How to turn off the anti-theft lock on Changan CS 35 car?

If Changan CS35 anti-theft is locked, you can only call a professional car unlocker to help you unlock the matching key. You need to use a car computer detector to rematch the car key and release the anti-theft.

General car anti-theft systems have an integrated chip with some switch doors inside. When a trigger voltage is applied, the switch door opens and outputs a positive voltage to the drive circuit, inferring the actuator and alarm circuit. . Radio remote control is an important component of the anti-theft system. It is a remote control device that uses radio signals to control various distant institutions.

After these signals are received by the remote receiving device, they can instruct or drive various other corresponding mechanical or electronic devices to complete various operations, such as closing the circuit, moving the handle, starting the motor, and then by These machines perform required operations. And with the continuous development and advancement of technology.

The anti-theft system has now launched the most powerful function and the most requested function by customers. By pressing the lock button on the remote control, the car anti-theft system will automatically enter the anti-theft alert state. If the car door is illegally opened, ignited, When there is vibration or the trunk is illegally opened, the anti-theft alarm system of the car alarm will automatically send an alarm text message or make a call to a preset number to ensure the safety of the car.

How to disable the car anti-theft system

1. When the door lock is disabled, an alarm will sound. If this happens to your car, use the key to open the dead or passenger door and wait a few minutes for the alarm to stop. Open the hood and look for the alarm. Consult your car's operating manual to find out where it is, then turn off the alarm.

2. It is usually under the steering wheel, but when you pull it out, you must understand clearly and don’t pull it out by mistake. Find the fuse box, and then remove the fuse belonging to the alarm before all the above methods take effect. , you can disconnect the battery. Or go to a repair shop and ask the mechanic to fix it for you. You can just plug in the fuse without damaging the wiring.