How to use hydrochloric acid correctly to clean the floor?

Pour a small amount of acetic acid on the towel and wipe the floor with the towel. Never pour directly on the floor, pouring a lot of acetic acid on the towel will corrode the floor for one second.

Several treatment methods of common leakage pollution are as follows. 1. Use sodium hypochlorite thinner (bleach) to treat tea stains, fruit stains, coffee sauce vinegar stains, leather shoes prints and other stains. Soak for 20-30 minutes and then wipe with a cloth; Some stains that have penetrated into bricks for a long time will take several hours to soak. 2. Please use sodium hypochlorite thinner (bleach) for mildew spots formed by mildew of ink and antifouling wax. When in use, just apply bleach to the stain and soak it for a few minutes to wipe it off. 3. Cement, scale, rust and rust spots should be wiped several times with hydrochloric acid or phosphoric acid solution. 4. Use alkaline cleaner or organic solvent (acetone, triethylene) to remove paint, oil stain marks and surface antifouling wax layer, and remove paint and grease remover. 5. Usage of rubber hammer printing for decontamination: soak it in 20%-40% sodium hydroxide solution for 24 hours and then wipe it with a cloth, then soak it in 30%-50% hydrochloric acid solution for 30 minutes and then wipe it with a cloth. 6. Ice cream alkaline cleaner 7. Note of lime scale acidic cleaner: 1. Wear rubber gloves when using the detergent; 2. Remove stains, and then scrub the brick surface with clean water; There is the latest decontamination cleaner in the market or supermarket. Please refer to the above decontamination scope and methods.