Pharmacy specialty internship summary

Pharmacy major internship is an important link for pharmacy undergraduate students to complete the training goals stipulated in the education plan. It is not only an extension and expansion of classroom teaching content, but also a link to students' employment and an important bridge out of school and into society. Below I have compiled a summary of the pharmacy internship for everyone, welcome to refer to it.

Summary of Pharmacy College Internship Part 1

Before the internship, I heard from my classmates in the Department of Chemistry that my previous internships were very leisurely, where I read newspapers and books, and then came back. I went to the Traditional Chinese Medicine Department of the Drug Control Institute. Will my internship be busy? I put the question in my mind, got on the school bus under the scorching sun, and rushed to the internship location - __M City Drug Control Institute.

This internship lasts for 20 days. After a short break in the conference hall, the five of us went to the Traditional Chinese Medicine Department on the sixth floor of the Drug Testing Institute and started our internship. Working for the first time, we were both nervous and happy. The director of the Department of Traditional Chinese Medicine first introduced us to the basic situation of the Department of Traditional Chinese Medicine, and then assigned a tutor to each of us. We did experiments with Teacher Luo.

Experimental Life

Everything is difficult at the beginning. Teacher Luo had already finished the samples, so I only had to read the Pharmacopoeia and the atlas. Teacher Luo enthusiastically found two books for me: "Practical Identification Atlas of Traditional Chinese Medicine Pieces" and "Colorful Atlas of Traditional Chinese Medicine" for me to read, so that I could learn more about Chinese medicinal materials. But when I looked at it, I found that they were all doing experiments, and I was left reading a book. I followed other students and watched their experiments, which was considered a demonstration experiment. I also read the legendary "Pharmacopoeia". What I couldn't understand was that it had analysis methods for almost all drugs, and it also included specifications for various experimental methods! Reading like this is quite painful, everyone is If I have something to do, I'm the only one reading. Fortunately, it didn't take long for me to encounter it. Teacher Luo got the medicine to do thin layer chromatography. So another intern and I weighed, prepared solutions, refluxed, extracted... The air conditioner in the laboratory was broken, but we didn't care at all and helped the teacher prepare the test solution and the control medicinal solution. The teacher did a thin layer analysis and the results were good. I felt a small sense of accomplishment. As more and more experiments were done, the teacher also asked me to do a complete experiment by myself: thin layer chromatography analysis of Polygonatum japonica. I carefully followed the steps given by the teacher step by step and prepared the test solution and the reference medicinal solution. Unfortunately, during the thin layer analysis, the temperature was too high, the solvent was too volatile, and the thermal motion was too severe. The final result was Too bad some of the spots were covered up by the solvent.

We are also studying chemistry. After completing the experiment happily, we naturally felt good, but the bottle also wanted to take a refreshing bath~ So we started to wash the bottle. I heard that the senior students from the previous class grabbed more than 20 bottles and washed them with one hand. Looking at my bottles, they were too big. Breaking the record was so out of reach. The scenery outside the window is quite good. The mountains seem to be covered with a green blanket with patterns. I finished washing them before I knew it. When I counted them, I found that there were about 40 of them, which was incredible to me.

Usually, the teacher starts the morning by checking the literature (usually the Pharmacopoeia) to find the steps of the experiment and determine the experimental plan. Since we do a lot of thin-layer experiments, we usually carry out steps such as heating reflux, filtration and extraction in the morning, and prepare some solutions to be used during the free period in between. After adjusting during the lunch break, we went to the thin layer room in the afternoon to spot samples, do thin chromatography, and wash the glassware from time to time. This is basically how the day's internship went. Teachers often know about our study and life. When we meet, there is always a question, are we studying pharmacy? We immediately feel that our background is insufficient. However, judging from subsequent experiments, this was completely redundant. Although we do not understand the appearance and efficacy of the medicinal materials, we can still complete each step of the experiment excellently. The teacher's satisfied smile is the best affirmation for us.

There is a room in the Department of Traditional Chinese Medicine dedicated to displaying medicinal materials. Some things we see every day are actually medicinal materials, which is beyond our expectation. What’s even more incredible is that there is a leopard skeleton inside. Teacher Wang said that leopards can be used as medicinal materials. It seems that I am really ignorant. There are also some fake medicines inside. When introducing it, Teacher Luo said that fake ones are sometimes harder to get than real ones.

We have to pay for lunch every day by ourselves.

After doing experiments all morning, everyone was tired. Who wanted to go down the mountain to buy food under the scorching sun and then climb up again? We chose to order food, and classmate Wang Qi very enthusiastically became our agent, so we She is affectionately called "the rice tube". Originally, only the students on our floor ordered food together, but the food manager did an excellent job, but there was nothing we could do. Students from other floors also came here because of its reputation. The fast food restaurant must have made a lot of money, but the food manager did not get any compensation. He is such a good person. .

Since the weather is very hot, the director thought of a way to cool down - eating watermelon. Teacher Wang called the fruit shop down the hillside to deliver watermelons every day and put them in the refrigerator. When I go to work at 2:30 in the afternoon, Teacher Wang always enthusiastically cuts iced watermelon for us to eat. Eating a piece of watermelon is sweet and refreshing. It not only drives away the hot air, but also invigorates the spirit of waking up after lunch break.

Afternoon hiking

Teacher Wang once recommended that we go to the mountains to play. In the afternoon of the last day, Lao Guan and I decided to climb Huwei Mountain. Under the scorching sun, we abandoned the main road and chose to climb up the steps in the woods. Gradually, we came to the four-way intersection: up or left or right? The old official observed the steps carefully and found that the steps on the left were much wider, so we continued to take the steps. We only wanted to go up to the weather observatory on the top of the mountain - people call it the "Pearl of the Sea" - to see the scenery, so the wild grass and flowers on the roadside didn't arouse much interest in us. After walking a long way on this road we discovered that it was the way down the mountain. It was inevitable to backtrack, and we decided to climb the stairs leading up. Some steps have been covered by fallen leaves. I "touched the line" - spider silk many times, and I began to think: No one has walked on this road for a long time? Unfortunately, I guessed that we reached the end of the steps, which is the height of the meteorological observatory. High walls and iron railings, no back door to enter. We returned the same way again. After all this trouble, we felt it would be better to just walk along the main road. As a result, tragedy happened again. We returned to the four-way intersection and chose the last direction, and we were really back on the main road. "Well, let's take the high road." I said. Along the way, we passed a tea shop (Teacher Huang once mentioned it) and finally arrived at the bottom of the "Pearl of the Sea". Taking the elevator, we went straight to the 19th floor. The 19th floor is the sightseeing hall, where you can make tea, hold meetings, play mahjong, etc. The only waiter is taking a rest.

Looking towards the sea, high-rise buildings stand tall while the sea water surges, the mountains rise and fall, and the wind and clouds change. What remains unchanged is them; the boats on the sea are moving, and tourists come one after another. What has changed is that human beings. In front of nature, human beings are also insignificant. It is precisely the insignificance of human beings. Such a sense of crisis makes us continue to understand the temper of nature and learn to live in harmony with it. People with insight should be brave. Be first.

After sitting on it for a while, drinking a cup of tea, we went down the mountain along the road.

Gains from the internship

I feel that I gained a lot from this internship.

1. I understand the main functions of the Drug Control Institute:

(1) Supervise and inspect the quality of drugs in the production, operation and use units of drugs within the jurisdiction;

(2) Accept drug inspections entrusted by external units to determine the authenticity and quality of drugs;

(3) Improve drug inspection technology.

2. I learned skills. I had never done thin layer chromatography before in school. This time I had the opportunity to do it myself. Although I did not do it as well as the teacher, I have mastered the principles and methods, which will definitely be of great benefit to my future study and work. In addition, I also learned how to make thin layer chromatography plates, which was taught to me by Teacher Wang.

3. I learned about the relevant knowledge of traditional Chinese medicine. By reading traditional Chinese medicine maps and pharmacopoeia, I have a new understanding of many traditional Chinese medicines. Some of the things I see every day are Chinese medicinal materials! When doing experiments, Teacher Luo will also introduce the main functions of various medicinal materials to use I have benefited a lot.

Every time I want to leave, I feel reluctant to leave. I hope to do experiments again and learn more knowledge. Even if we have studied various chemistry courses in school, during the internship, there is still a lot of knowledge that we do not understand or even do not know at all. We still need to be open-minded and ask for advice, study diligently and ask questions, master the principles, and practice makes perfect. This period of time was busy and fulfilling. Although it was only a small part of university study life, it left its own ups and downs in my memory.

I believe that this internship experience will become a good memory in the future.

Summary of Pharmaceutical Internship Part 2

1. Purpose and Tasks of Production Internship

The pharmaceutical engineering major aims to cultivate students with knowledge in both pharmaceutical technology and pharmaceutical engineering. Basic theories, basic skills and basic methods, with the goal of possessing the basic abilities of product process research, process design of pharmaceutical engineering, production process control and management of product quality control. It will lay the foundation for future work in drug research and development, process design, production and technology improvement, quality control, and pharmaceutical business management. The training characteristics of this major are to combine science and engineering, strengthen practice, and highlight ability cultivation. Pharmaceutical factory production internship is one of the main links in the practical course and an important way to strengthen the cultivation of engineering capabilities.

The Pharmaceutical Preparation Major aims to cultivate students with basic theories and basic skills in pharmacy, pharmaceutics and preparation engineering, master the preparation principles, methods and production processes of pharmaceutical dosage forms, and have the knowledge of dosage form design, process design, product design, etc. Basic abilities such as quality analysis are targeted. It will lay the foundation for future work in drug research and development, process design, production and technology improvement, quality control, and pharmaceutical business management. The characteristics of training are to have both science and engineering, strengthen practice, and highlight ability cultivation. Pharmaceutical factory production internship is one of the main links in the practical course and an important way to strengthen the cultivation of engineering capabilities. Production internship is a practical teaching link that is conducted after students complete all basic courses, professional basic courses and some professional courses.

The purpose and tasks of the production internship are:

1. In-depth production practice, conduct systematic production practice on the industrial production process of pharmaceutical preparations, and further verify, consolidate and deepen the understanding of the professional course theory learned knowledge and enhance perceptual understanding.

2. Learn production operation methods and production experience from workers and technicians, apply the book knowledge learned in production to actual production, and cultivate and exercise students’ ability to discover, analyze and solve problems through practice. .

3. Experience and deepen your understanding of the particularity of the pharmaceutical industry, the role of GMP in product quality assurance in pharmaceutical production, and the importance of the country's implementation of GMP certification.

4. Understand the product types, characteristics and market conditions of the internship company, understand the company's business philosophy and management model, and learn the corporate culture.

Production internship requirements:

1. In accordance with the requirements of the internship syllabus, delve into the actual production, collect relevant information, make internship notes, and strive to complete the internship tasks.

2. Learn advanced production experience, learn practical knowledge and the ability to deal with practical problems from workers and technicians; collect information extensively while actively thinking, looking for existing problems in design and enterprise production management shortcomings.

3. Pay attention to the investigation and research of practical problems existing in production, use the knowledge learned to analyze and compare, and actively put forward your own opinions;

4. Understand product knowledge such as prescriptions and functions Indications, process flow, process control points, etc.; draw workshop floor plans; understand hardware requirements such as plant design, equipment, people flow, and logistics direction according to GMP requirements, and software requirements for technical documents and management documents.

5. Unity and friendship, helping each other, caring for the collective, and maintaining collective honor.

The above requirements can enable students to truly feel their understanding and mastery of theoretical knowledge, their ability to apply knowledge, experience the hard work of work, discover their own shortcomings, and understand the relationship between school and society. The difference is to further improve oneself and improve oneself, so as to prepare the ability and psychology to enter the society.

2. Basic situation of the internship unit and ability to meet internship requirements

The Shaanxi Provincial Food and Drug Inspection Institute was established in August 20____ and was approved by the Provincial Organization Office in October 20____ It was renamed as Shaanxi Provincial Food and Drug Inspection Institute and is affiliated to the Shaanxi Provincial Food and Drug Administration. It is an independent legal entity with full investment. It is one of the 18 national port drug inspection institutes in the country and the only national port drug inspection institute in the northwest region.

In March 20____, it passed the laboratory accreditation of the China National Accreditation Service for Conformity Assessment. It is the seventh provincial-level company in the country to obtain mutual recognition from the member states of the Asia-Pacific Laboratory Accreditation Cooperation (APLAC) and the International Laboratory Accreditation Cooperation (ILAC). The Food and Drug Inspection Institute is one of the six provincial food and drug inspection institutes in the country that undertakes the food safety investigation and evaluation tasks of the State Food and Drug Administration. It has the ability to inspect drugs, biological products, food, health food, health products, pharmaceutical packaging materials, cosmetics and cleanliness testing for a total of 1,516 parameters (varieties). The institute currently has 115 employees, including 95 professional and technical personnel, accounting for 82.6% of the total number of employees; 32 and 37 people with high and intermediate professional titles respectively, accounting for 33.7% and 38.9% of the professional and technical personnel. There are 7 postgraduate tutors and 2 National Pharmacopoeia committee members. 4 people have doctorates, 27 have master's degrees, and 92 have bachelor's degrees or above. There are 8 laboratories including Chinese medicine room, chemistry room, antibiotics room, microbiology room, pharmacology room, food room, biochemistry room, and pharmaceutical packaging materials room, as well as business departments, quality management departments, scientific research departments, experimental equipment departments, and supervision departments. There are 6 business management departments of the Food Safety Risk Assessment Department and 5 functional departments of the office, personnel and education department, finance department, general affairs department, and labor union. The current site covers an area of ??14.76 acres, and the experimental office building area is 5,683 square meters. It has fixed assets of approximately 45.683 million yuan, including 37.751 million yuan in instruments and equipment. There are currently 785 sets (sets) of various types of instruments and equipment, including 63 sets (sets) of large-scale precision instruments.

3. Internship instructors

4. Internship arrangements

The production internship report must be completed according to the following requirements:

1. Cover : Use a unified cover with the school logo, including: internship report name, internship location, professional class, instructor, speaker, start and end time.

2. Foreword: Mainly introduces the basic overview of the internship, including: the nature, purpose, time arrangement, basic tasks, basic requirements, completion status, etc. of the internship.

3. Overview of the internship unit: geographical location of the factory, directly affiliated systems, leading products, economic benefits, management system of the enterprise (administrative management system, production management system, technical management system, quality management system), enterprise Culture etc.

4. Internship content: Prepare according to the requirements of the internship mission statement and the actual situation of the internship. For example, the enterprise internship site can be the workshop, work section or product as the writing system. Including the performance, functions and special management requirements of the main raw and auxiliary materials; a brief description of the production process, process parameters and properties and uses of the main products (process technical conditions, materials and their formulas, operating steps, etc.); the name of the main equipment, Specifications and models, installation requirements, uses and processing effects; GMP and production management and quality management related content.

5. Suggestions: Suggestions or comments on improvements to existing problems or certain features of the internship unit’s production process, equipment, management, etc.

6. Postscript (reflections): Gains in thinking and learning after the production internship, problems existing in the production internship and rationalization suggestions.

Internship performance evaluation:

Internship performance consists of three parts: internship performance and diary, internship report, and internship defense. Internship performance includes attendance during the internship, internship attitude, and practical ability; and refer to the appraisal opinions of the internship unit. Understand the status during the internship by correcting the internship diary. The internship diary includes records of the internship content, analysis of problems, etc.; the internship report includes an overview of the internship process and specific internship content, and summarizes the problems encountered and puts forward reasonable suggestions.

This time***, we received 21 internship notes, which is consistent with the number of internships. It can be seen from the internship notes that the students' internship attitude is quite serious. The vast majority of students are able to practice carefully and take notes according to the requirements of the internship syllabus. The content is rich and informative. Although some handwriting is sloppy, it can reflect the actual situation. The main problem is that students do not pay enough attention to the details of the operation.

***Received internship report with 21 points, which is consistent with the number of interns. The internship reports are all serious, standardized in form, comprehensive in content, clear in handwriting, and neat in graphics. It can be seen that the students have gained a lot. The main problem is that

students cannot use the knowledge they have learned to discover problems in production.

It shows that flexibility needs to be further enhanced. The internship report is measured from aspects such as the standardization of form, correctness of content, workload, emphasis on experience, and whether there are unique insights.

Comprehensive evaluation will be made based on the student’s internship performance, internship notes, and internship report, and the final internship score will be given. The scoring results are: those with scores above 90, and those with scores between 80 and 90. The overall situation of students' internship is good and the purpose of internship has been basically achieved.

6. Problems and suggestions during the internship

This time, the centralized production internship method was adopted. ***21 students successfully completed the internship tasks at the Shaanxi Provincial Food and Drug Inspection Institute and basically reached For the purpose of production internship. However, there are still certain problems in internships as follows:

1. Due to management requirements, the internship units of pharmaceutical companies can accommodate a small number of internship students, and companies consider quality and production safety, so companies are reluctant to accept internships It is difficult for students to contact corporate internship units, so the internship of this group is arranged at the provincial drug testing institute with strong accommodation capacity. However, we still hope that the school will strengthen contact and communication with internship units, and establish a cooperative partnership integrating scientific research, employment, and enrollment with companies with internship contracts at the school level to solve this problem.

2. The internship unit hopes to extend the production internship time, which will facilitate the internship unit to better arrange and organize students, and also enable students to learn more practical knowledge. The internship time was too short, making it difficult to contact the internship unit, and the internship process was also very stressful. Many students reported that the internship period was too short, making it difficult for them to gain a deeper and more comprehensive understanding of the entire process of drug production and the overall situation of pharmaceutical companies in such a short period of time. Therefore, if possible, we hope that the cycle of student production internships can be appropriately extended. We should also focus on internships and multiple factory visits to increase the breadth of internships.

Summary of Pharmacy Specialty Internship Chapter 3

What you see on paper is only shallow, but you know that you have to do it in detail. After three years of studying pharmacy professional knowledge at the university, I deeply felt that my lack of social practice experience and my lack of understanding of drug testing work, and it was with this mood that at the end of August, I went to ____ City The chemical laboratory of the Food and Drug Inspection Institute began a five-week internship.

In the first few days, I mainly learned the operations of high-performance liquid chromatography and gas chromatography from teacher __. She carefully explained to me how to set the chromatographic conditions for liquid and gas phases, how to use pipettes correctly and accurately adjust the volume of volumetric flasks. Since the high-performance liquid chromatograph automatically injects samples, it reduces a lot of errors compared to manual injection. At this time, weighing and constant volume are more important. Inaccurate weighing or constant volume will affect the experimental results. produce larger errors. Another thing that impressed me deeply was that I once made a mistake in the weighing record and scrawled it out a few times. The teacher told me that I could only make one horizontal stroke when modifying the original record, and the original record must be visible. In the past few days, although I only helped the teacher with some trivial work, I still saw from Teacher __ the precise and rigorous attitude of the workers engaged in drug testing, so I must develop myself to be cautious and careful in the future. Be responsible for your own experiments.

During the second to fifth weeks of the internship, I followed Teacher __ to learn and help with the extraction of pharmaceutical preparations, and the scanning of infrared and near-infrared spectra for identification. During this period, I was mainly responsible for the near-infrared spectrum scanning and infrared spectrum scanning of imported drugs and a series of work before and after. The workload of the drug testing institute is very heavy. Almost every day, a variety of pharmaceutical preparations and raw materials need to be measured and identified. Near-infrared scanning of imported drugs is a huge task. I scanned it in more than ten days. More than a hundred drugs.

To scan the infrared spectrum of sustained-release tablets, you first need to grind them, and grinding is precisely the speed-limiting step of this task. Grinding flour looks easy, but it takes time and energy to do it. After grinding hundreds of bottles of pills for a few hours, I almost couldn't hold on anymore. The inside of the mortar was ground smooth, making subsequent grinding more laborious. At this time, I felt that what I needed most was persistence. After grinding the tablets, I worked with the teacher to scan the infrared spectrum. One person was responsible for operating the computer software, and the other was responsible for setting out. Finally, the first scan of more than 300 bottles of Metoprolol extended-release tablets was completed within six hours. .

As far as this task is concerned, I realized that whether I am doing experiments or doing other things in the future, I need to be fully prepared. Of course, I also need to persist and cooperate with the team during the practice, so as to ensure that the task goes smoothly.

Near-infrared scanning of imported drugs is also a huge task. The scanning work needs to be carried out in the pharmaceutical warehouse on the first floor, and the temperature of the warehouse is maintained at 20°C all year round, so it is necessary to overcome the cold and uncomfortable ambient temperature. When I first started doing near-infrared scanning, I was not particularly familiar with its operation. During a background scan, I forgot to insert the test head into the background slot, causing the scan pattern of the latter drug to be incorrect. At the beginning, I subjectively thought that the aluminum-plastic packaging capsule was I also need to take it out before scanning, but this is not the case. The teacher always carefully helped me find the wrong scan pattern and corrected the error in time. During the process of this task, I also learned from the teacher how to reasonably control the time. For example, when the instrument is turned on, preheated and self-tested, the slow-release tablets can be ground into powder. In this way, I can seize the gap to do things, reduce big problems to small, and also It will make the work later a little easier.

In general, during these five weeks of internship, I learned a lot, not only the routine operations of instruments and drug testing, but more importantly, the rigorous and serious work attitude and workers I adhere to the professional ethics of my position every day and learn how to get along with others in the unit. These have also greatly improved myself. Of course, I would also like to express my special thanks to the teachers who guided me during the internship. I am very happy to be able to help them more or less reduce their workload during the five-week internship. On the road to the future, I will take the knowledge I learned here and the confidence I built and walk bravely!

Related articles on pharmacy internship summary:

< p> ★ Pharmacy internship summary

★ Pharmacy internship summary

★ Pharmaceutical hospital internship summary essay

★ 3 pharmacy internship summary essays

★ 3 examples of pharmacy internship experience

★ 3 pharmacy internship summary examples

★ 3 pharmacy hospital internship summary examples

★ Pharmacy Professional Internship Work Summary Sample

★ Pharmacy Professional Internship Report

★ Selected Pharmacy Hospital Internship Summary Sample