Emergency plan for heatstroke prevention and cooling in aerial work

Emergency plan for heatstroke prevention and cooling in aerial work

In the study, work and life on weekdays, emergencies are not allowed. In order to avoid more serious consequences, an excellent emergency plan is often prepared in advance. What problems should be paid attention to in the preparation of emergency plan? The following is my emergency plan for heatstroke prevention and cooling in aerial work. Welcome to reading. I hope you will like it.

Emergency plan for heatstroke prevention and cooling in aerial work 1 This plan is formulated according to the characteristics of this project in order to ensure the smooth construction of this project, to ensure that emergency rescue work can be rapid and effective in case of emergency during the construction process, and to ensure the life and property safety of enterprise employees to the maximum extent.

First, this plan is formulated for various emergency situations in construction to ensure that all kinds of emergency resources are in a good state of preparation; Moreover, it can guide emergency actions to be carried out in an orderly manner as planned, prevent accidents from being delayed due to ineffective actions or chaotic on-site rescue work, and thus reduce casualties and property losses. Construction emergencies refer to all kinds of engineering construction accidents that occur suddenly and cause or may cause more casualties and greater economic losses.

Two, the establishment of building emergency leading group, responsible for the command and coordination of emergency rescue work. The project manager is responsible for the implementation by the commander-in-chief of the leading group. If the chief commander is out, the project executive manager will act as the deputy chief commander. In the absence of the Deputy Chief Commander, it shall be implemented by the on-site technical director. The implementation of rescue work, the specific personnel arrangements can be found in the emergency plan organization.

Three, when all kinds of high temperature emergency symptoms appear in the engineering construction, after receiving the emergency report, should immediately start the plan. At the first time, ask for help from the information liaison group of the project department and the "120" ambulance center respectively, and report the situation to the leaders of the project department. After an emergency, the follow-up situation should be continuously fed back to relevant leaders and departments.

Four. After an emergency occurs during the construction, the project department will set up a rescue site headquarters as appropriate, with the project manager as the chief commander of the accident site, and set up the following leading groups: emergency rescue leading group and member emergency chief commander:

Team Name: Emergency Leading Group for Emergency Situations

Team leader: Li Xiaojun

Members: Liu Zhibo, Zhang Qingji, Xu Diancheng, Wang Shujun, Liu Liming, Zhang Guohua and Zhou Changxin.

Heatstroke prevention and cooling protection group: Zhang Qingji, Guo Zhenshan, Zhang Guohua, Qu Yuntao, Li Baoqing and Wang Chunjie.

Information Contact Group: Zhang Guohua, Zheng Jun and Yang Dongxu.

Security Group:, Zhang Guohua, Dong Benyun,, Huo.

On-site medical rescue teams: Qu Yuntao, Wang Chunjie, Dong Benyun, Huo.

Logistics Support Team: Guo Zhenshan, Zhang Guohua, Yan, Wang, Wen.

1, heatstroke prevention and cooling protection team

In the summer construction process, there are many open-air working environments during operation; The distribution area of personnel work is complex and changeable; The influence of high labor intensity has brought a lot of inconvenience to the summer construction of the project. In order to protect the legitimate rights and interests of workers and the safety of life and property, and create a safe and comfortable environment for workers, the team leader will immediately organize members of this group to transfer and control the accident personnel when the workers have adverse reactions due to high temperature, so as to prevent the increase of accident personnel in the surrounding construction site. Make emergency actions more targeted and improve operational efficiency. So as not to cause huge accident losses.

2. Information Contact Group

Be responsible for understanding the scope of casualties, economic losses and emergencies, organizing the collection of weather and temperature conditions, then taking necessary preventive measures, reporting measures and developments to superiors in time and contacting relevant departments.

3, security (alert) team

The safety officer will be the team leader and organize the team members to monitor the development of dangerous situations to prevent the construction period from being affected, and strengthen the safety education for the team members to further improve the safety awareness, and organize on-site management personnel to conduct safety inspections on the construction site to eliminate potential safety hazards, so as to prevent the occurrence of vicious accidents and how to control the impact of accidents to a minimum.

4. On-site medical rescue team

When an accident occurs, the flight attendant should organize employees to classify and treat heatstroke employees on the spot, and be responsible for the effective rescue of sick people at the first time; And transfer in time. The main duties of ambulance personnel are: to enter the construction site to rescue the wounded; Guide heatstroke personnel to carry out self-help and mutual rescue activities; Concentrate, count, transport and treat the wounded. According to the specific situation, quickly formulate emergency response plans and organize their implementation.

5. Logistics Support Team

Responsible for organizing the mobilization of rescue personnel, materials and equipment, and supervising and inspecting the implementation of various emergency rescue and disaster relief measures.

Five, in the event of an emergency in the construction, the rescue site command according to the specific situation, can assemble rescue teams, personnel, materials and equipment from the nearby construction site. At the same time, professional rescue teams, materials and equipment are mobilized from emergency preparedness and rescue teams.

Six, all kinds of emergencies, the need to mobilize the main professional rescue team, emergency relief supplies. The main materials and personnel responsibilities are arranged as follows:

1, preparation of personnel and materials:

The material engineer is responsible for the material procurement of the project department. The main drugs and medical rescue equipment are as follows:

(1), drugs: cold medicine, antidiarrheal medicine and other therapeutic drugs, Huoxiang Zhengqi water, Huoxiang Zhengqi soft capsule, essential oil, tea, sugar and so on.

(2) Rescue appliances: single frame, ambulance, oxygen bag, towel, medical medicine cabinet, freezer (ice), etc.

Seven, rescue methods:

1, mild patient

When on-site operators feel dizzy, weak and dizzy, they should immediately stop their operations to prevent secondary accidents. Other peripheral operators should arrange symptomatic personnel to rest in a cool and ventilated area and provide them with cold water and wet towels. And notify the project department medical rescue personnel for observation, diagnosis and treatment.

2. Severe patients (syncope, shock, severe water shortage, etc. )

When heatstroke occurs on the job site, people around the job should immediately notify the project department, and timely transfer the accident personnel to a cool and ventilated area to observe their symptoms, so that medical personnel can temporarily grasp the first-hand medical information. The project department should decide whether to start the heatstroke prevention and cooling plan according to the specific situation. And immediately organize ambulance personnel to go to the scene to treat the accident personnel. Those with severe symptoms should be transferred to the nearest hospital for observation and treatment as soon as possible in the case that the medical equipment of the project department cannot be treated. And report to the owner.

Eight, the aftermath:

1, according to the principle of "four pass", do a good job in the investigation and handling of accidents, take targeted preventive measures, and strengthen publicity and education for each team, so that everyone can master the precautions in the summer construction process and know how to protect themselves; Know how to save others. Summarize the experience and lessons to prevent similar incidents from happening. Specific preventive measures are as follows:

(1) The information team collects and processes the daily weather conditions, and then reports them to the heatstroke prevention and cooling support team of the project department, and takes corresponding safety precautions according to the specific situation.

(2) When the outdoor temperature is higher than 39℃, the project department shall conduct special safety disclosure for cooling construction for each team to stop the on-site construction.

(3) The logistics support team should be able to guarantee the workers' drinking water and emergency medicines at any time.

(4) The heatstroke prevention and cooling emergency rescue agency shall formulate a set of reasonable and effective "personnel work and rest schedule" according to the temperature situation of the year, and avoid the highest daily temperature period (11:00 ~15: 00) for construction.

(5) The Project Department shall conduct safety education for each team to improve the workers' ability to cope with various situations. Strengthen the propaganda work of construction safety in summer, so that everyone can understand and master the safety common sense of heatstroke prevention and cooling, and improve the adaptability and processing ability of operators in practice.

(6) The project department shall set up medical personnel, strengthen the propaganda of medical rescue within the project, ensure the life safety of personnel, and create a humanized construction site.

Nine, emergency recovery, re-entry

After emergency recovery, the dangerous area must be evaluated and the accident analyzed before re-entry. Only when the dangerous area is determined to be safe can we enter the site to continue our work.

Emergency plan for heatstroke prevention and cooling for aerial work 2 In order to implement the spirit of the notice of the Education Bureau on heatstroke prevention and cooling, and ensure the health of teachers and students in our school and the orderly teaching work in our school, the following emergency plan for heatstroke prevention and cooling is formulated in line with the idea of "prevention is more important than Mount Tai" and combined with the reality of our school.

One. Organization:

1, the school set up a leading group for heatstroke prevention and cooling with the principal as the leader.

2. Seriously organize the study of heatstroke prevention and cooling-down related documents, report the situation in time, and ensure that the ideas, organizations and measures are in place.

Second, the responsibilities of various departments:

(1) Political and Educational Affairs Office and Academic Affairs Office

(1) Make arrangements for "on duty" during high temperature.

(2) If it is necessary to suspend classes temporarily in hot weather, you should inform the class teacher as soon as possible.

(3) Arrange students' activities when classes are suspended due to power failure in hot weather.

(4) Do a good job in the education of heatstroke prevention and cooling, safety and other knowledge during high temperature.

② General Affairs Office

(1) Before the high temperature comes, organize personnel to inspect all cooling facilities in the school, and report for repair in time if there is any damage, so as to ensure the normal use in high temperature season, and inform all departments of the situation in time.

(2) Do a good job in heatstroke prevention and cooling (buy necessary items for heatstroke prevention and cooling, such as mung beans).

(3) Ensure the necessary items such as electricity, water (drinking water) and ice cubes for heatstroke prevention and cooling in schools.

③ Class teacher

(1) Each class teacher should manage the drinking water of his class to ensure the quality of students' drinking water.

(2) Sprinkle water on the class floor in time. Students should prepare a clean towel and soak it in the head or neck with water when necessary.

(3) Students' physical reactions must be observed frequently in hot weather.

Third, other work:

Heatstroke prevention and cooling is a comprehensive work, and all departments of the school should cooperate with each other, support each other and be on call. All departments should try their best to do their own jobs, combine heatstroke prevention and cooling work with the actual situation of this post, check the scope of work, and be at the disposal of the school's heatstroke prevention and cooling leading group at any time. Qi Xin will work together to do a good job in heatstroke prevention and cooling this year.

Fourth, specific measures:

First, do a good job in heatstroke prevention and cooling publicity. Use campus radio, theme class meeting and other publicity forms to publicize the common sense of heatstroke prevention and cooling to students, and educate students to actively cope with high temperature weather. Actively guide teachers and students to maintain a peaceful mind, unity and harmony, and stable study and work in high temperature weather.

The second is to strengthen food safety management. Schools should strengthen the sanitary inspection of canteens, disinfect them and open doors and windows to ensure ventilation. Ensure the hygiene of students' drinking water and prevent infection of gastrointestinal diseases.

The third is to reduce students' outdoor sports. Cancel the strenuous activities such as recess exercises and physical education class, so as to avoid students' exposure and strenuous exercise outdoors for a long time.

The fourth is to ensure that students have a full rest. Strengthen the duty on duty, maintain a safe and stable rest environment, and ensure the mental state of students.

Emergency plan for heatstroke prevention and cooling in aerial work 3 This plan is specially formulated to protect employees' occupational health and prevent heatstroke from affecting their health.

I. List of personnel of emergency leading group

Group length: xxxx

Deputy team leader:

Members:

Second, the emergency leading group office:

The emergency office is located in the project department office.

Third, the beginning and termination of the plan.

When the outdoor temperature is higher than 37℃ in summer, the emergency team leader xxx announces the emergency plan. When the outdoor temperature is lower than 37℃ at the end of continuous 15 days, the leader of the emergency team will announce the termination of the heatstroke prevention and cooling plan.

Fourth, there are symptoms of heatstroke.

When there are symptoms such as headache, dizziness, vomiting and nausea in hot summer, it can be judged as heatstroke.

Verb (abbreviation of verb) emergency measures:

1, the emergency team leader announced the start of the emergency plan for heatstroke prevention and cooling, and xxxx was responsible for formulating the new construction operation time, which must avoid the high temperature period at noon.

2.xxx and xxxx are responsible for purchasing and installing cooling equipment such as fans for staff quarters.

3, xxxx, xxx do a good job in summer heatstroke knowledge propaganda, and teach employees various measures to prevent heatstroke in the form of "Letter to Employees" and blackboard newspaper.

4.xxx is responsible for distributing heatstroke prevention drugs to front-line employees, such as Ren Dan, chrysanthemum tea and essential oil.

5, by xxx, xxx supervision of the project department and each team canteen, requirements for employees to make mung bean soup and other heatstroke prevention food every day, the site has the equipment to supply boiling water.

6. When employees suffer from heatstroke, they shall immediately report to the emergency team, and the team leader shall organize some, all and other personnel of the emergency team for emergency treatment according to the heatstroke.

7. Other members of the team are mobile, so do a good job of cooperation.

Emergency plan for heatstroke prevention and cooling in aerial work 4 1. Purpose:

This plan is formulated in order to prevent employees from suffering from heatstroke when working in a high-temperature climate environment, to ensure the smooth production of the company, to ensure that employees can quickly and effectively carry out emergency rescue work in case of heatstroke and other emergencies, and to ensure the health and life safety of employees to the greatest extent.

2, responsibilities and scope of application:

The safety management committee of the company is responsible for the implementation of the plan. This plan is applicable to all departments of the company, and the key prevention units are: setting process, composite process, inspection section, warehouse, boiler room, equipment power department, canteen, etc.

3, emergency plan to start:

Based on the highest temperature of the day published by Changjiang Daily, when the highest temperature is above 37℃ for three consecutive days or reaches 38℃ on that day, the emergency plan will be automatically started, and all departments of the company will implement various work measures according to the emergency plan.

4, emergency plan implementation

(1) Equipment Power Department should strengthen the management of water and electricity supply in summer to ensure the production of electricity and water in the workshop.

Need. In case of power failure or water cut-off under special circumstances, the relevant departments should be informed in advance, and corresponding preventive plans should be formulated according to the specific circumstances.

(2) Widely publicize the knowledge of heatstroke prevention and control, so that employees can master the basic knowledge of heatstroke prevention and cooling; Workshop pipeline

Management cadres should strengthen the daily patrol inspection of workshop production, keep abreast of the high temperature environment in the workshop and the physical condition of employees, handle problems in time when they are found, and nip the signs of accidents in the bud.

(3) The Equipment Power Department is responsible for purchasing a batch of cooling drugs in advance and distributing them to each working procedure and post as required. The company has set up herbal tea barrels in every drinking place to ensure the daily supply of herbal tea.

(4) Each key working procedure and key high-temperature post in the workshop should be equipped with cooling fans. Arrange employees to rest in a cool and ventilated place for 20 minutes every morning 10: 30 and 2: 30 pm.

(5) The company canteen supplies ice water to the workshop production line twice a day for 65438+ 00: 30am and 2pm. Provide employees with two barrels of laver and egg soup for free at noon every day. The company office is responsible for the implementation.

(6) The company's motorcade shall ensure that there is a car at any time and a good driver to meet the needs of emergency handling. The company office is responsible for the details.

(7) heatstroke rescue methods:

Mild patients: When employees feel dizzy, tired and dizzy during normal operation, they should stop the operation immediately to prevent secondary accidents. Other employees around should arrange people with symptoms to rest in a cool and ventilated place and provide them with cold water, medicine and wet towels. And notify the workshop or department leader.

Severe patients: (syncope, shock, severe water shortage, etc. ) When employees of the company suffer from heatstroke, people around the operation should immediately notify the workshop or department leaders, and move the accident personnel to a cool and ventilated area in time to observe their symptoms, so that medical personnel can get first-hand medical information when they arrive. The company office immediately organized rescuers to transport heatstroke patients to the nearest hospital for observation and treatment, and reported them to the company.

;