices equipped by enterprises (units) to control dangerous and harmful factors within a safe range and reduce, prevent and eliminate hazards in production and operation activities. (equipment) and measures taken.

Classification of safety facilities

⒈Accident prevention facilities

⒉Accident control facilities

⒊Reduction and elimination of accident impact facilities