What should I do if I can't see the text message on Li Jing's mobile phone?

1. Confirm whether it is all messages or individual messages. If it is a personal message, confirm whether harassment interception is set; If only the service type SMS cannot be received.

2. If all the short messages can't be viewed, you can go to phone settings → More → Default message (6.0 Yes: Settings → Application → Configure application → Default application → Default SMS application) to confirm whether it is a "message". If it is other (such as mobile phone housekeeper, AMI changing phone, etc. ), you can choose it as a "message".

Solutions to common problems of Jinli mobile phone;

1, I can't see the phone records, information, photo library, post-it notes, etc. So I can't edit the desktop.

Cause analysis:

Guest mode is turned on.

Solution:

Turn off guest mode in system settings. You can tell the customer the purpose of "guest mode" and turn on "guest mode"

There will be "failure"

2. I can't see the address book (contact)

Cause analysis:

Mobile phone, SIM card, etc. There is no check in the Display Category of Contacts.

Solution:

Enter "Contacts" and click "Menu Key"-> "Display Classification" to set the display classification, such as "All Contacts".

3. Do not turn on the machine without charging (especially the all-in-one machine)

Cause analysis:

A large part of the reason for not charging and turning on the phone is low battery power (the battery power is reduced due to excessive discharge of the mobile phone). It's just an illusion to activate the battery without charging or turning it on.

Solution:

It usually takes several minutes to ten minutes (sometimes it may take longer) to activate the battery when charging the mobile phone with the original charger. Display charging information and restart the machine. Using a charger with large charging current (ensure that the charger is made by a regular manufacturer and the charging current does not exceed 1.5A) can speed up the activation process. The all-in-one machine can also use the power-on button+volume-down button for 7.5 seconds to reactivate the battery.

How to use the battery correctly:

1, don't wait until the battery is completely dead before recharging, that is, to avoid excessive discharge;

2. The lithium battery can be charged on demand, and it is not necessary to wait until the battery is dead. At the same time, be careful not to charge for too long (overcharge).

4. The photo is white

Cause analysis:

1, mobile phone ROOT (smartphones that are above or listed before root (20 13 does not allow root, which will cause some problems, one of which is whitening).

2. Institutional reasons;

3. Hardware failure.

Solution:

1. First, enter the command "*#7552#" to see if it is the root command. If the display result is "normal" instead of "root", try to restore the factory settings and see if it can be solved.

2. If the factory settings cannot be restored, the input command "*#7552#" is displayed as "Read" or "Your system has been modified by ROOT, and the original ROM has been brushed" (the mobile phone is root), and it must be sent to the after-sales service.