Redmi k50pro can't connect 5 g.

Your current area is not within the coverage of 5G network, or the signal reception is unstable, which makes K50 unable to receive 5G network. K50 mobile phone didn't turn on the 5G switch. You can enter the mobile phone settings and enable the dual card and the 5G switch in the mobile network.

The first situation is that a friend mentioned below that there is no 5G signal coverage in your area, so you can't use the 5G network. I suggest you also consult your local operator to see if the 5G network has been covered.

First, open Redmi k50 mobile phone to enter the mobile phone settings, and click Dual Card and Mobile Network. Secondly, enter the interface and click on the 5G network. Finally, enter the interface and click to open the 5G network display.

Confirm whether the flight mode is turned on: On Settings-General Settings-Flight Mode. If it is already open, please close it. Check whether the SIM card is inserted correctly: Please make sure that the SIM card is inserted correctly and is not damaged. You can try reseating the SIM card.

Enter the system settings, and click Dual Card and Network; Then in the network settings, click on the 5G network; Finally, turn on the 5G network function.

Access Settings-(Dual Card and) Mobile Network-SIM Card Information and Settings-Select the corresponding operator (Mobile/Unicom/Telecom) to access-Enable 5G. When the switch is on, it means that the 5G switch is on. If the 5G Internet access function is turned on, a 5G message will be displayed at the top of the mobile phone screen.