How to realize SMS alarm function with Kingview 6.53? Seeking a master requires a routine.

Shanghai Shengsheng Electronics has a short message alarm platform specially designed for configuration software. Specifically, it has the following functions

1. You can read the data of INTOUCH,WINCC,IFIX,MCGS, Kingview and other software through OPC,DDE and other communication methods.

2, you can read the data of driver software such as kepware and da server.

3, send isolation can be set for each alarm point, and whether it needs to be sent can be determined by setting the SendEnable attribute of each point.

4, alarm groups can be added or deleted.

5, mobile phone users can be added or deleted, and mobile phone users can freely join or leave the established alarm group. Users can be divided into three priorities, and different transmission delay times can be set according to the priorities when an alarm occurs.

6, alarm points can be added or deleted.

7. You can modify the content sent to the mobile phone user. By setting the AlarmComment value of the alarm point, each point can realize the content sent to the user when the alarm occurs.

8. You can set the delay time of alarm sending. When a point frequently jumps from normal state to alarm state, this function can prevent the alarm from being sent frequently. It is realized by setting the values of DelayLevel1Set (unit second, default 2 seconds), DelayLevel2Set (unit minute, default 6 points) and DelayLevel3Set (unit minute, default 12 points) of the corresponding points.

9, the alarm sending frequency can be set, that is, the countdown function. When a point is always in the alarm state, it can be realized that this alarm information will not be sent repeatedly for many minutes by setting the CountDownSet (unit minute, default 24 minutes) value of the corresponding point.

1. You can manually enter information and number to send short messages, or manually send messages by group. This function is often used for temporary event broadcasting.

11, alarm sending records can be queried by group or person or alarm point, and export to excel table is supported.

12, new project, opening project and saving project are supported.

13, support other mobile phones to send query codes to query the current values of some points. 14, support sending the current values of some points to a certain point or group at regular intervals.