Where does the user have the right to send information?

1. Press the "Menu" key on the remote control to enter the "Main Menu" interface and select "System Settings";

2. Enter the password "9999";

3. Select "Installation and Signal Detection" (default selection) in the "System Settings" interface, and press the "Confirm" key of the remote controller twice. Stand behind the satellite antenna and let the front of the satellite antenna rotate slowly from due south to the satellite direction (it is recommended to rotate at a speed slower than the second hand of the watch). During the rotation, always pay attention to the changes of "signal strength" and "signal quality" in the debugging interface of satellite receiver on TV, and stop when the indicating signal turns green, indicating that the satellite has been initially identified and locked;

4. Network connection settings. IP setting:114.251.156.067, port setting: 4567 or 04567;

5. The area code is set to the first six digits of the local ID number;

6. Turn off the power of the set-top box, insert the mobile phone card and smart card, and then turn it on;

7. Select "Base Station Information" in the system settings and press OK;

8. Wait for the satellite machine to automatically search the mobile base station information, and the base station information will be automatically listed according to the signal strength of the base station;

9. Wait for the base station information to pop up, and the scanned base station information will appear on the TV, and click the orange button "Save and Confirm";

10. In the channel screen, the dialog box "Smart card is not opened. Do you want to install it? Select OK to install. Select "Return to Play Free Program", and then press "OK" to open and install it.

1 1. A message box will automatically pop up later, prompting "Sending succeeded". After exiting the menu, you will be prompted in the upper right corner of the screen, "Please wait during the installation?" After 2-3 minutes, the screen will automatically pop up "Installation successful". If this message pops up, please wait patiently for about 10 minutes;

12, the program will be played automatically later, and you can watch TV normally after authorization is completed.