What are the installation steps and methods of one-button emergency alarm system in schools and kindergartens?

One-click emergency alarm networking system for schools and kindergartens is developed according to the current government safety prevention and control requirements, the grid management requirements of safe cities, safe campuses, safe hospitals, safe communities and cities, the distribution of stability forces of governments and society at all levels, and the advantages of its own fixed-line, 2G, 3G and 4G mobile networks and the Internet.

In case of sudden emergency, one-click alarm and one-click call for help, and the alarm information will be notified to the stability forces at all levels through various communication means, 1 10 alarm center and third-party operation and maintenance platform in the shortest time. At the same time, the jurisdiction will send personnel to understand the type of sudden police situation at the first time, and arrange personnel to dispatch according to the type of police situation to quickly dispatch police. Minimize the alarm time, improve the efficiency of emergency response, realize the prevention and treatment of all the stability forces in the grid, and improve the emergency response ability and self-help and mutual rescue ability under public emergencies.

At present, most schools and kindergartens in China are installing a one-button emergency alarm system. In order to help schools, kindergartens and equipment installers quickly install and use one-button emergency alarm equipment, our company specially made the installation process of one-button emergency alarm system for your reference:

Step 1: Unpack the equipment and connect the antenna. A set of equipment mainly includes one-button emergency alarm host, antenna, rotating alarm lamp, alarm lamp bracket, power adapter and mounting screws.

Zhoujiean technology

Step 2: Connect the spare battery (connecting cable). If there is no spare battery, this step can be omitted.

Step 3: Connect the short antenna.

Step 4: Fix the rotating warning light and connect the warning light wire (note that the two red lines of the rotating warning light are positive and negative).

Step 5: Connect the power cord, plug in the 220V power supply with the power adapter, and connect the two external terminals to the power interface of the motherboard.

Through the above five operations, a set of one-button emergency alarm equipment is basically installed, and the next step is to enter the networking debugging stage.

Step 6: Dismantle the pre-made mobile phone card (note here: 1). The mobile phone card needs to be handled by the owner himself in the business hall, because now the mobile phone numbers are all authenticated by real names. 2. At present, the one-button emergency alarm hosts used in the mainstream are all 4G full netcom, so the mobile phone cards of China Mobile, China Telecom and China Unicom can be used. 3. The equipment is medium card. The above three points need to be prepared by the owner before equipment installation). Insert it into the card slot fixed on the motherboard.

Pay attention to the position where the chip is facing down and the card slot is inclined. Push it gently, and the button inside will automatically fasten:

Step 7: All the above steps are completed, and the next step is to turn on the phone and set the phone number. Pay attention to the voice prompt of the device after booting. Use your portable mobile phone (note that any mobile phone can edit SMS and send it to the calling card in the alarm host).

SMS Edit Form:

Group 1 Tel:123456+15001+Phone number (note that "+"cannot be omitted).

The second group of telephones: 123456+ 15002+ telephone number (note that "+"cannot be omitted).

The third group of telephones: 123456+ 15003+ telephone number (note that "+"cannot be omitted).

(By analogy, up to 8 groups of telephone numbers can be stored. )

For example, the telephone number of your community police station is 0755-1234110, so editing the short message is:123456+15001+0755120.

After the transmission is completed, it can be used normally according to the voice prompt. The above is the installation process of one-button emergency alarm host in schools and kindergartens. Welcome to refer to it!

SMS Edit Form:

Group 1 Tel:123456+15001+Phone number (note that "+"cannot be omitted).

The second group of telephones: 123456+ 15002+ telephone number (note that "+"cannot be omitted).

The third group of telephones: 123456+ 15003+ telephone number (note that "+"cannot be omitted).

(By analogy, up to 8 groups of telephone numbers can be stored. )

For example, the telephone number of your community police station is 0755-1234110, so editing the short message is:123456+15001+0755120.

After the transmission is completed, it can be used normally according to the voice prompt. The above is the installation process of one-button emergency alarm host in schools and kindergartens. Welcome to refer to it!