What is the signal interruption of the satellite small pot cover?

There may be several reasons for the interruption of the satellite lid signal:

1. The satellite focus is not aimed at the satellite, resulting in weak signal. At this time, it is necessary to adjust the antenna to find the position with the best image and the least clutter, and then move it up and down to fix it in a position without clutter.

2. Bad weather conditions, such as heavy rain, heavy snow and foggy weather, may lead to signal attenuation. In this case, the signal usually returns to normal after the weather improves.

3. There may be water and snow on the pan surface of the satellite antenna, or the antenna is bent or there are obstacles in front of it. In these cases, signal interruption can be alleviated by cleaning water and snow and adjusting antenna position.

4. The signal line from the antenna to the set-top box is damaged or the connector is loose. In this case, it is necessary to check whether the signal line is normal, and if it is damaged, it is necessary to replace it with a new signal line.

5. It may be a problem with the set-top box, such as the power board, which leads to insufficient power supply for the CPU, or the signal interface is damaged.

These are just some possible reasons. If the signal of your small satellite lid is interrupted, it is recommended that you contact professional satellite receiving equipment service personnel for maintenance.