I bought a pair of Li Ning's shoes the other day, which said that they could not be washed. How should I wash them?

Wipe with a wet towel. If you encounter stubborn stains, you can wipe them off with some toothpaste. If the main fabric is mesh, it can be washed without washing. If it is too dirty, there is no problem in water, but the washed cloth will be harder than before.

In order to make sports shoes look more beautiful, please don't use a hard brush or excessive force when wearing or brushing sports shoes, and don't dig the corners of these printed patterns with nails or sharp tools. After wearing for a period of time, some small cracks may appear on the surface of some patterns (especially in the often tortuous parts), which is normal.

Extended data:

Precautions for daily cleaning

1, When your shoes are dirty, you can gently scrub them with clean water dipped in detergent, then rinse them with clean water and dry them in a cool and ventilated place to avoid direct sunlight. Do not use heat or open flame to dry, so as not to cause aging, glue opening, fading and serious deformation.

Too much direct sunlight, hot air from hair dryer and improper nursing methods will reduce the service life of shoes; When washing, you can't soak for a long time. Generally, the soaking time should not exceed 20 minutes. Real leather shoes should not be soaked in water.

2. The raw materials of sports shoes are mostly synthetic polymer materials (mostly polyester nylon mesh cloth and non-woven artificial leather, and the soles are mostly rubber or rubber foam materials). Some uppers are genuine leather, so it is forbidden to contact with organic reagents and grease solutions, and it is not suitable for wearing in high temperature environment for a long time. Generally speaking, the temperature of wearing or washing should not be higher than 45 degrees Celsius.

3. If the shoes are stored for a long time, they should be cleaned first, and then stored in a cool and ventilated place after drying, so that the shoes have enough time to dry and avoid mildew.

It is best to hold up real leather shoes with paper balls or shoe braces to avoid serious deformation. Put the shoe head down, the sole faces the wall, and dry it in a ventilated place at room temperature, so as to prevent water from infiltrating into the foam material of the midsole. (Because foaming materials are not easy to dry, it is recommended not to put wet shoes flat. )