How does the satellite receive the signal of the small pot cover?

1. First, you need to know which satellite you want to receive. Aim the antenna at the azimuth and elevation of the satellite, and roughly adjust the antenna to this position.

2. Then select the name of the satellite to be received on the receiver, and then select a channel after confirmation, preferably a channel with strong signal. Generally speaking, the receiver will store the program parameters on these satellites in advance. Select the information key on the remote control to check the quality of the satellite signal.

3. Slowly adjust the azimuth and elevation of the antenna and the polarization angle of the tuner. Adjust patiently and see the length of the signal quality bar. When the antenna is aligned, the signal quality will rise sharply, and images and sounds will jump out instantly.

4. Carefully adjust the azimuth angle, elevation angle and polarization angle of the tuner to the maximum signal quality, and fix the antenna.

Finally, scan all the programs on the satellite again so that the latest program parameters can be stored in the receiver.