How to write a safety self-examination and self-correction report

In accordance with the requirements of the document "Notice of the Office of the People's Government of Muping District, xx City on Issuing the Implementation Plan for the Large-Scale Investigation, Rapid Rectification, and Strict Law Enforcement of Concentrated Actions on Hidden Production Safety Hazards in the District", our company leaders attach great importance to it and actively organize relevant personnel We must do a good job in organizing and mobilizing, and conscientiously carry out self-examination and self-correction, leaving no dead ends. The self-examination and self-correction situation is now reported as follows.

1. Key Inspection Departments

For this self-inspection and self-correction of safety hazards, our company will focus on the machining center, sheet metal workshop, assembly workshop, and three major workshops as key inspection departments.

2. Key inspection contents

1. Equipment and facilities

2. Safety protection facilities

3. Electricity safety

4. Warning signs

3. Self-examination and self-correction results

After investigation, it was found that the warning signs in the workshop of our company's machining center were missing and the warning effect was not achieved. In response to the detected safety hazards, rectification measures should be formulated in a timely manner, responsible persons should be identified, and rectifications should be carried out within a time limit.

In this self-examination and self-correction of safety hazards, our company strictly carried out re-examination and acceptance of all the problems detected. After re-examination and acceptance, all problems were rectified within the deadline. In response to the problems discovered during the inspection, the self-inspection and self-correction reports on safety hazards of each responsible unit also analyzed the causes and formulated preventive measures, which will be strictly implemented and implemented in future production work. The company actively responds to the actions taken by superiors to investigate and quickly rectify potential safety hazards and strictly enforce the law.

Will continue to implement in accordance with the requirements of the document.

Part 2

In order to effectively implement the spirit of the document "Emergency Notice of the Office of the xx Municipal People's Government on Effectively Doing a Good Job in Current Safety Production Work", the center has made unified arrangements with the main leaders according to the requirements Next, organize personnel to conduct comprehensive safety production inspections to identify problems in a timely manner, improve the safety situation of the center, and prevent the occurrence of various safety accidents. The safety production inspection and rectification situation is now reported as follows:

1. Leaders pay attention to and deploy the work.

The main leaders personally studied and formulated the inspection plan. At the same time, they emphasized that multiple serious accidents should serve as warnings, fully understand the importance of self-inspection and self-correction, ensure that this major inspection is implemented, and ensure the safety of the center Production. In order to better carry out safety production work and implement the requirements of "the party and government have equal responsibilities, one post has dual responsibilities", and "managing the industry must manage safety", the center has established a safety inspection team headed by Zhang Weigao, director of the center and secretary of the party group. , personally lead the team to participate in inspections, and personally supervise the implementation of rectification of hidden dangers.

2. Carefully organize and investigate hidden dangers

The central safety inspection team conducts a comprehensive and detailed investigation of security forces, public opinion processing, fire protection facilities, employee fire awareness and other related subjects based on the actual situation of the center. analyze.

(1) Security work is carried out in an orderly manner

The center’s doormen implement visitor registration and 24-hour duty system, and strictly prohibit unknown people from entering the center, creating safety and harmony for cadres and employees working environment. At the same time, the safety of important facilities within the center (such as computer rooms, archives rooms, etc.) is ensured. The service hall has established an inspection system to provide inquiry, lost and found and other services on the basis of maintaining the safe operation of the hall to ensure the safety of unit managers and depositors' personal property.

(2) Standardized handling of public opinion information

Generally, public opinion has a system and is handled according to rules to achieve quick response, early reporting, early control, and early resolution. We attach great importance to external publicity work and release information through multiple channels such as the Internet and SMS to avoid spreading rumors. A first-person responsibility system is implemented for emergency public opinions and emergencies. Once a problem occurs, unified command is carried out according to the plan, implemented at all levels, and forces are quickly mobilized and organized. All functional departments of the center actively cooperate and take effective measures to solve the problem with a unified approach and minimize the impact. Ensure the safety of public opinion.

(3) The fire inspection was fully in place

During this *** inspection, 44 fire extinguishers were inspected. No expired fire extinguishers were found, and 5 of them had a slight lack of pressure; Fire hydrants, fire passages, and fire water pipes are not aged or blocked; fire protection facilities are inspected weekly, and inspection forms are filled out on schedule. The center regularly conducts safety education and training for center employees. The center employees are taught fire protection awareness, are proficient in operating fire extinguishers, and have adequate safety escape training. Some new employees and seconded personnel from banks have little fire protection awareness, and the safety inspection team has formulated corresponding training plans.

(4) Information security hierarchical guarantee

In order to fully ensure the security of the core system of the center, the system is placed in the telecommunications IDC computer room. The constant temperature and humidity in the IDC computer room provide power-off protection for the system and protect the interests of the center’s depository employees from being affected by external factors. The central network is divided into an internal network and an external network that cannot access each other, achieving isolation of internal and external networks, ensuring the security of the center's core data and the property security of deposited employees. However, there are also certain shortcomings. The central computer room lacks professional fire extinguishers for the computer room.

3. Remediation of hidden dangers to ensure production

(1) Implementation of responsibilities

Implement safety production responsibilities and preventive measures to specific personnel and specific positions according to the division of work. and specific links. At the same time, review work will be done well, and relevant personnel will be held accountable for behaviors such as failure to fulfill responsibilities, lack of meticulous work, and dereliction of duty.

(2) Strengthen cooperation

Each functional department performs its safety production management responsibilities. In addition to doing a good job in the safety production work of its own department, it must also provide mutual support and cooperation. The work has truly formed a good pattern of multi-level and multi-faceted efforts to consciously do a good job in safety production, pay attention to safety production, understand and support safety production, and promote safety production to continue to deepen.

(3) Identify hidden dangers, break them down and implement them

This inspection found 10 hidden dangers. Based on the causes of the hidden dangers, a "Work Safety Inspection and Rectification Situation Table" was formulated. . Clarify the rectification measures, responsible departments, and rectification time, require each responsible department to complete the rectification work before the specified date, and track and supervise the rectification situation.

According to the self-examination, the center has assigned people the responsibility for safety work and fixed personnel in key positions, achieving a coordinated situation in which safety is grasped from top to bottom and everyone is responsible. In the future work, we will strictly follow the relevant requirements for production safety and continue to do a good job in the safety management of the center.