Geely xingrui instrument panel fault light xingrui indicator light complete collection

202 1 xingrui fault light diagram complete manual

Basic indicators are divided into four categories:

The red indicator light represents danger, and the owner should check the fault before driving.

The yellow indicator light warns the owner, but the corresponding problems should be dealt with in time.

Blue light mainly plays the role of reminding drivers, such as whether to turn on the high beam on the right road section.

When the common lights are turned on, the green indicator lights are turned on, such as low beam lights, width lights and turn signals.

Below is the icon of the starlight indicator (the number corresponds to the icon).

4, cleaning liquid level

When the liquid level is low, the indicator light will light up, which means it is time to add glass water to the glass water storage tank.

5. Brake friction plate

If the thickness of the friction plate becomes thinner and the braking effect becomes worse, it should be replaced in time. In order to prevent wheel braking efficiency from being different, the friction plates on the same axle should be replaced at the same time.

19. Steering locking system

After the steering gear failed, the steering wheel couldn't turn. Don't tow the vehicle at this time, there is danger of accident.

2 1. Tire inflation pressure monitoring system

Cause: The tire skidding causes the air pressure to drop or expand, and the air pressure is too high. It is also possible that the information is not stored again after the tire is replaced, and the vehicle will inform the owner that the tire is abnormal in the form of a fault light.

3 1. Electromechanical parking brake

Used to remind the driver whether the handbrake is completely put down, and the indicator light goes out after releasing the handbrake. If the indicator light flashes continuously, it means that the hand brake is not in place or the braking force is insufficient.

32. Battery capacity

The remaining power is not enough, so you can try to continue driving to charge the battery. If the fault light is still on, you may need to replace the battery.

cooling system

It may be that the temperature is too high, the cooling system is faulty, or the coolant is insufficient.

49. Anti-lock braking system

The fault light is on, indicating that the wheel anti-lock function fails when braking. In addition, the failure of EDS in electronic differential system will also cause the failure light to light up. At this time, if the vehicle presses the brake pedal urgently, there will be risks such as sideslip and tail flick.

Fuel stock

When the symbol lights up for the first time, it means that the remaining fuel is about 8L. If the fault light does not go out after refueling, it is necessary to check whether the vehicle oil circuit is abnormal.

57. Engine oil level

First, the oil pressure is too low; Second, the amount of oil is insufficient. It is recommended to check the oil quantity after 30 minutes of flameout.

60. Electronic Control Driving Stability System (ESP)

Flashing during normal operation. When it is always on, it means that there is a fault or the ESP function is closed. ESP can mainly prevent vehicles from getting out of control.

62. Exhaust gas monitoring system

It may be that the engine failure leads to insufficient combustion, which leads to the exhaust gas purification not reaching the predetermined standard.