Is there any other way to detect that the network cable is not working without a computer?

Is there any other way to detect that the network cable is not working without a computer? There is a network cable tester, which can test whether the network cable is unobstructed by plugging in both sides of the network cable and indicating by the signal lamp.

There is no network cable of telecom, Unicom and Netcom on the construction site. How can all the computers on the construction site be connected to the Internet? Do you have a 3G signal? If so, you can use the 3G network card to surf the Internet. Buying a 3G router allows other computers to enjoy 3G networks, but the cost of accessing the Internet is relatively high.

How to open the network cable without a computer? There is no computer and network cable at home, so I can open a WLAN package of the operator to access the Internet wirelessly. Mobile is CMCC, 10086, telecom is China, 10000, and Unicom is China Unicom, 10000. Let's take the opening of mobile CMCC as an example:

1, SMS service: write a short message "KTWLAN" and send it to 10086. Choose WiFi package according to the situation.

Note: After SMS mode is enabled, the 10086 system will issue the Internet password to the mobile phone. The above pinyin letters can be large or small, and short messages are sent to 10086 for free. You can also bring your ID card directly to the mobile business hall.

2. Enter the "Settings" menu of the mobile phone and turn on the WLAN (or wireless WIFI) switch. In WLAN(wifi list), select ChinaNet network; Click the link. Go back to the main interface of the mobile phone, open the browser and visit any Internet address. On the WLAN authentication page that pops up (automatically pops up), enter the WLAN account number (mobile phone number) and password, and click Login. The authentication success page is displayed and cannot be closed. When you don't need to surf the Internet, you need to click the logout button to log out.

3, you can also connect directly without opening your mobile phone, and then enter your mobile phone number in the pop-up webpage. Then the system will automatically send a verification code, enter the verification code, and you can surf the Internet. Remember to log off when not in use. Please consult the operator's customer service for specific charges.

Isn't there a network cable installed on the computer network? There is no rule that you are not allowed to install network cables without a computer! If there is such a rule, then the network cables in various houses under construction should be removed? This is just a phrase from your local Netcom company. They may want you to install the computer quickly and pay the internet fee!

How to press the network cable without a fixed telephone? Both China Telecom and China Unicom can install network cables directly without installing telephones. But it depends on whether your position is within the scope of support.

Besides antivirus software, how does a computer detect viruses? If nothing else, if you install 360 security guards, he will give you a hint every time something goes wrong.

How to install a network cable without a computer? Hello, you can install broadband without a computer. After successful broadband processing, you can purchase wireless routers and set up wireless networks.

Buy a router. It costs more than 50 yuan. You can use the wireless network. ..

Without a computer, it does not affect the network cable at all. Why do you ask so strangely?

Computer settings and router network connection methods:

Home network environment wiring:

1, a modem: a modem)-router wan port; Router LAN port-computer.

2. No modem: network cable-router wan port; Router LAN port-computer.

The router can be set up with a smart phone, and the steps are the same as those of the computer:

1. Enter192.168.1.1in the browser (it may be something else, marked on the nameplate of the router);

2. Enter the account number and password. (The account number and password are marked on the nameplate of the router);

3. Click "Setup Wizard" in the left navigation bar, and then click "Next";

4. Select "PPPoE" mode and click Next;

5. Enter the broadband account and password (the account and password given by the operator when handling the network), and click Next;

6. Set the wireless name in the SSID; At the PSK password, enter the wireless password to be set;

7. Click Finish to set successfully, save and restart.