Minutes of safety production meeting

In daily study, work and life, more and more places need to use meeting minutes. Meeting minutes are different from meeting minutes, which are just an objective documentary material. Don't you know when you will draft the minutes of the meeting? The following is the summary of the safety production meeting I collected. Welcome to read the collection.

Minutes of safety production meeting 1 time: xx years x months x days.

Venue: conference room

Conference theme: Safety production conference:

Main contents:

1, check and analyze the current situation of safety production, put forward rectification measures for potential safety hazards, and strictly supervise the implementation of rectification.

2, determine the establishment of safety production standardization leading group, and organize the division of labor, organized by the general manager, the Ministry of security specific implementation.

3. Improve and revise the safety management system and make a safety checklist.

4. Require all departments and workshops to strengthen safety education, pay attention to fire prevention, and strengthen on-site monitoring. Safety management personnel should strengthen inspections according to the characteristics of dry and windy spring.

5. All workshop departments should conscientiously do a good job in investigation and management according to the hidden danger investigation table.

Minutes of Safety Production Meeting 2 Participants: Company leaders, department heads and project department heads. The main contents of the meeting are: annual work and arrangement of production safety.

I. Purpose of the meeting:

In order to strengthen the company's construction safety management, effectively prevent the occurrence of all kinds of safety accidents, and ensure the successful completion of various safety work objectives and tasks of XX Company, this safety production work conference is specially held to arrange and deploy the safety production work of XX Company.

Second, the content of the meeting:

1, the company's safety work goal is to achieve no safety accidents and zero accidents throughout the year.

2. Fully implement the responsibility system for production safety, and sign the target responsibility book for production safety at different levels. The company shall sign a responsibility letter for production safety with the project department of resumption of work in strict accordance with the requirements of management measures, and clarify the responsibilities and work of both parties. Adhere to the principle of "production must be managed safely", hold regular safety meetings and organize safety inspections. All departments, teams and groups, important posts and individuals with special posts should also sign the responsibility book of safety production targets.

3, improve the safety rules and regulations, make the enterprise safety work have laws to follow, adjust the safety management focus according to the actual situation of the company, meet the superior safety inspection work, summarize the shortcomings in safety work, and actively improve. We must resolutely implement the leadership responsibility system for the rectification of hidden dangers of accidents and implement management step by step. The safety leaders of the company must be responsible for the hidden dangers of accidents on the construction site, rectify and implement them within a time limit, make the responsibilities clear and the assessment in place, and make the daily management "five in place", that is, organization in place, responsibility in place, inspection in place, assessment in place and rewards and punishments in place.

4. In order to make the awareness of safety in production deeply rooted in people's hearts and everyone establish the idea of "safety first, prevention first", the company regularly holds safety production work meetings, with no less than one regular safety meeting and safety inspection every month; Attach importance to safety training and education, organize safety education activities at least once every quarter, and organize all departments, project departments, construction personnel and full-time security officers to participate; Strengthen the training, evidence collection, review, inspection and management of operators of special types of work, and it is strictly forbidden to work without a license. Conduct "three-level" safety education for new personnel entering the construction site, and make education records. Only after passing the examination can you take up your post, and the education rate should reach 100%, and a three-level education card should be established.

5. Strictly implement the "safety inspection" system, and the company adopts a combination of regular inspection and random inspection to implement dynamic management of safety production. Such as seasonal safety inspection, rainy season construction safety inspection, special sensitive period safety inspection, lightning protection, fire prevention, heatstroke prevention, etc. , to find out the hidden dangers to rectification, re-examination unqualified to be punished, shall be investigated for the responsibility of the relevant personnel, stop rectification until qualified.

6. The company actively participated in the activity of "Creating a Safe and Civilized Construction Site" and worked out the standard-reaching plan in combination with the actual situation of the company and the project. The company should strive for civilized construction site according to the standard of civilized construction site and strengthen the inspection of civilized construction site.

7, strengthen the supervision and management of safety protection articles and facilities, safety protection articles (safety net, helmet, seat belt, insulated shoes, etc. ) must be a qualified product in line with relevant national norms and standards. Machinery entering the construction site shall be accepted at the site, and unqualified machinery shall not be used.

8. According to the actual situation of the company, formulate emergency plans for production safety, establish emergency rescue organizations, set up leading groups for emergency handling of major safety accidents, organize relevant emergency drills, and prepare sufficient emergency rescue equipment to minimize personnel and property losses.

9. According to the company's safety production meeting system, hold regular safety production meetings every month to summarize, solve and arrange safety production work.

Minutes of safety production meeting. The meeting conveyed the spirit of the work conference on preventing serious accidents in the construction field of the whole province in the first quarter of XX.

In X years, the situation of construction safety production in the whole province was generally stable, mainly manifested as "two year-on-year declines": First, the number of accidents and deaths were basically the same year-on-year, with a slight decline. Second, the number of construction accidents and casualties in most areas decreased year-on-year. However, the death toll of construction accidents in our province still ranks among the top three in all provinces and cities in China, and the situation of safe production is still grim.

Two, the meeting requested that all localities should pay close attention to the following six aspects of work:

1, and work out the safety work plan for XX. All localities should take the initiative to find ways to do a good job in advance, strive for early planning and early preparation, and ensure that the construction safety production in our city will continue to maintain overall stability this year.

2, ready to meet the safety production supervision responsibility assessment. This year, the Provincial Department of Construction will assess the safety production supervision responsibilities of construction administrative departments at all levels and construction safety supervision institutions. All localities can organize their own pre-examination, strengthen the construction of supervision team, improve relevant management systems, and at the same time take the initiative to communicate with higher authorities for guidance.

3 continue to do a good job in the implementation of the "safe card" system. At present, the holding rate of "Ping An Card" for construction workers in our city is about 40%. First, it is necessary to improve the holding rate of "safe card" for construction workers in our city, and second, it is necessary to manage "safe card" humanely.

4. It is necessary to further strengthen the implementation of dynamic management measures for construction safety in Guangdong Provincial Construction Department. All localities should earnestly strengthen supervision and inspection, and resolutely deduct points from illegal enterprises and individuals.

5, continue to implement the safety production license system, strengthen the sense of responsibility of construction units, supervision units and related personnel.

6. Strengthen the safety technical management of construction projects, and improve the inspection of construction organization design and implementation of special schemes.

3. The meeting stressed that all localities should earnestly do a good job in construction safety production this winter and next spring, make careful arrangements and pay close attention to implementation.

In particular, due to the recent impact of low-temperature rain and fog weather, we should attach great importance to ensuring that no safety accidents occur during the "two sessions" of the country; To keep a clear head and improve the understanding of the concept of "security risk", we should change from focusing on the management of "things" to focusing on the management of "people", because the emergence of "security risk" in the management of "people" is even more terrible; We should conscientiously sum up the safety supervision work in XX years, sum up experiences and lessons, and lay a theoretical foundation for the construction safety supervision work in XX years.

Participants at the meeting: Zhang Yongle, Jiangmen Construction Bureau, Qi Rongzhan, He Ming, Chen Guangyuan, Qiu, Huang Huaixin, Hua Youkun, Lu, Liu Guangsheng, Chen, Zhao Jianbo, Liang Yu, Liang, Pengjiang Construction Bureau, Jianghai Construction Bureau, Yao Juncheng, Xinhui Construction Bureau, Liu Zhenning and Heshan Construction Bureau Li Yongcan.

Minutes of safety production meeting 4 times: xx year, X month, X day.

Venue: conference room

Conference theme: Safety production conference:

Main contents:

The meeting made arrangements for the work of safety in production in 20xx:

The analysis of 1.20xx annual safety production operation shows that the overall operation is stable.

2. Examine and approve the 20xx annual work plan for production safety and the investment plan for production safety expenses, and arrange the annual work for production safety according to the work plan.

3. Please ask the finance department to do a good job of extracting the annual safety production expenses of 20xx.

4. Decompose the annual safety production target, and require all departments and workshops to make work arrangement and safety assessment according to the safety target.

5. Strictly implement the 20xx annual production safety commitment system and sign the 20xx annual production safety commitment letter.

6. Strictly implement the hidden danger investigation system, do a good job in safety hidden danger investigation, rectify the hidden dangers found within a limited time, and pay a return visit in time.

7. Arrange safety inspection after the meeting.

Minutes of Safety Production Meeting 5 Meeting Time:

Meeting place:

Participants: See the sign-in form.

General contractor:

Subcontractor:

Moderator:

Main contents of the meeting:

The safety and civilization of the construction site of Building No.2, the planning and classification of site materials, project quality, project progress and other issues.

A, safe and civilized construction

1. Materials on the construction site shall be classified and neatly stacked. Turnover materials, finished materials and raw materials shall not be piled up at will. Steel pipes should be stacked in layers according to different lengths on scaffolding.

2. The steel yard should be isolated separately, with only small doors for personnel to enter and leave, and enclosed by scaffolding. The safety and civilized slogan of the steel processing shed needs to be reset.

3. Strengthen the protection of the south safe passage, and set up safety and civilized slogans at the entrance of the passage as required.

4. The steel bar waste at the gate of the construction site should be rearranged, and the steel bar waste should be stored in the masonry waste pool.

5. Reorganize the southwest site of Building No.2, build multi-layer shelves with pipe supports, and lay wooden boards stacked with steel pipes, fasteners, jacking wires and other materials. 6. Flammable and explosive articles (such as acetylene and oxygen) should be stored separately in a cool place, away from open flames. 7. Set up a safety protection shed above the ground pump, and add safety and civilized slogans. The foundation pit on the north side of the pump truck is surrounded by steel pipes.

8. The construction machinery of the labor party must be "one machine, one box, one brake and one protection" according to the specification requirements, and check the temporary electricity consumption at the construction site. It is forbidden to pull and connect randomly to eliminate potential safety hazards. The primary box and secondary box should be marked, and the power system diagram should be posted in the distribution box.

9, the construction site road cleaning and maintenance, the project department and the employer take turns cleaning every week.

10, scaffolder's cantilever scaffold erection does not meet the specification requirements. The overlapping length of bracing shall be at least one meter, and the number of rotating fasteners in the overlapping area shall not be less than three. The angle of support is between 45 degrees and 60 degrees. The safety net should be replaced in time, and the "four ports and ten sides" protection must be in place.

1 1. There are potential safety hazards on the unloading platform. The length of the unloading platform extending into the building is not less than 1.5m, and the lengths of the wire ropes on both sides are inconsistent (resulting in uneven unloading). The upward inclination angle of the platform is insufficient, so there are no safety protection measures and no limited redrawing.

12. When using "Three Treasures", you must wear a safety belt (hanging high and using low) when working at height, and you must wear a safety helmet when entering the construction site, and offenders will be fined according to the regulations of the project department.

13, elevator shaft protection is not in place, and adjacent holes and vents should be protected layer by layer.

14, requiring the tower company to inspect the tower crane once a week and form inspection records. The tower company must climb the ladder between the upper and lower operation rooms, and it is forbidden to use scaffolding to climb the tower crane from the building.

15, when working in dangerous areas (high altitude, near the hole, etc.). ), it is forbidden to answer the phone to prevent safety accidents.

16, be careful when smoking in the construction site, and don't throw cigarette butts anywhere, which may easily cause fire.

17. Report the work license of special operators (issued by the Ministry of Construction), work license of safety personnel and safety assessment certificate to the project department for the record.

The above safety and civilization problems will be rectified within three days, otherwise 16 building will not be settled.

Second, the project quality

1. In order to ensure the water use in the construction site (main structure and subsidiary structure), it is decided to build a reservoir in the construction site. Specific matters shall be negotiated by the project department, the labor service company and the secondary structure party.

2. After the reservoir is built, the plumber's union will connect a tee from the reservoir to each floor upstairs, which will be used as water for the secondary structure.

3. Because the cement stirrups are not practical, it is impossible to guarantee the spacing requirements of double-layer steel bars, so Dongfu Labor Service Company is required to replace the cement stirrups with steel stirrups from the16th floor.

4. After each layer of steel bar is inspected, the steel bar team shall conduct self-inspection, and the steel bar team leader shall take the lead in the inspection. After passing the inspection, it shall be reported to the labor service unit, and finally to the project department for inspection and notification to the supervision unit, so as to establish a simple and convenient system. When the roof reinforcement is inspected, the finished product shall be protected to prevent the reinforcement from being trampled, otherwise the reinforcement shall not be provided.

5, pouring concrete must be cured, curing time shall not be less than 7 days, with the same conditions of the block on the same floor without leaving a dead angle.

6. Since 16 layer, the formwork of post-cast strip shall be provided with a separate support system, otherwise it will not be accepted.

7. Due to the tight construction period, carpenters should clean up the construction waste in time after formwork removal, so as not to affect the secondary structure construction, otherwise they will be fined.

8, carpentry and steel bar work time reasonable lap, cooperate with each other, can not appear after clamping steel bar scene, or ordered to rework to correct; Masonry works, bricklayers and electricians should cooperate with each other, and there should be no wall gouging in the later period, otherwise a fine of 5000 yuan will be imposed and maintenance will be carried out.

Third, the progress of the project

1, since 16 layer, the concrete pouring time must be reasonable, and the pouring time shall not be too long due to mechanical or artificial reasons, otherwise economic measures will be taken.

2, the project department to ensure good workability of commercial concrete, meet the construction requirements, labor units in concrete quality problems need to inform the project department to solve, not to add water, or find a fine of fifty thousand yuan.

3. Starting from the second floor, clear it layer by layer, and give each layer to the secondary structural party. For the smooth construction of the secondary structure, workers will be arranged to clean up as soon as possible. If the labor service company does not clean it up as soon as possible, the secondary structural party will send someone to clean it up, and the expenses incurred will be deducted from the project payment of the labor service company.

3. The project progress this week will be based on the actual situation. On Thursday, the project department and the labor service company will make a weekly progress plan according to the actual situation. After both parties sign, the construction will be carried out according to the schedule, and a week later, comparative analysis and rectification will be carried out. If the progress is delayed due to the subjective reasons of the laborer, the economic penalty will be imposed according to the lag time.

The minutes of this meeting shall have the same legal effect as the project contract, and can be used as the basis for project payment settlement, which is valid for all types of work.

Minutes of Safety Production Meeting 6 Meeting Time: 20xx year x month x day

Venue: Student Union Office

Attendant: All members of the Red Cross Affairs Department.

Moderator: Minister X.

Recorded by: x

The contents of the meeting are as follows: (The meeting is mainly attended by Minister Li Ding, supplemented by the deputy ministerial level. )。

First, several problems recently discovered

1. Some students are complaining about their work, and their attitude is not positive. I hope everyone can understand each other and unite as one.

I hope everyone can overcome the difficulties in voluntary service activities.

Everyone should have a sense of collective honor and departmental honor.

2. The probation period is one month.

2. The nature of my work:

Carry out voluntary service activities in medical care, first aid, health and other aspects, and participate in voluntary activities carried out by other departments of the school journal.

Three. Recent work arrangements:

1. China-Korea exchange meeting (13-15) requires volunteers to provide voluntary services. Count the students who are willing.

2. Next Thursday (65438+1October 20th), the adult ceremony of "blood donation to commemorate growth" will be held in cooperation with X Blood Center, and there will be a whole day's segmented duty table to count the duty time.

3. Students who participated in the volunteer activities of the School of Journalism on the date of 13- 15 and from Wednesday to Friday need to collect the volunteer cards from the office in the morning of the first class and return them in the last class.

4. Saturday night departmental dinner

I hope everyone will speak freely at the regular meeting of the school journal association next Wednesday.

Four. Some details

1. Everyone should pay attention to receiving mass emails and reply.

2. Leave must have a note, and send it by mass mail later.

3. In the future, regular departmental meetings will arrive 10 minutes earlier, and regular Tzu Chi meetings will arrive 15 minutes earlier.

Future departmental meetings may be arranged every Friday.

5. SMS reply is polite to avoid delay.

6. The mobile phone is silent during the meeting.

7. Pay special attention to politeness to brothers and sisters in other departments.

8. Pay attention to the format and content of official document writing.

9. Newcomers can talk to their brothers and sisters more, pay attention to the time and avoid taking a break in class.

Verb (abbreviation for verb) freedom of speech.

1. the significance of joining the record association

2. How to become a member of the Red Cross?

3. How to handle the relationship between work and study?

The intransitive verb X introduced some future activities.

1. Blood collection vehicles will enter the campus once a month in conjunction with X Blood Center. Starting from this semester, I will plan the theme every month. I hope you can give me more advice.

2. Cooperate with the school hospital to train members of the Red Cross.

3.65438+February 1 World AIDS Day Publicity.

4.65438+ February First Aid Knowledge Competition

5.65438+ February Garden Party.

6. On March 24th, TB prevention and control publicity activities.

7. In early May, members of the Red Cross were recruited.

8. Training for Red Cross members in May

At the end of the meeting, the minister emphasized "responsibility".

Minutes of Work Safety Meeting On the morning of July ~ April 15, Mayor xxx of the town government presided over the first quarter work safety meeting in the conference room on the third floor of the town government. Members of the Town Safety Committee attended the meeting, conveying the spirit of the recent county-wide safety production work conference, and listened to the safety production work reports of the heads of public security police stations, power supply stations, geological disaster prevention and flood control, etc. The meeting reported the safety production situation of the whole town in and put forward opinions on the work. The minutes of the meeting are as follows:

First, the meeting pointed out that:

In, with the joint efforts of the members of the Town Safety Committee, the overall safety production in our town remained stable. From June to March, 65438, the situation of production safety in our town was generally stable. However, the foundation of safe production is still weak, especially the owners' sense of responsibility for safe production is weak, and the road traffic safety hidden danger is serious. The meeting informed that a safety accident occurred in Baofa Comprehensive Processing Factory on the evening of April 10, requiring all relevant responsible units and persons to attach great importance to it, strengthen supervision and pay close attention to the implementation of rectification measures to effectively prevent serious accidents.

Second, the meeting emphasized that:

All responsible units and responsible persons must raise awareness and enhance their responsibilities; It is necessary to conduct regular and comprehensive inspections and find problems in time; It is necessary to promptly urge rectification and eliminate hidden dangers; To strengthen cooperation, pay close attention to * * * management, do a solid job in the current work safety, and create a safe, stable and harmonious society.

Three. Meeting requirements:

All relevant responsible units and responsible persons should strictly follow the deployment and requirements of the higher authorities on safety production work, and combine the actual work and the scope of responsibility to earnestly do a good job in the current safety production work.

1, strengthen publicity and training.

It is necessary to organize all production enterprises to conduct publicity, education and skills training for special post personnel who must hold certificates and strictly implement and abide by laws, regulations and policies on production safety, and establish the consciousness that "production must be safe first" and "safety is the greatest benefit"; Villages should cooperate with the police station to carry out a comprehensive road traffic safety education and rectification activities.

2, strengthen the responsibility, clear work objectives, pay close attention to the implementation of the responsibility system for production safety.

Firmly establish the concept that development is the first priority and safety is the first responsibility.

Pay attention to safety production and consciously put safety production in action. With reference to the control indicators issued by the county government, at the beginning of the year, our town formulated practical safety production responsibility targets, signed safety production target responsibility letters with village committees, relevant departments and enterprises, and implemented the safety production responsibility system layer by layer, so as to truly make the responsibility clear, the responsibility to people, strict management and truly implement the responsibility.

3, to continue to deepen the investigation and management of hidden dangers, do a good job in the supervision of production safety in key industries.

(1) Establish classified management of hidden dangers and classified monitoring system of major hazard sources from two levels of government and enterprises, so as to institutionalize and regularize the investigation and management of hidden dangers and resolutely put an end to new hidden dangers. Enterprises should comprehensively investigate hidden dangers, implement rectification responsibilities, funds and monitoring measures for all kinds of hidden dangers that may cause accidents, and make rectification within a time limit to ensure safe production. The government should strengthen guidance, supervise the establishment of hidden danger investigation and management database, and regularly supervise the hidden danger investigation and management. Improve the quarterly meeting system, safety production performance reporting system, safety education and training system, and improve the emergency rescue plan system of relevant departments. Implement three requirements: first, carefully investigate hidden dangers, leaving no blind spots and dead ends; Second, the responsibility, measures, funds, time limit and implementation of the fifth plan for the rectification of hidden dangers; The third is to establish and improve the classification management mechanism of major hidden dangers and consolidate the results of hidden dangers management.

(2) Intensify the investigation of safety accidents, investigate and deal with serious accidents, strictly investigate the responsibilities, and earnestly implement the safety responsibility system. In accordance with the principle of "four don't let go" (the cause is unclear, the responsible person does not deal with it, the workers do not educate, and there are no preventive measures).

(three) focus on deepening the special rectification work of production safety. The member units of the Town Safety Committee shall, according to the functions of their departments, regularly carry out special rectification work for production safety, and carry out various special rectification activities such as road traffic safety, safety of dangerous chemicals, safety of non-coal mines, safety of civil explosive equipment and fireworks, safety of boilers and pressure vessels, construction safety, fire safety and school safety.

In the second quarter, the work of safety in production showed two characteristics: First, May Day came, and second, geological disasters such as landslides were prone to occur in the spring and summer rainy season. These are the key and difficult points in the work of safety production, and all the work of safety production in the next stage should be implemented. ① Safety rectification of hazardous chemicals, eliminating safety rectification, resolutely closing and banning "three-in-one" and "all-in-one" places, and resolutely closing public gathering places with major safety hazards. (2) Construction safety improvement, special equipment safety improvement, geological disaster investigation, etc. (3) Strengthen publicity and education, improve safety quality, strengthen safety training for the principal responsible persons of enterprises, safety production management personnel and special operations personnel, and improve safety awareness and safety skills. (4) Strengthen emergency management and improve the monitoring system. All departments, units and enterprises should pay attention to the preparation and revision of the plan, ensure the practicability and operability of the plan, and strengthen the construction of emergency teams.

4. Strengthen the reporting system for responsibility implementation.

From the beginning of this quarter, villages and relevant regulatory responsibility units shall, before 25th of the last month of this quarter, submit a written report to the Zhen 'an Office on the performance of safety production supervision responsibilities in this quarter and the safety production work within the scope of responsibilities, and regard it as one of the important contents of the year-end assessment of relevant responsible persons.

Participant: xxxx

Minutes of safety production meeting 8 Meeting time: xx year, X month, X day.

Meeting place:

Participants:

Meeting minutes:

Meeting contents:

1. In view of the unclear management of lunch break at the group headquarters, some employees were late in the afternoon, and their work was relatively loose. The meeting put forward suggestions for making unified regulations on lunch break, such as 15 minutes earlier to avoid the peak period and 15 minutes later to arrive at the post at most.

2. The meeting asked everyone to sum up the most impressive points after reading The Road to the Future of Wei Zhi Enterprises: ① People-oriented, employees, company needs, instinct and essential needs.

② Best self, love yourself, accept yourself (good and bad aspects) ③ Pursuing the best product value and customer service value.

④ Create a community, including music, fences, animals and plants, environment, etc.

⑤ Employee care

6. Love and responsibility

⑦ Gratitude and harvest

Live in harmony with everything.

The meeting asked why everyone didn't try their best, and the participants' answers were as follows:

① Inertia

② Lack of self-confidence and professional ability.

(3) I don't know my goals and what I want.

(4) can't accept all of yourself, can't really express yourself.

⑤ Personal views affect harmonious coexistence with the outside world.

⑥ Insist.

4. Before the end of the year, the Group requires everyone to submit 10 cases of "how to be the best self", and departments submit 10 cases of practicing corporate culture in Wei Zhi. At this meeting, it was decided that before the end of August, each employee of the Human Resources Department of the headquarters should submit at least five cases of "How to be the Best Self" in writing, and before the end of September, each employee should submit two cases of practicing corporate culture in Wei Zhi to the department. Regarding the writing of personal cases, the meeting suggested the following format:

① Status: _ _ _ _ _ _

② Execution: _ _ _ _ _ _

③ Results: _ _ _ _ _ _

In view of the writing of departmental cases, the meeting gave some examples to illustrate:

① Company X produces long-term workers. Because sitting for a long time is not good for health, General Manager Xiang designed a kind of breathable and heat-dissipating cushion for workers to use.

② The activity of "You wear it, I wash it, I iron it" proposed by the clothing company.

③ Distribute all kinds of books to employees.

Note: The cases cited by employees should be timely, preferably in the last year.

Meeting harvest:

Through this inaugural meeting of * * *, all the colleagues in the Human Resources Department have a deeper understanding of the corporate culture of Wei Zhi, a more accurate understanding of how to be the best self, and a profound reflection on why they have not been the best self. In addition, the meeting also clarified the case 10 of "how to be the best person" that individuals and departments need to hand in this year, and stipulated that each participant should hand in at least 5 cases before the end of August and at least 2 cases by the end of September. Combined with the actual situation of the department, it put forward specific suggestions and examples for case writing, which pointed out the direction for everyone's follow-up work.

;