Pairing method of shutter door remote controller

The remote controller of the shutter door is an important accessory of the shutter door, which can conveniently control the opening and closing of the shutter door. However, many people don't know how to pair the shutter door remote control. Here's how to pair the shutter door remote control.

Preparatory work/about to start work

Before you start pairing, you need to prepare the following items: 1. Shutter door remote control 2. Shutter door controller 3. Batteries.

Turn on the controller

First, you need to open the shell of the shutter door controller and find the learning key inside the controller.

Learning model

Press the learning key, and the controller will enter the learning mode.

sending signal

In learning mode, press any key on the remote controller, and the remote controller will send a signal to the controller.

Pairing success

When the controller receives the signal from the remote controller, it will automatically successfully pair the remote controller with the controller. At this point, the indicator light of the remote control will flash several times, indicating that the pairing is successful.

Matters needing attention

1. When pairing, the distance between the remote controller and the controller should not be too far, otherwise it will interfere with the signal. 2. When pairing, the battery power of the remote controller must be sufficient, otherwise the signal will be weakened, which will affect the success rate of pairing. 3. When pairing, you must press and hold the button of the remote control, otherwise the signal may not be transmitted. 4. After successful pairing, you can test whether the shutter switch is normal by pressing the button on the remote control.