How to activate Wanji Technology, etc.

1. Insert and unplug the ETC card twice continuously until "Bluetooth on" is displayed on the electronic tag screen. If "tag is invalid" is displayed twice when plugging and unplugging ETC card without electronic tag, it is normal and does not affect activation. You can also directly press the button at the top of the electronic tag to turn on the Bluetooth function.

2. Turn on Bluetooth and make it visible to everyone. At the same time, open the APP corresponding to Wanji etc device (generally, there is a QR code on the ETC electronic tag to download), and click to enter the device activation interface.

3. Search and select the device to be connected, and the system will automatically connect to Bluetooth, which usually takes a few seconds and will prompt that the connection is successful.

4. Fill in the vehicle information and user information as required, upload the photos of the front face of the vehicle and the installation photos of ETC equipment, and submit them for review. The review time is usually 3-5 working days, and then you will receive SMS notification before you can use it normally.

Extended data

The two buttons of Wanji Technology etc are generally the power button and the Bluetooth on-off button, and different types of OBU devices are slightly different. The Bluetooth switch of Wanji Technology etc is pressed on the top of the electronic tag. If Wanji etc can't turn on Bluetooth, it may be caused by power failure or damage of etc equipment. You can call Wanji ETC customer service at 0 10-58858966 for help.

10,000-machine etc is connected with mobile phone Bluetooth.

1. Bluetooth was not set to "visible to all" when it was turned on, or the Bluetooth turn-on time of 1 10,000 sets of etc devices (about 2 minutes) was exceeded, so the Bluetooth function needs to be turned on again.

2. Some Wanji etc devices may have a pairing password when connected via Bluetooth. The initial password is 0000 or 1234. You can also check the pairing password in the instruction manual of Wanji etc.

3. If the Bluetooth connection exceeds the signal receiving distance (about 10 meter), obstacles, strong magnetism, signal towers, airports, etc. may interfere with the Bluetooth connection, please try the connection operation again away from these places.