The whole house wifi signal solution, Huawei hands-on experience of H6 routing.

I believe that many people have encountered poor wifi signal at home. This is because the router is placed in the wrong place or the type of home is complicated. Of course, some people have poor wifi signal because of the occlusion of doors or walls. So how to improve this situation, I also tried many methods, such as using multi-antenna routers, or using electric cats and so on. However, the wifi signal at home has not changed as a whole. Finally, I used a router to finally change the wifi signal at home, which can make the signal in every room of our home very strong. Today we will talk about this router, which is Huawei Route H6.

Huawei H6 route consists of two parts, namely a parent route and three child routes. For me, the parent route can be placed in a weak box, and the child routes can be placed in the living room and bedroom study respectively, so that the whole house signal can be used without dead ends. From the appearance, the Huawei routers I contacted are basically white designs, so H6 is no exception. Although many people will say that this design is not resistant to dirt, white is not so abrupt, and the router can be quickly integrated into the home after installation, so I personally think white is good.

In terms of interfaces, this router is very powerful, with 6 LAN interfaces and 1 WAN interface, which is completely enough for our home, so don't worry about too few interfaces.

Why can Huawei route H6 achieve no coverage? This is because it has a parent route, 1 professional child routes and 2 standard child routes. The combination of the three can make the home wireless network coverage. Maybe everyone will say that our family used Mesh to connect to the internet before, but the effect was not very good. Huawei's H6 route is different. It uses HarmonyOS system Mesh+ to connect every router in the home to the network. Not only the switching delay is as low as 20ms, but also the signal that frequently moves around the house is still stable, which may be the difference between this router and most Mesh routers on the market.

It is worth noting that although the appearance of the sub-routes is basically the same, one sub-route is a pro version. The official recommendation is to put this router in the living room, so that the signal coverage effect is wider, and the other two standard routing suggestions are put in the study or bedroom. Although it is a small detail, it also shows that Huawei routers are obviously considered for users in details.

Although the parent route is large and can be well hidden in the weak box, the child router is different. It needs to be placed on the open surface, which may be the reason why Huawei designed the sub-route very small. Huawei H6' s sub-router is very small, which is basically the same size as our common socket. From an aesthetic point of view, it can be quickly integrated with the network cable.

It is also convenient to install, but you need a cable socket at home. My living room, master bedroom and study all have this kind of socket, so I plan to install a Pro sub-router in the living room and a standard sub-router in the master bedroom and study. Just tear off the back glue of the sub-router, and then insert the plug into the cable socket first. Then, stick the sub-router on the cable socket. The whole installation process only takes 30 seconds, and there is no pressure for my small white installation.

This is the effect after installation. You can see that the child router is connected to the network port. If you look at the sub-router from the front, you can't find that it is actually a rear-mounted router. In short, this router is doing very well from an aesthetic point of view.

Not only beautiful, in fact, the biggest feeling that this router makes me use is to solve the problem of uneven signal distribution at home. Before using this router, although a single router could maintain the wifi signal in the whole house, I went into the second bedroom and closed the door, but there was no signal immediately. Every time I encounter this situation, I have a headache. It's embarrassing to leave the door open at night, but the wifi signal will be bad. However, even after the door is closed, the signal is still full when using this router.

In addition, this router supports wifi6+, which not only makes the download speed faster, but also prevents multiple devices from being stuck at the same time. Next, I will actually test this router through software.

This router supports mobile phones, so we need to use it to configure the router before using it. It is not difficult to see from the mobile phone that Huawei's router is really professional. When you use it, you will be asked to design the approximate apartment type of the house, whether it is one bedroom, one living room or four bedrooms and two living rooms, and so on. , which can be set by mobile phone. Not only that, you also need to set the area of the house. In my opinion, this setting is really necessary, which can let the router know the apartment type at home, so as to allocate the WIFI signal strength more effectively.

Do you think it's over when you decorate the apartment? In fact, we can't test the signal of each room by mobile phone, so as to know whether the current router placement position can cover the whole apartment in time. If the hotspot coverage map is green, we need to adjust the router position in time until the whole apartment map is red. To tell the truth, although I am not a professional router expert, I can know the signal situation at home through the hot map in my mobile phone. I have to say that this function is really good, not only can we know the current signal situation at home in time, but also how many devices in that room are connected to the router at a glance.

Moreover, the child routes of the parent router can be managed separately, such as restart time, WIFI timer switching and so on. When we are not working in this room, we can choose to turn it off regularly, which saves electricity and reduces signal interference.

In addition, it is an online protection function for children. Everyone knows that children basically have tablets, but sometimes we can't accompany them every day. At this time, we can protect the Internet through routers. When children want to use the tablet to surf the Internet, we can manage their games, videos, social payments and so on. In this way, even if children secretly play games at home, they can't play games because there is no internet. It can be said that this function is really good.

Finally, talk about the experience. First of all, this router is really good. Sub-routing only needs to be connected to the network cable socket, and because it uses weak electricity, it does not need separate power supply, so the overall sub-routing gives me a simple feeling. In addition, this router can really improve the WiFi signal at home. Before, my second bedroom signal was very poor, especially after I closed the door, the signal was basically only 3 grids. However, after using this router, although the signal will become 3 grids after the door is closed, the signal will become full in about 3 seconds. This is because the mobile phone automatically detects the signal difference and automatically connects to the sub-router in the study, but it will not affect my internet access at all, which is why this router can really improve the WiFi signal at home because

Huawei routes H6, which I think is more suitable for users with strange family types. With a parent route and three child routes, the signal at home can basically become full, no matter how strange, I think it can be solved. Of course, not only the signal is complete, but also the installation and use are relatively simple. Even a small white like me can use it. The parent router can be used directly by setting, and the child router can be directly plugged into the network without setting a network port. Compared with the tedious construction of mesh router, I am the opposite.