Kunming SMS watch

1. The watch can receive 999 messages, with 60 channels, and a single screen can display 50 Chinese characters or 100 characters. The charging time is about 1 hour to 2 hours.

2. Press a key to lock the pager immediately. If the pager is not unlocked after 10 minutes, the pager will automatically delete the stored information. Press and hold the function key and the down key for more than 2 seconds at the same time, and the display screen flashes to release the one-key locking state.

3. The number (00 1/002/00) displayed at the top of the receiving information interface represents the currently displayed 00 1 message, the * * * received 002 message and the currently working 00 receiving channel.

4. Press and hold the function key for more than 2 seconds in the information receiving interface to delete the current information.

5. Turn the watch outward to display the interface of Figure 1 under the information receiving interface, and turn the watch inward for about 2 seconds to display the interface of Figure 4.

6. Open the startup software, click "All Pagers" on the main interface of the startup software, right-click to group users and register watch pagers.

7. Right-click the registered pager and select "Properties" to pop up the pager property map, and set the frequency used by the pager in the receiving channel.

8. Open the watch menu, select "Open Learning" and "Open Pager" to enter the information receiving interface, open the main interface of sending software, select the same channel as the watch channel in the channel selection at the lower left, and then click "Learn" to complete the learning connection between the host computer and the watch pager. After successful learning, all information in the pager will be cleared, and the number of channels will show the channel number of the receiving channel in the pager properties.

9. Double-click the pager to be sent in the main interface of sending software to enter the sending information interface, enter the information and send it. Double-click the black arrow below the message number in the main interface of sending software, and drag it to the pager to send the message repeatedly. Duplicate messages will be automatically recognized without repeated reception, and can supplement previously unreceived messages.

10. In the main interface of startup software, right-click the black arrow below the message number to delete all the sent messages in the interface.