How to tell the authenticity of Bulls Martin boots

The method of distinguishing true and false bull family Martin boots.

1, we should distinguish the authenticity of leather. Natural leather is genuine leather with pores. When it is difficult to see clearly with eyes, you can press the leather surface with your thumb to see if there are fine dermatoglyphics next to your thumb.

2. Check the sewing thread of the vamp and the glue seam of the sole, and identify the quality of processing and production, to see if there is any broken thread, whether the sewing thread of the vamp is neat and standardized, whether the seam of the sole of the leather shoes is coated with glue, and whether the adhesion is smooth and without grooves, empty seams and signs of glue opening.

3. Touch the inner cavity of the shoe with your hand to see if there are irregularities on the inner side and insole of the shoe. Where you can touch your feet, you must not be uneven. There must be an insole in the shoes. The function of the insole is to keep the shoes clean, cover the uneven nail holes on the insole and improve the touch of the feet.

4. Pinch the heel of the vamp by hand to see if it has hardness and elasticity. It is required that the heel should have no groove marks, and the elasticity under the ankle should be good, not too good, which will damage the ankle.

5. Press the insole at the waist to see if it is hard. The insole of a shoe is the trunk and skeleton of the shoe. Press the insole hard, and it is best not to move. If the skeleton and trunk are not stiff, shoes will inevitably deform and damage the foot shape.

6. Put the shoes flat on the table or glass plate at will, and check whether the shoes are stable. When the shoes are placed on the table, stop shaking from side to side immediately.

7. Insert the tip of the middle finger into the bottom of the toe sole to see if the toe height is appropriate. When the toe of the toe is just enough for the belly thickness of the middle finger, it means that the toe of the toe is just right.

8. Hold the shoes by hand to see if the contact between the sole and the heel is stable. Gently lean the sole and heel against the side of the table, so that the side of the shoe is up, and check the contact part of the sole.

9. Put the shoes flat on the table and check whether they are correct from both front and back directions. First of all, from the toe to the back, observe the dimensions of the inner and outer edges of the sole inclined away from the table. There is not much difference, so it is better to keep a balance.