How to set short sentences to stimulate the battlefield

1. Where can I change the shortcut phrase to stimulate the battlefield? First of all, we open the exciting battlefield app on the mobile phone and enter the main page, as shown in the figure below.

2/6

On the main page of the stimulus battlefield, find the setting entrance, as shown in the red label position on the page below, at the top left of the page.

3/6

After entering the setting page, as shown in the figure below, find the shortcut message setting entrance at the lower left of the setting page, as shown in the red label position in the figure below.

4/6

Next, enter the quick message settings. Click the change item in the page to enter the message change page.

5/6

The default message in the game is 10, so you can only delete the default message in the left system before adding it.

6/6

After deletion, click the shortcut phrase on the right side of the page to add it to the left side. As shown in the figure below, add. Click OK to save successfully.

2. Stimulate the battlefield, how to add tips? First of all, we open the exciting battlefield app on the mobile phone and enter the main page, as shown in the figure below.

On the main page of the stimulus battlefield, find the setting entrance, as shown in the red label position on the page below, at the top left of the page.

After entering the setting page, as shown in the figure below, find the shortcut message setting entrance at the lower left of the setting page, as shown in the red label position in the figure below.

Next, enter the quick message settings. Click the change item in the page to enter the message change page.

The default message in the game is 10, so you can only delete the default message in the left system before adding it.

After deletion, click the shortcut phrase on the right side of the page to add it to the left side. As shown in the figure below, add. Click OK to save successfully.

3. How to set the battlefield sensitivity? 1. Enter the setting interface.

1

After logging into the home page of the game, click the Settings button in the upper right corner of the home page to enter the settings page.

2

After entering the setting page, the menu bar is on the right side of the page, and click Select Sensitivity Setting in the menu bar to enter the sensitivity setting page.

Step 2: Set the sensitivity.

Sensitivity setting is divided into five aspects: global sensitivity, free lens sensitivity, lens sensitivity, shooting lens sensitivity and gyro sensitivity. First, let's take a look at the setting method of global sensitivity.

Global sensitivity setting

As shown in the figure, set the global sensitivity to custom.

Free lens sensitivity setting

Set the parameters of free lens sensitivity of people and cars and free lens sensitivity of parachuting state to 50%.

Lens sensitivity setting

Set the non-opening mirror to 90%, red dot, hologram and machine drawing to 48%, double mirror to 28%, four mirror to 14% and octamirror to 10%.

Sensitivity setting of shooting lens

Set the non-opening mirror to 90%, red dot, hologram and machine drawing to 52%, 2 times mirror to 27%, 4 times mirror to 20% and 8 times mirror to 8%.

Gyroscope sensitivity setting

Set the non-opening mirror to 100%, red dot, hologram and machine drawing to 200%, double mirror to 80%, four mirror to 53% and octamirror to 18%.

4. How to properly set the sensitivity of stimulating the battlefield? I won't tell you many figures, which is meaningless, because people's proficiency in operation will improve with time. Before you get used to this sensitivity, you naturally want to pursue a faster and more time-saving sense of operation. You can't adapt to the previous high sensitivity, but after a month or two, you may not be sensitive enough, so it doesn't make any sense to say that the Great God sets any parameters. Everyone's feeling, everyone's mobile phone screen size is different, but I have summarized some debugging experience in the training ground for your reference: 1. First of all, do you want to determine whether your sensitivity is based on melee bursts or long-range single-point sniper? There are great differences and contradictions between the two above 4 times mirror. The sensitivity of the gun will be suppressed, which often leads to the instability of long-range snipers. On the other hand, the sensitivity suitable for long-range sniper is too low to suppress the continuous shooting of firearms. My suggestion is that long-range sniper should be the main way to break the mirror above 40%, and the gun can be compensated by gyro and finger sliding.

2. All kinds of power mirrors should be debugged at a long distance. Starting from the red dot hologram corresponding to the 50m target, the power mirror will be upgraded by one step for every 50m increase, and the target pushed to the farthest 300m is the highest 8 times power mirror. 3. Don't just hit the target center in every target practice, and divide it into nine points, that is, there is a bull's-eye in the middle of four corners and four sides, and one * * * is nine points. Use continuous shooting to randomly hit these nine points in sequence or irregularly, and the sooner the better, so as to judge the sensitivity. Raise it deliberately first, and if you can't adapt, you will lose five points until you can hit it easily.

5. Stimulus battlefield sensitivity setting: You can select the uniform three-level setting of "High, Medium and Low" in "Sensitivity Setting-Global Sensitivity", or you can customize the sensitivity one by one.

Lens sensitivity controls the moving speed of the character's own field of vision without shooting. Theoretically, the higher the sensitivity of the lens, the faster the figure turns or turns, so I suggest you turn it up a little. Take the following figure as an example:

Select the "high" order sensitivity recommended by the system. The sensitivity of the third person without opening the mirror is 120%, and the sensitivity of the first person without opening the mirror is 104%, which is enough to meet the basic steering requirements. Of course, you can also make fine adjustments according to your own reaction ability, and it is good to turn 180 quickly and stably.

As for the lens sensitivity after opening the mirror, it is suggested to start debugging with red dot, hologram and machine sight, and then the higher the multiple of the sight, the lower the sensitivity value. Because after opening the mirror, the field of vision is mainly used for aiming, it is necessary to ensure that the lens is as stable as possible, the sensitivity should not be too high, so as not to lose the target with a slight delay, and it should not be too low, so as not to keep up with the moving speed of the target. It is suggested that you get used to the "high" order sensitivity setting recommended by the system first, and then adjust it according to your own conditions.