Subject 3 Night Light Simulation Exam Voice Prompts

Subject 3 night lighting simulation test steps: 1. Voice prompt: Next there will be a test that simulates the use of lights in a night driving scene. Press the voice command within 5 seconds to perform the corresponding lighting operation. Operation: Turn the light to the headlight position. 2. Voice prompt: There is no street light when running at night. Poor lighting: low beam. 3. Voice prompts: Follow at night

Voice prompts for subject three night lighting simulation test

Subject three night lighting simulation test steps:

1. Voice prompts: Follow Next, there will be an exam simulating the use of lights in a night driving scene. Press the voice command within 5 seconds to perform the corresponding lighting operation. Operation: Turn the light to the headlight position.

2. Voice prompt: There is no street light when running at night. Poor lighting: low beam.

3. Voice prompt: Drive in the same direction as the car at night. Operation: low beam

4. Voice prompt: Passing a narrow bridge at night and meeting a motor vehicle: low beam.

5. Voice prompt: Encountered a motor vehicle at night.

Operation: low beam

6. Voice prompt: It is difficult to move due to road traffic obstruction at night: small warning light.

7. Voice prompts: Sharp bends and arch bridge operations at night: alternating low beam and high beam (stop low beam)

8. Voice prompts: Passing through intersections without traffic lights at night (same as above)

9. Voice prompt: Overtaking (same as above)

10. Voice prompt: Driving operation in foggy weather: Warning lights and fog lights

11. End of simulated night scene lighting test , please turn off all lights Action: Turn off all lights.

Tips for driver's license: The first three tests are compulsory. Choose one test for 4.5.7.8.9. 6 seems to be a must. After listening to the voice report, be sure to turn on the lights or turn off the lights at the end.

Subject 3 Night Driving Skills

Night driving mainly assesses the use of vehicle lights at night, when to use high beam and when to use low beam, all of which are required Students should find out for themselves. Let’s first take a look at the operating skills and evaluation criteria for driving at night. Only by knowing clearly can we know which operations will cause us to fail the night exam or deduct points, so as to strengthen your practice in this area.

1. Unable to turn on the lights correctly, unqualified.

2. When driving close to a car in the same direction, you use high beam, which is unqualified.

3. When passing through sharp bends, slopes, arch bridges, crosswalks or intersections without traffic lights, do not use high and low beams alternately. It is unqualified.

4. Failure to use lights as required during meetings is unqualified.

5. Using high beam when turning at an intersection is unqualified.

6. When overtaking, failing to change the high and low beam lights to remind the overtaking vehicle is unqualified.

7. Poor judgment on low-visibility road conditions and unqualified.

8. Using high beam when driving on a well-lit road with street lights is unqualified. Before getting out of the car, check the vehicle's lights, including low beam, high beam, fog lights, etc. , and master the correct use of lights when driving at night.

When driving in front of a vehicle, the distance between the two vehicles should be appropriately lengthened to avoid emergencies at night. Also pay attention to traffic signs and construction signals on the road and try to reduce your speed.

When meeting at night, if the other party does not turn off the high beam, you should slow down immediately and use high beam and low beam continuously to send a signal to the other party to turn off the high beam; if the other party still does not turn off the high beam, , you should stop on the right side of the road to avoid it.

By mastering the above night driving skills and evaluation standards, candidates can effectively avoid losing points in the exam and successfully pass the subject three exam.

Voice prompts for subject 3 night lighting simulation test @2019