After restoring data on iPhone 6 Plus, the screen goes blank. How to restore it?

Solutions to the white screen on the iPhone 6 Plus:

1. You can try pressing the Home + Power buttons on the home screen at the same time and force restarting the iPhone to see if the problem can be solved. .

2. If it is because some special operations were performed before the white screen appeared, the system may not be able to start up. Under normal circumstances, unexpected situations during the iPhone update process, or system damage caused by jailbreaking, etc. will lead to a white Apple screen. If you encounter such a problem, you must use a computer to fix the problem.

3. For general Windows systems, you need to install the latest iTunes software on your computer. You can download and install it from Apple's official website.

4. After preparing the iTunes software on the computer, connect the iPhone with a white screen to the computer and open the iTunes software.

5. Then the iTunes software will automatically identify the iPhone currently connected to the computer. If a prompt appears that an iPhone in recovery mode is detected, please click OK to continue.

6. If there is no prompt to detect an iPhone in recovery mode, you can put the iPhone into recovery mode according to the following steps:

The first step is to simultaneously Press the Home + Power buttons on the main screen and let go immediately when the screen goes black;

The second step is to press the power button to turn on the computer. When the Apple logo appears on the screen, do not release the power button;

< p>The third step, then press and hold the Home button on the home screen without letting go until the screen goes black;

The fourth step, when you see the screen goes black, please release the power button and continue to hold the Home button. key until the interface in the figure below appears in iTunes on the computer.

The fifth step is to start restoring the iPhone system, also called flashing. Of course, this operation will delete all data on the iPhone, so please operate with caution. If you confirm that you want to continue, click the Restore iPhone button.

Step 6: You will be prompted that once restored, all previous data on the phone will be lost. If you confirm, please click the restore and update button.

Step 7: Follow the prompts step by step. iTunes will automatically download the latest iOS firmware. When the download is completed, it will automatically restore the iPhone system. Since iTunes downloads a complete iOS firmware, the capacity is relatively large and the download will take some time, so please be patient.