I don't know how to repair the broken faucet.

In our home life, the faucet is an indispensable equipment. Faucet is a tool we often use. Repeated use will inevitably damage it. Let's take a look at how to deal with the broken faucet.

What if the faucet is broken?

1. First, we can change a washer for the faucet. If the washer is still dripping after replacement, it proves that there is something wrong with the valve seat of the faucet, and then we can start the corresponding treatment. First, we need to insert the wrench into the valve seat and then pull it back. After removing the old valve seat, we can install a new valve seat.

2. If we use a push-type faucet, all we need to do is find some tools to push the faucet after it breaks down. These tools are screwdriver, lubricating oil and carp pliers. When it is ready, we can start repairing it. The first thing we should do is to turn off the water supply, and then remove the handle from the faucet with tools. Then remove the fixing screws and replace them with new washers. We reassembled the parts of the new faucet. It can be used normally after installation.

3. If there is a problem with the faucet sealing ring, we can solve it by the following methods. First of all, make sure whether the packing nut of the faucet is tightened, but be careful not to scratch the nut with a wrench when using it. Then you can take off the sealing ring of the faucet and replace it with a new one.

If there is something wrong with the O-ring of the faucet, then we can replace it directly. The specific operation steps are as follows: firstly, prepare adjustable wrench, water pipe joint tape and replaced O-shaped material. The first thing to prepare is to turn off the water supply, then turn it counterclockwise, and then you can remove the threaded connecting nut of the faucet.

The water leakage of faucet is generally due to the abrasion of its axial washer, so when there is water leakage, we only need to loosen the gland bolt with pliers and take it off. After it is removed, it can be used normally by replacing it with a new axial gasket.

In our daily life, the faucet is a common device. It brings convenience to our life, but because we often use it in our life, the faucet is easy to be damaged. After the damage, everyone can carry out maintenance according to the above methods.