I understand that Unicom sent a text message, but why didn't the other party receive it?

Please try sending it to another number to see if other numbers can receive your message. If other numbers can receive your message and one number can't, then the problem lies with the other party. You can suggest the other party to check whether the interception function of mobile assistant/incoming call/firewall is set to all short messages, if so, it will affect the reception of short messages. After the settings are correct, turn off the phone and try again. If you can't send short messages to all numbers, please check whether it is caused by the following reasons: 1. The SMS center number is set incorrectly, please re-enter the correct SMS center number; 2. No signal or low battery; 3. Because the system is busy during the holiday short message sending peak period, it is suggested that you try again later or avoid the sending peak period; 4. The sending format is incorrect. If you send a short message to PHS users, you need to add the area code before the number; 5. The short message sending time exceeds 24 hours; 6. The mobile phone shields the short message sending function; 7. Blacklisted by SMS; 8. Insufficient quantity balance; 9. SMS inbox and outbox are full. If the above reasons cannot be solved, you can contact the local manual customer service or go to the business hall to confirm whether the SMS function is enabled and hand it over to the staff.