5230 girl font direct installation! My mobile phone serial number is 354845047297023. My email is 280051303@qq.com Thank you

One step to sign and install the font driver

The second step is to download the font. Download the compressed file below and decompress each font one by one. Copy the decompressed fonts and put them in the C or E drive folder, C/DATA/Fonts or E/DATA/Fonts (I personally recommend putting them in the C drive). E disk, the mobile phone may not be able to select the large-capacity storage mode, just a personal suggestion). If there is no such folder, create a Fonts in it.

The third step is to shut down and restart.

How to uninstall fonts: shut down, remove the card, then turn on the computer, insert the card, connect the data cable to the computer, find the DATA/FONTS folder on the corresponding disk, delete the font files inside, restore the original fonts and boot directly However, if you change other fonts, delete the font files inside, then copy other fonts into it, and just boot it up, which is convenient and fast.

If you just want to change the font, you can skip the following text.

Installation and uninstallation method:

Before installation, please uninstall the previous font driver Font r outer and font files (including E:/Font r outer.ini C: /Font r outer.ini)

1. After signing, install the font driver Font r outer.LT.for.v9.Build20080619.unsigned.sis

2. Download the compression of the following fonts package, unzip and copy the font file **.ttf to c:\data\fonts\ or e:\data\fonts\

3. Restart the phone, and your favorite fonts will be perfectly displayed.

4. If you want to uninstall or temporarily block Font r outer (such as changing to a new font), you can use the X-plore file manager to modify c:\data\fonts\Font r outer.ini or e:\ Change Enable=1 in data\fonts\Font r outer.ini to Enable=0, then save, shut down, and start the computer. The system's built-in fonts have been restored. Then you can delete the font driver Font r outer.LT in the program management. for.v9.Build20080619, and then delete the font file c:\data\fonts\**.ttf or e:\data\fonts\**.ttf. If you want to change to a new font, you do not need to delete the font driver.

(1) First change the Enable=1 in Font r outer.ini to Enable=0 and restart the phone

(2 ) Go to the fonts folder to delete the original font files and paste the required font files

(3) Then change the Enable=0 in Font r outer.ini to Enable=1, restart the phone, and another The font is now in front of you

5. Solve the problem of shaving head and tail

Modify the contents of Font r outer.ini and change the following values. The official default path of INI is under E:\DATA\FONTS

After change

FixCharMetrics=0 => FixCharMetrics=1

Note that this is not the line FixFontMetrics =0 The two are very similar, so I am posting this to remind everyone that it doesn’t matter if both are changed to 1, but remember

FixCharMetrics=0 must be changed to 1, so that the phenomenon of shaving head and tail can be eliminated. .

Special note: If you still have head shaving after the font correction, please change the global scaling from 100 to 95 to 90 (each model adjusts it by itself, it is different).

ZoomRatio=100------Change it to about 95

ZoomMinSize=0

ZoomMaxSize=48

ZoomRatio Used for proportional scaling of all fonts, the value is a percentage (excluding "%"), the default value is 100

================== ================================================== ===================================

Recommended usage instructions: (If you find the font If there is a phenomenon of shaving head and tail, please make the following changes)

1. If you feel that the default loading font is too small, you can modify the content of the configuration file Font r outer.ini and change the content in it

ZoomRatio=100

ZoomMinSize=0

ZoomMaxSize=48

The ZoomRatio is used for proportional scaling of all fonts, and the value is a percentage (excluding "%" "), the default value is 100, and proper setting can solve the head shaving problem (between 80 and 120). ZoomMinSize adjusts the menu (not greater than 20), software name and desktop calendar font size, and is restricted by ZoomRatio.

2. Some font strokes are too light. You can modify Chroma=100 in the configuration file. Chorma is used to adjust the depth of the font color. When set to 0, the font is transparent!

3. In order to avoid possible incompatibility issues, it is not recommended to install the direct version. The direct-installation version is more likely to have problems.

4. There are many fonts, not necessarily every font can be used on every mobile phone, and not every character library is complete! Please study the tutorial first and then carefully install it yourself!

5. If you want to use the data cable directly after installing the font, you can only install the driver and fonts on the C drive

Font driver (please sign it yourself)

== ================================================== ================================================== =

Freely change the font 20081109Font r outerLT's Font r outer.ini line-by-line detailed explanation

The following content is a Chinese explanation! Font r outer.ini file.

; Font r outer LT settings file, the first character of the comment line must be ";"

[Global]

; Global options section, in which All options affect overall functionality or performance.

Enable=1

; Whether to enable Font r outer.

; Default: 1

NativeFont=1

; 1 - supports GDR fonts, 0 - does not support GDR fonts

; Default: 1

LogLevel=1

; Log detail level: 1-Only record fatal errors, 2-Only record errors, 3-Only record warnings, 4-Record all information, 5-Record running bugs

; The path where the log is located is "C:\Logs\Font r outer "

; Default: 4

ForceAntiAliased=4

; Bitmap font setting (only works on SymbianOS 7 or above)

; 0 - Default effect

; 1 - Favor "monochrome dot matrix effect"

; 2 - Force "monochrome dot matrix effect"

; 3 - Favor "anti-aliasing effect"

; 4 - Force "anti-aliasing effect"

; 5 - Favor Symbian 9.2's Sub-pixel lattice format

; 6 - Force Symbian 9.2 Sub-pixel lattice format

; Default: 4

FixFontMetrics=1

; East Asian font correction

; 0 - No correction

; 1 - Simulate Nokia Chinese font correction

; Default: 0

FixCharMetrics =1

; Automatic correction of inappropriate FixFontMetrics corrections

; 0 - No correction

; 1 - Automatic correction

; Default: 0

; The font file that is not enabled must be an absolute path, such as:

;DisableFontFile=Z:\Resource\Fonts\S60SC***c

;DisableFontFile=S60TCHK***c

ZoomRatio=100

ZoomMinSize=0

ZoomMaxSize=48

; ZoomRatio Used for proportional scaling of all fonts, the value is a percentage (without "%"), the default value is 100.

; ZoomMinSize and ZoomMaxSize limit the scope of global font scaling.

Chroma=100

; Used to adjust the depth of font strokes after turning on the anti-aliasing display effect. The value is a percentage (excluding "%"), and the default value is 100. (Invalid for fonts without anti-aliasing effect).

ExtraFontFile=\Data\Fonts\*.*

; Extended font import path.

[ FontMap]

;Font mapping section

*=*

=*

; Format: font name[@font height] =Font name[@Font height][:Font parameter],Font name[@Font height][:Font parameter]

; Font name[@Font height]=Font name[@Font height][ :Font parameter]

; Font name [@font height] =

; Among them, the first format is the standard Chinese and English mapping to different fonts respectively; the second format represents Do not distinguish between Chinese and English fonts, both use "substitute fonts"; the third format means that Font r outer will ignore the requested font and leave it to Symbian's own font mechanism for processing (as if Font r outer does not exist).

;Font name: the font name defined in the font file, not the font file name (usually you need to get the font name contained in the font file from the font provider, consider it in the next version of Font r outer Add the function of displaying font names).

;Font height: The unit is dot matrix. If it is not included, it means a request to match all font heights. Note that the height used by the Symbian system when requesting a font is not necessarily the actual height of the font, so under normal circumstances, it is not recommended to specify the font height.

;Font name - has the same meaning as above. The font height here refers to the height selected as the actual display font. Note that bitmap fonts usually only contain one or a few certain font heights, while TrueType fonts support any font height within a large range, so for bitmap fonts, the actual displayed font height is only the closest to the value specified here. Close heights are not necessarily exactly equal.

;Font parameters - special attributes can be adjusted for the display font:

; A forced anti-aliasing

; a forced monochrome

; b favors thin fonts

; I favors italics

; i favors vertical fonts

; Y Adjust the Y-axis offset (n means no adjustment)

; W Word spacing (n means no adjustment)

; L Line spacing (n means no adjustment)

; Z Scale (default: 100)

; C Color (default: 100)

;Where "Y" represents the adjustment of the Y-axis offset of the font. When this parameter is not specified, Font r Outer will automatically calculate the optimal Y-axis offset based on the relationship between Chinese and English fonts. However, due to the complexity of the font format, the automatically calculated Y-axis offset may not be the best. In this case, you need to use the "Y" parameter to adjust it. Just follow the letter Y and then adjust the specific value, such as LatinBold13:Y-2 or LatinPlain12:Y1.

; "A" and "a" respectively mean to force the use of "anti-aliasing" effect and to force the use of "monochrome" effect. This parameter has higher priority than the global ForceAntiAliased.

; When using parameters together, just write them continuously, for example: Arial:Y-1A or Arial:AY-1.

; For example:

; Sans MT 936_S60=*

; Sans MT [email=936_S60@11=Microsoft]936_S60@11=Microsoft[/email ] YaHei

; Sans MT [email=936_S60@12=Microsoft]936_S60@12=Microsoft[/email]

[email=YaHei@15:Y-1]YaHei@ 15:Y-1[/email] Time calendar menu information preview and information folder font

; Sans MT [email=936_S60@16]936_S60@16[/email] Shortcut font option font in standby Menu business card Sans MT 936_S60 China Mobile SMS font menu upper bar label

; Sans MT 936_S60=FrLt [email=DFGirl@18:Y1]DFGirl@18:Y1[/email] China Mobile SMS font function Table column label

; Sans MT [email=936_S60@24=FZLiBian-S02:W1]936_S60@24=FZLiBian-S02:W1[/email]

; Sans MT [email=936_S60@30]936_S60@30[/email]=

; S60 3rd-specific options

Series 60 ZDigi=

; UIQ3-specific options< /p>

Monospaced=

Eikon=

Symbol=

Calc=

Calcinv=

Digital=

Organized by Ericlis

For some friends who install the font driver and prompt "update error", you can go directly to the C drive and find c:\data\fonts\Font r outer .ini (maybe it is in the root directory, look for it carefully yourself). At this time, you don’t need to install the font driver and modify it directly according to the above method