Xiaomi 2 brushed the machine into bricks.

Self-rescue measures for brush failure;

1. First, download and install the Android SDK program on the computer. Please go directly to Android SDK official website for the specific download address and installation configuration method.

2. Connect the mobile phone and computer with USB data cable, turn on the mobile phone, and the computer will automatically prompt to install the device driver. Select a custom driver location (don't let the system find the driver installation itself). Because the Android SDK program has been installed before, the driver location in this step will default to the usb_driver subdirectory under the Android SDK installation directory, and then choose to install the driver from this directory.

3. Download the available recovery program that matches your own model, and recommend using the most commonly used clock recovery program. It is recommended that the downloaded recovery program be backed up in a specific directory;

4. Install the recovery program, click "Start"-"Run" in the lower left corner of the desktop on the computer, enter cmd, press enter to open the command prompt, enter #adb devices, and press enter. After that, if a serial number is returned, indicating that the mobile phone is connected normally, then use the cd command at the command prompt to switch to the directory where the recovery program is located, and then enter the following lines of commands, and enter a new line:

#adb restarts the bootloader (after entering the car, the mobile phone will enter the quick start mode, and then execute the following command to install the recovery program on the mobile phone).

# fastboot flash recovery-ra-magic-v2.3.1.img (if you see the following prompt after entering the car, the recovery program has been successfully installed).

Quick start and quick recovery -RA-Magic-v2.3. 1.img

Sending "Restore" (4594 KB) ... Normal.

Write' recovery' ... OK.

5. Then unplug the USB cable of the mobile phone to disconnect the connection between the mobile phone and the computer, then turn off the mobile phone and try to press the specified key to enter the recovery mode. If you can, it means that you have been resurrected successfully, and you can brush your favorite ROM.