Why can't I see SMS on Nokia mobile phone 77 10?

Settings are useless, and the only way is to refresh or repair the machine. Before starting the machine, (press "#", "*" and "3" first, and then start the machine (press them together). Note: When pressing, don't. You will see the word "format" 76 10m+3+ launch key+start key manually formatted.

1.*#7370 Mobile phone hard reset (when purchasing resumed)

2. Soft reset of * # 7780 # mobile phone (keep phone number and information after paging)

3. Turn off the mobile phone, press the * # home power button, and you can call the home of mobile phone lovers without prompting.

4. Press the dial key. * key. 3 keys are turned on at the same time until the word "nokia" appears (one key cannot be released during this process), and the "formatting"/"Formatting”/“Formatting appears after a few seconds.

*********************************************************************************

1- Basic recovery (*#7780#): loading. Ini file from your phone's rom, but at the same time, you can keep user data (pictures, third-party applications, etc. ).

2- Full recovery (*#7370#): Erase the data on disk C completely, and all the data and applications stored by users will be lost and written into the default system file.

When using these two methods, the mobile phone will ask you to confirm and enter the security code (default is 12345). Files and applications in the E drive (memory card) will not be affected.

3- If it is a relatively new 60 series mobile phone (Nokia 6600/6620/76 10), the situation will change:

Turn off the phone and press the green call key +'3'+'*' at the same time. You can release it when you start formatting.

4-77 10 hard power grid (whether it is soft or hard, it must be said that there is sufficient power)

Press the two keys on the lower left, and then press the key on the middle right.

At this time, lightly press the power button to start the machine, and release the "Start Button" after starting the machine.

Please note that these three keys cannot be released.

Until the English "format user area" appears, then release three keys and press a key in the upper right corner!

If you lose something, you must make a backup. )