How to mark the workshop area with lines?

Division and identification of workshop area: the line width is 60mm, which is used for placing articles; Line width 80mm, used for equipment area line; Line width 120mm, used for main channel lines. Depending on the region, different colors can be used. Generally, zebra crossings are not used in workshops, and red and yellow colors are used in workshops.

Grade d-yellow and black twill zebra crossing (inclined 45? Dangerous goods area line, warning area line and fire escape line; Positioning line, Class A-Equipment positioning: all equipment and workbench are positioned with yellow four-corner positioning line, and the blank part of the four-corner positioning line of workbench is marked with the words "XX workbench/equipment".

Class B-Defective areas (waste recycling bins, boxes and defective product shelves) are marked with red lines. If the positioning range is less than 40cm×40cm, the closed solid wireframe is directly used for positioning.

Extended data

The layout of the workshop should be determined according to the production outline and division of labor table, production technology, process route, production organization form, types, models and quantities of machinery and equipment and lifting and transportation equipment. A good workshop layout should shorten the transportation distance as far as possible, so that the materials will flow through each station in turn after entering the workshop and then flow out of the workshop.

Baidu Encyclopedia-Workshop Layout

Phoenix Net-Workshop Marking and Marking Management Requirements+Location Management Legend