As shown in the picture, how to drive safely when driving through ice and snow sections?

As shown in the figure, how to drive safely when driving through ice and snow sections is as follows:

1. Reduce the wheel pressure appropriately to increase the adhesion.

2. Defrost and defog in time, keep a good driving sight, and pay attention to the driving situation of the front, rear, left and right vehicles.

3. Don't refuel or refuel slowly when starting to prevent the vehicle from idling and slipping.

4. Take more straight lines and don't change lanes frequently.

5. Lightly step on the brake to slow down and downshift in the middle of the turn to avoid brake sideslip.

6. When going downhill, control the speed, keep a constant speed by lightly stepping on the accelerator, and don't step on the accelerator to accelerate sharply.

Generally speaking, the speed of urban roads on icy roads should be controlled at 10 km per hour, and ordinary roads in suburbs should not exceed 15 km per hour, depending on the road and traffic environment.

To keep a large safe distance, specifically, how high the driving speed is, how long the safe driving distance is. For example, at a speed of 30 kilometers per hour, you need to keep a distance of 30 meters. Because it takes 0.03 seconds for the driver to press the brake pedal at the earliest, the mechanical reaction time also needs 8.33 meters.

When driving in snowy days, we should not only ensure our own safety, but also give full consideration to others, especially cyclists and pedestrians. They may suddenly fall down accidentally because of the slippery road, and often slip far away because of the effect of ice and snow. Therefore, when driving through intersections and crosswalks, you should keep a safe distance from pedestrians and non-motor vehicles, and don't fight for the road.

When driving on ice and snow roads, you should concentrate on keeping a safe distance, drive smoothly at low speed, and don't merge or overtake at will. When braking, take a little braking or downshift to slow down. When turning, slow down and increase the turning radius. In case of emergency, slow down in advance. Don't slam the direction or brake.

The friction coefficient of ice and snow pavement is low, which reduces the braking efficiency of vehicles and causes side slip. When driving on a steep and slippery road. It is necessary to strictly control the speed and the vehicle will slide sideways. Never turn sharply or brake suddenly.

When driving in snowy days, we should not only ensure our own safety, but also give full consideration to others, especially cyclists and pedestrians. They may suddenly fall down accidentally because of the slippery road, and often slip far away because of the effect of ice and snow. Therefore, when driving through intersections and crosswalks, you should keep a safe distance from pedestrians and non-motor vehicles, and don't fight for the road.

According to the relevant laws of mechanics, the vehicle will continue to travel forward for a certain distance during the period from motion to complete standstill. If the car is too close to the front car, it is easy to collide with the front car, causing rear-end collision.

In order to ensure that the rear car will not rear-end with the front car under any extreme circumstances, the rear car needs to keep a certain distance from the front car at all times in order to leave enough braking space (including braking time and braking distance, etc.). ) in case of emergency.