How to connect the computer after it is disconnected?

Question 1: How to disconnect the computer correctly and how to connect it correctly after disconnecting it correctly? Disconnect:

1. Right-click the network connection icon in the taskbar at the lower right corner of the desktop and select Open Network Connection.

2. In the pop-up window, select the icon you are connecting, right-click and select Disable.

Connection:

1. If there is a shortcut on the desktop, connect directly through the shortcut.

2. If there is no shortcut, just click "Start", select "Settings", select "Network Connection", and then select the networking method you use.

Question 2: How to reconnect the computer after it is disconnected 1? Right-click IE-properties.

2. Click the connection and select the setting to the right of the broadband connection (default).

3. Open Settings-Select Properties-Click the option "Before disconnecting and redialing" and select "Never" as "Idle Time".

Question 3: How to make the computer automatically connect after the network is disconnected? Try this.

1。 Right-click the Wireless Network Connection property on the wireless network.

Check "Configure my wireless network settings with WIN"

2。 Find your wireless router in your preferred network. If not, please add one manually. Generally, you can log in to the wireless network here. Is there too many wireless networks? Delete some unused ones and transfer your classics to the first one.

Right-click the Wireless Network Connection-Advanced property on the wireless network.

Select any available network (preferred access point)

Some networks refresh slowly, and you will feel the link is slow. For example, it is normal that the computer is turned on early and the router is just turned on, and the link is slow. He has a process of refreshing the wireless network.

Question 4: How to connect to the disconnected network after the computer is disconnected;

1. Right-click the network connection icon in the taskbar at the lower right corner of the desktop and select Open Network Connection.

2. In the pop-up window, select the icon you are connecting, right-click and select Disable.

Connection:

1. If there is a shortcut on the desktop, connect directly.

2. If there is no shortcut, just click "Start", select "Settings", select "Network Connection", and then select the networking method you use.

Question 5: How to connect the computer when it is disconnected? Try this 1. Right-click the wireless network connection property on the wireless network, and then check "Configure my wireless network settings with WIN" 2. Find your wireless router in your preferred network. If not, please add one manually. Generally, you can log in to the wireless network here. Is there too many wireless networks? Delete some unused things and switch the computer to the first one. Right-click Properties Wireless Network Connection-Advanced and select any available network (preferred access point). Some networks refresh slowly, so you will feel the link is slow. For example, it is normal that the computer is turned on early and the router is just turned on, and the link is slow.

Question 6: Is there a router that can be disconnected and reconnected on the computer? If so, how to operate? Do not set up automatic dialing for routing. Dial yourself with a broadband connection. That's it.

Question 7: How does the computer set "Do not automatically disconnect from the network"? Are you a WIN7 system? If so, you right-click Broadband Connection-Properties to open the Properties dialog box, select the idle time before hanging up, select Never, and then click OK.

Another way is to open IE Click Tool-Internet Connection, open the Connection tab, and select the broadband dial-up connection below. Independent settings can be found in the pop-up broadband connection dialog box. Then, when the connection is no longer needed, remove the hook before disconnection, and play with your hands is basically ok! ! Take it.

Question 8: Why does the computer always disconnect automatically? 1. Eliminate the contact between the network cable or the crystal head and the connection.

2. It is possible that the broadband cat is disconnected because of the voltage problem. Find a multimeter to test the voltage to see if it is normal;

3. Eliminate the above two reasons, which may be caused by the mismatch between the speed configuration of your computer network card and the Ethernet port of the connected device. You can try to modify it as follows: right-click network neighbor-properties-right-click local connection-properties-general-configuration-advanced-connection speed and duplex mode, and the original "adaptive" can be changed to "10M full duplex".

Q:

The voltage can't be suddenly abnormal. It has been used at home for several years. Is there anything wrong with cats?

Answer:

The possibility of general hardware failure is not too great. You can try according to the third rule first.

Question 9: Why did my computer disconnect from the Internet and then reconnect? Unable to access the Internet:

I hope it will help you:

First of all, the computer itself, network card problems, drive shutdown, or network cable problems, routers and other reasons can not access the Internet, one by one to rule out.

Second, there is a virus in the computer, IE has been maliciously modified, and IE has made an error. Can be disinfected and repaired with Huangshan IE.

No copying or reposting, Gobi desert eagle.

Third, the data packet is lost, which may be a problem with the crystal head. Redo the crystal head.

Fourth, the route does not turn on DHCP, so IP cannot be obtained, the network is limited, or someone in the same network uses executive to cause interference.

Fifth, the network speed is slow, which may be poisoning, or someone on the same network seriously occupies resources, such as BT, downloading.

6. QQ and other instant messaging software can log in, or open the webpage. Perhaps DNS is not set, please set it according to the local public DNS address.

7. Unable to access the Internet due to system damage, please reinstall or restore the system.

Eight, even after surfing the internet, I just can't open the webpage. There may be something wrong with the network signal. Please contact the local broadband access department for inspection.

Router, if the cat is overheated, please turn off the power for fifteen minutes and try again.

Question10: how to reconnect the computer of win 7 system after it is disconnected? Click on the computer or signal sign in the lower right corner, and you can connect at that point.