How to get wifi on Great Wall Broadband?

Home network environment wiring:

1, a modem: a modem)-router wan port; Router LAN port-computer.

2. No modem: network cable-router wan port; Router LAN port-computer.

Computer enters the router:

1, computer ip and dns settings are automatically obtained.

2. Open a browser, enter 192. 168. 1 in the address bar (this is the address of the general router or check the login information on the back of the router), and enter the route-enter the user name and password (the default is usually admin).

Set up router dialing:

1. Select PPPoE dial-up (some are ADSL dial-up) in the setup wizard, follow the prompts, enter the user name and password (provided by the Internet service provider), and save.

2. In the network parameters-WAN settings, select normal mode, and in the three options of connection, select PPPoE dialing. The following are the options for automatically connecting, saving and quitting.

Turn on the wireless function of the router.

1, select Wireless Settings-Basic Settings.

2. Check to turn on the wireless function, and then click Save.

Set wifi password

1. wireless settings-wireless security settings-select WPA-PSK/WPA2-PSK.

① Authentication type: automatic.

② Encryption algorithm: AES.

3.PSK password is wireless password. Set the required password.