Kitchen cabinet knowledge

The edge of the kanban. The edge sealing of high-quality cabinets is delicate, smooth and feels good. The sealing line is straight and the seam is fine. Professional manufacturers use linear edge banding machine to complete edge banding, decapitation, trimming, chamfering, polishing and other processes at one time to ensure the most accurate size. Workshop-style small factory, with a brush glue, hand-pressed edge sealing, with wallpaper knife trimming, with manual polishing machine polishing. Due to uneven pressure, many places are unstable, and harmful substances such as formaldehyde will also volatilize into the air.

Second, look at punching. Nowadays, panel furniture is assembled by three-in-one connectors, and the coordination and accuracy of hole positions will affect the structural stability of cabinets.

Third, look at the chopping block. Cutting board is the first process of cabinet production. Large-scale specialized enterprises use electronic sawing machine, and input the machining size through computer, and the computer controls the accuracy of material selection size, so that several plates can be machined at a time. The equipment performance is stable, the plate size accuracy is very high, and the tolerance unit is micron.

Look at the door panel. Door panels are the faces of cabinets, as important as people's faces. Door panels produced in small factories are prone to deformation due to improper treatment of substrate and surface technology.

Fifth, look at the assembly effect of the whole cabinet. Any size error in the production process will be displayed on the door panel. For cabinets produced by small factories, there will be uneven cracks and uneven gaps in the door panels.

Look at the slide rail of the drawer. Although it is a small detail, it is an important part that affects the quality of cabinets. Because of the hole position and size error, there is an error in the fitting of slide rail installation size, which leads to the drawer not being pulled smoothly or loose left and right. Pay attention to whether the gap in the drawer is even.

In recent years, high-tech materials and high-tech have been applied to the whole kitchen one after another, which has greatly improved the function and overall performance of the whole kitchen and started to pay more and more attention to details. In this regard, Shanghai Oubang cabinet experts remind the public that the following details can not be ignored when purchasing as a whole.

The first is the design of the kitchen corner. A practical integrated kitchen should not only rationally allocate large pieces, but also make full use of dead space in a limited space. A kitchen corner refers to a corner in the kitchen. In the past, traditional cabinets often left these corners vacant, but if they are fully utilized through humanized design, they can also achieve the effect of making full use of resources. Some modern integrated kitchens allow the corners to be loaded with items through connecting racks or built-in pull rings. If the kitchen space at home is not large, the details in the corner can not be ignored.

The second is the performance of hardware accessories. Hardware fittings connecting all parts of the whole kitchen directly affect the quality and service life of cabinets. Therefore, when ordering the whole kitchen, we should pay attention to the performance of hardware accessories. Especially the whole kitchen of foreign brands, the accessories used are mostly imported or customized according to foreign standards, so citizens should consider the convenience of replacement. When ordering the whole kitchen, it is best to buy more supporting hardware accessories, so that it can be replaced if it is damaged.

Environmental protection must be considered.

Kitchen is closely related to people's life and health. Therefore, the environmental protection and health of the whole cabinet are very important. Some experts pointed out that at present, there are no strict environmental quality standards for furniture in China, only the testing standards for wood-based panels (particleboard and density board). Therefore, Oubang cabinet experts remind the public that when choosing the whole cabinet, it is best to smell whether there is a strong irritating gas. In order to save materials, many manufacturers only do partial edge sealing treatment, and it depends on whether all edges are sealed when buying; Try to reduce the on-site edge sealing, because it is difficult to seal the edge in the on-site operation, and the factory adopts high temperature and high pressure edge sealing, which is firm and tidy after edge sealing; It is best not to install a backboard behind the cabinet, which is economical and environmentally friendly and easy to clean. Even if you want to use it, you should use double panels, and the single panel is seriously polluted. Some more formal cabinets are made of white Hilaire board, which contains green moisture-proof agent. All the holes in the cabinet are covered with caps to prevent moisture from entering and reduce formaldehyde release.

Style and overall adaptation

With the introduction of various personalized kitchens, the overall kitchen style of Shenzhen cabinet market is becoming more and more diversified. So, how should the public choose?

In this regard, Oubang solid wood cabinet experts said that when citizens choose the whole kitchen, they should consider that the kitchen is an important part of the whole family design, and its design style should be consistent with the family design style, especially with the connecting parts such as dining room and living room. Specifically, in terms of color, material, modeling and so on. It should be integrated with the dining room and living room, echoing each other. For example, in terms of color, if the whole family design is mainly warm, then the color of the whole kitchen should also be warm; In terms of modeling, if the overall style is relaxed and lively, the style of the kitchen can be relatively flexible, and the lines and surfaces can be changed more.

Identification of cabinets

1, see promotional materials:

Formal company publicity materials, in the form of bound volumes, are a groundbreaking record. There is a standard logo and registered trademark R, which generally includes the workshop introduction, production equipment, production capacity, design capacity, sample display, material and its performance introduction and service commitment of the whole company. The most important thing is to let the company's cabinets open according to the prices of all grades, so as to truly "make public quotations and understand consumption".

2, look at the appearance texture:

The door panel must be free from ups and downs, and the gap of the door must be uniform and the gap size should be consistent. The door panel can be opened freely. There is no noise inside or outside the drawer. Desktop without color difference and flat-fell seam.

3, see if there is a burst edge:

See if the door panel has burst edges. Open the cabinet door and check whether there are adjustment holes on the laminate. The adjustment holes in the laminate are usually uniform, and there is no explosion around the holes. Regular manufacturers have professional grooving machines, and both sides of the groove are smooth and tidy, and there is no edge explosion.

4. Look at the trimming part of the side:

Whether the color of the trimmed part of the side is the same as that of the front, and whether there are traces of oil rubbing on the edge sealing part, because the edge of the inferior edge sealing strip will close the pores if there is oil rubbing.

5. Look at the hanging code of the hanging cabinet:

Generally, it is necessary to ask whether the hanging code of the hanging cabinet can be adjusted. Regular manufacturers use the hanging code installation method. After the cabinet is installed, the height and left and right can be adjusted appropriately. When the cabinet is disassembled, the screws will be fastened, and the cabinet body is quite tidy.

To know the happiness index of a family, look at their kitchen first, and then look at their bedroom. Therefore, modern urban women will humorously send short messages to their husbands who are busy working overtime, saying: I am in the pot and the food is on the bed. The kitchen is the core of the house. Although it occupies a small area in the house, it is a room with concentrated housework and various functions, and it is the main service space of the house. Modern families can't live without modern kitchens. As a result, the whole kitchen, as a fashionable home, has gradually entered consumers' homes, becoming a trend and direction.