How to zero the Honda Civic maintenance lamp and how to zero the Civic maintenance lamp.

Cleaning method of Honda Civic maintenance lamp

1. Press the "A" button and press the brake pedal. You can't give up halfway.

2. Turn the power supply to the "ON" position, and the engine will not start.

3. The characters flash or the display screen flashes.

4. Keep pressing the "A" key, and an ellipsis in the style of "…" will appear on the screen.

5. Release the reset button "A" and release the brake.

6. Turn the ignition switch back to the "OFF" state. The zeroing work has ended.

Cleaning methods of other Honda car maintenance lights 1

1, start the engine.

2. Press the "TRIP" button on the left side of the dashboard until "OIL LIFE" flashes with the mileage, and then release it.

3. Sometimes it is necessary to repeatedly press and release several times to clear the maintenance light.

Cleaning methods of other Honda car maintenance lights II

1. Turn the power to the "ON" position, and the engine will not start.

2. (Repeat quickly) Press the "Display/Information" button to bring up the maintenance interface.

3. Then press the "Enter" key, and information such as oil quantity monitor will appear on the dashboard.

4. Press and hold the "Enter" button continuously until the maintenance light disappears.

The maintenance light reminds the owner that the new maintenance time is up, and it is recommended to maintain it in time. In addition, some models can't be cleared manually, and the codes must be cleared by a special trip computer.

Although the mechanical life of vehicles is longer than before. However, some necessary maintenance work still needs to be carried out, which is also to reduce the later maintenance cost. If you often drive on roads with bad environment, you should carry out specific maintenance even between specified cycles.