What's wrong with all the notification information of Apple 6p?

What's wrong with all the notification information of Apple 6p? 1. Is ringing mode vibration on? Have you selected the following * * * and vibration modes, telephone * *? All the above ringing modes are turned on. Click on the column of notification, telephone number and information, and click on the notification permission.

2. There will be three sound settings when entering the settings. 1 is the notification sound setting, 1 is the media sound (listening to music, games and movies), and 1 is the alarm sound. In this case, you should set the notification sound.

There is a mute switch on the left side of the mobile phone. If the mute switch is turned on, it is useless to set it in the settings.

4. After backup, set-General-Restore-Erase all contents and settings.

Apple 6p, no sound. What's with the amplified sound? There may be two reasons:

1 receiver problem.

2 motherboard problems.

First of all, you have to judge whether it is caused by the system, and set-general-recovery-recovery system settings. If it can't be solved, back up the data, "erase all contents and settings", and then connect a computer (Internet connection is required and ITUNES is installed) to complete automatic activation.

What's wrong with Apple's new WeChat message without sound? Let's click on me in the lower right corner of WeChat! At this time, click Settings on the interface! In the settings, we click on the new message reminder! We click Open to receive new message notifications! Then make sure the sound here is on! If there are no voice prompts from friends or WeChat groups, you may have turned off message reminders. Here we can click on the icon in the upper right corner of the chat interface! Turn off the message on the right and don't disturb the button in that place!

Qq voice has sound, qq message has no sound. What's wrong? QQ message may be turned off.

Log in to QQ, go to My Profile, find the "System Settings" sound page, and see if "Turn off all sounds" is checked. If you cancel directly, you don't check the system prompts at the back, such as friend messages, group messages, friends online and so on. If you don't download new software directly from QQ, Tencent and official website.

What happened to Apple Eight? If there is no sound when using the iPhone 8 mobile phone terminal, it is recommended to check whether the mobile phone terminal is mute. If it is not mute, it is recommended to restart the phone or restore the factory settings and try again.

If none of the above methods can eliminate the fault, it is recommended to go to the official repair point of iPhone for repair.

If you need to inquire about the official repair location of the nearby iPhone, you can inquire through the iPhone official website. The specific query method is as follows:

1. Go to Apple official website and click "Service and Maintenance Information" in "Service and Maintenance" at the bottom;

2. After entering, select the products to be repaired (such as iPhone, Mac, iPad, etc.). );

3. After entering, select "Query Apple Authorized Service Provider" in "Bring Your Own Device";

4. After entering, click "Service", enter the city, select the product to be repaired, click "Go" to display all the official after-sales locations where iPhone equipment can be repaired in this city, and just find the nearest one.

What's wrong with Apple's 6s plus without sound? Try the following methods:

1. Make sure the phone is not silent.

2. The phone may not be able to exit the headset mode. Unplug the headset repeatedly and try again.

3. After unplugging the earphone, the system can't recognize it. Try to turn off the phone and then restart it.

4. It may be that the earphone hole is in poor contact and can be wiped with alcohol. You can also try blowing air into the earphone hole with a hair dryer.

5. If the foreign function is damaged, take the after-sales process for maintenance.

Generally speaking, there is no sound during the iPhone6/Plus call, and the phone is set to mute and turn on the Do Not Disturb mode.

First, check whether the phone is set to mute. The mute button of Apple's mobile phone is on the left side of the phone. Check it carefully.

This is the location of the mute button for iPhone6/Plus. Check it.

Second, it is possible that the mobile phone turned on do not disturb mode.

1. Look at your missed calls first. After entering the mobile phone, you can see your missed calls in the call record. See what important calls you missed, and call back first.

2. We enter the mobile phone settings here. To cancel this mode, you need to cancel it in the phone settings or control center.

3. After entering the phone settings, continue to click the Do Not Disturb mode.

4. Cancel the closing of the timed do not disturb mode time here, and turn on the repeat call switch below.

5. After the repeat call switch here is turned on, the last call is not noticed or received. Then turn on the repeat switch within three minutes for the second time, call the mobile phone again within three minutes, and * * * will remember it. Complete the setup.

6. In addition, we can turn Do Not Disturb mode on or off directly from the control center. Slide your finger up the screen and the control center will appear.

So, if there is no sound when your iPhone6/Plus makes a phone call, nine times out of ten, it is the above two problems. Please try it quickly, so as not to miss important calls in the future. Please leave a message at the bottom of the article if you have any questions.

What's wrong with Apple's 6p receiver and external sound? Hello, landlord, I'm glad to answer your questions. If it's not human factors but the phone itself, please turn on the set sound, then turn on the mute/ringtone, and then turn on all the volume buttons. If there is still no sound, you can restore all settings. If all the settings are restored and there is no sound, it proves that there is something wrong with the cable.

What's wrong with Apple's phone and information? I'm using ios 10 GM version, and I have a similar problem. Visual inspection is a compatibility problem of third-party applications, which can be solved by restarting.