How to transfer all the short messages (including MMS) from the mobile phone to the computer?

Before brushing your teeth and when you fail to brush your teeth, you must watch it. I hope it helps.

I can see help posts every day, and many of them are similar in content. Almost all can't be brushed for a few minutes or die. These reasons are not technical problems! But you're not ready! !

Preparation before brushing the machine

1. Read more posts, especially the essence posts! Know everything before you brush! Don't brush before asking for help! ! !

2. The driver must be installed! Don't rush to load the driver before brushing, first try whether the phone can connect all the software, such as pc suite, Phoenix, nss ... and some commonly used software!

3. The battery must be fully charged! Lack of electricity is also the reason why many people fail.

4. Clean the USB interface of the mobile phone before brushing! It is best to brush with a soft toothbrush! Better add some alcohol if possible! You'd better brush the data cable, too

5. Check the contact problem of NO. Plug in the data cable interface before the data cable!

6. It is best to use the USB interface at the back of the chassis when brushing the machine! Because the interface data behind is relatively stable!

7. Don't touch the data cable and mobile phone during the brushing process! ! ! Wait patiently for it to end! ! !

2. Main contents

1 What is a brush machine?

More directly, it is to update the system for mobile phones.

2 Software version

Phoenix offline brush is recommended.

3 pay attention to the version

You can only brush from a lower version to an advanced version or from the same version to the other party.

4 Commitment to the required motivation

Install pc suite

5 Brush software

Commonly used software is Phoenix, jaf or nsu.

6 The reason why the mobile phone can't be connected

Most of them are driving problems. Check the u port of the drive line.

Several common problems of 7 brush machine

1, there is no Chinese after brushing, how to solve it? !

Answer: If your machine has not changed the CODE CODE before refreshing, the system may not have Chinese after refreshing, but first of all, it must be clear that when you use NSU to upgrade the new firmware online, NSU will automatically search for the new firmware version corresponding to the existing version of your mobile phone (the code code has not changed) to upgrade, that is to say, you must first make sure that the regional version of your mobile phone is not "European version", otherwise there will be no Chinese system after you refresh the machine directly. Well, let's get to the point, because the default language after swiping the phone card is English, and it only takes a few simple steps. Enter the menu, that is, the main menu, and then follow the following steps to operate the tool-Settings-General-Personalization-Language-Simplified Chinese, then restart the phone, and then restore Chinese.

2. Do I need to replace the invalid SIM card before brushing?

A: Many netizens hold different opinions on this issue, some say it is necessary, and some say it is not necessary. Friends who think they need it can understand that they are afraid of making phone calls or sending text messages in the process of brushing, and they are afraid of becoming "bricks", but if you understand the principle, you will understand that there is no need at all. Why not? Now explain the reason, online brushing is carried out in two steps. The first part is the download of new firmware. At this time, the mobile phone can still be used, including answering the phone and sending and receiving text messages. The download of the new firmware will not update the mobile phone system, so using the mobile phone at this time has no effect. The second part is the stage of updating the original mobile phone system with new firmware. At this time, even if someone calls you or sends you a text message, it is impossible to get through. To sum up, you don't need to change the SIM card before swiping the phone.

3. What does the code mean?

A: CODE code is Nokia's mobile phone identification code, which is located on the small label below the battery box of the mobile phone. Code codes of different Nokia models and versions (European version, Asia-Pacific version, Hong Kong Bank, Bank of China, etc. ), NSS software is software that changes code.

Note: The above settings are made when your machine version is Asia Pacific or Hong Kong Bank. If you are a European version machine, you have to change the code and redraw it yourself!

4. I want to surf the Internet and brush my computer. What software do I need to download and install?

Answer: Nokia PC suite (USB driver installed), NSS (code changing software) and NSU (online upgrade program software) need to be downloaded and installed before brushing the machine. These three softwares can be downloaded in the "brush area" of this forum. Please use the forum search function for details.

5. After brushing/baking, you will be prompted "Installing" every time you start the machine. How to solve it?

Answer: Method 1: Go to program management to see if there are any programs marked "Not Installed". If so, just install all programs marked "Not Installed".

Method 2: If method 1 cannot be installed, remember the names of these programs. Connect the PC with the data cable of the mobile phone, then select the data transmission mode on the mobile phone (the normal version can also use the card reader), enter the computer to select the mobile storage, use the computer search function to type the program name you just remembered in the search bar, then search, and directly select Delete after searching. There will be no "installing" prompt when you start the machine again in the future;

Method 3: Check where your theme file is installed. If it is mass storage (memory card), delete the theme file and install it on the mobile phone for storage, there will be no such prompt.

Note: It is normal to display "Installing" at the first boot after brushing/baking!

6. Why do I always prompt that I can't find my mobile phone when I change the code with NSS and NSU?

A: This is a frequently asked question about brushing your mobile phone. In fact, this is caused by the driver. I will try to explain the solution simply. After preparing to brush the mobile phone, install the old version of 6.84 PC suite first, and then install NSS, so that it is easy to identify the mobile phone with NSS and change the code smoothly. Then turn off NSS. In fact, after modifying the code, NSS has completed his task. We generally don't need him anymore. We didn't install NSU until we changed the code. No matter which version you install, it will automatically detect and upgrade to the latest version after installation. The consequence of upgrading to the latest version is that the driver has been upgraded by the way, which is why the PC suite can no longer recognize your mobile phone. The solution is also simple: delete the latest driver. Reinstall the driver of version 6.84 PC suite. The way to remove it is to remove a Nokia cable driver from the Add and Remove program in the control panel, and then reinstall the driver, which may be a perfect solution.