How to manually set the zero configuration of Unicom iptv set-top box if it fails?

The steps for manually setting the zero configuration fault of Unicom iptv set-top box are as follows:

1. Manually set the network connection: press the "Menu" button on the remote control of the set-top box, select "System Settings", enter the "Network Settings" page, select "Manual Settings", enter the IP address, subnet mask, gateway and other parameters required for network connection, and confirm the settings.

2. Manually set the IPTV signal source: press the Menu button on the set-top box remote control, select IPTV Settings, enter the Signal Source Settings page, select Manual Settings, enter the address, port number, channel number and other parameters of the IPTV signal source, and confirm the settings.

3. Check the line connection: Check whether the line connection between the set-top box and the network equipment is normal, and ensure that the network cable is connected to the network port of the set-top box and the network port of the router or optical cat.

4. Restart the set-top box and network equipment: If it still can't be used after manual setting, you can try to restart the set-top box and network equipment, which can sometimes solve the problem.

Digital video converter box (STB for short), usually called set-top box or set-top box, is a device that connects TV sets with external signal sources.