The choice of drainer for toilet sink is promising.

Buying sanitary ware is very special. Especially in the hidden area of the bathroom sink, if you buy the ideal, refreshing bathroom is no longer a problem!

According to the materials, there are two kinds of washbasins in the bathroom.

1, plastic water purifier: this kind of water purifier is usually made of high-quality PP plastic, which can be bent at will, has good toughness, is almost free from space restrictions and is low in price.

2. Stainless steel water purifier: the surface is made of stainless steel. Most of these water purifiers are made of stainless steel and ABS engineering plastics, which have strong corrosion resistance, are not easy to age, are convenient to install, are quick and durable, have long service life and are lower than plastic pots. The equipment is a little more expensive.

The structure of the toilet washbasin drainer The washbasin water dispenser was originally a lifting type, and there are flip-flops and bouncing types on the market.

What kind of water purifier to choose depends on whether the washbasin has an overflow and whether there is a water purifier with an opening. If there is no choice, please choose a drainer without an opening.

The bounce looks very good, but after a while, you need to unscrew the water and scrub the dirt with detergent to ensure the smooth flow of water.

This type of water collector has disadvantages and is usually suitable for glass basins, not ceramic basins. Because the pipeline under the water purifier needs to overflow, some suppliers will punch holes in the glass water purifier when selling water purifiers with ceramic pots. The water inlet of this improved water purifier is much shorter. If the ceramic basin is thick and cannot be fastened, it can only be tightened with hexagon bolts, but it is very unstable and easy to loosen after installation, so it is best not to choose this water device.

Tips for the installation of the drain on the washstand in the bathroom The installation of the drain on the washstand in the bathroom is usually carried out after the basin is installed and fixed. The specific steps are as follows:

1, ensure that the basin is installed;

2. Open the packaging of the sink drainer;

3. One end of the basin water purifier is specially connected with the basin water purifier, and the plastic head of the head is screwed in;

4. Screw the tightened plastic head onto the sink drainer;

5. Place the basin-type water purifier on the basin-type water purifier and tighten it with the plastic head screwed on the water purifier in advance;

6. Water leakage test. If there is water leakage, you can wrap the raw material belt around the joint between the water purifier and the water heater, and then go to step 5.

7. There is also a copper nut, followed by a rubber ring screwed on the bottom of the washbasin, and then the porcelain plate is placed on the sink, that is, an apron and nut are sandwiched between the porcelain basin and the sink.

8. Screw the nut to the bottom of the sink panel, that is, the apron is sandwiched between the porcelain basin and the panel, and the nut is located at the bottom of the sink panel.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~