How to set the SMS start of Eberh parking heater?

First of all, the car is equipped with mobile phone parking heating device, mobile phone intelligent car control system, one-button start and intelligent induction. Next, go to a professional modification shop to upgrade and debug. After confirming that the car key can be started normally, close the door, use the remote control handle, lock the car out, start it remotely, and debug it for the first time. Pay attention to lowering the window to avoid the inconvenience caused by unsuccessful debugging.

Introduction of working principle of parking heater

Pumping a small amount of fuel from the fuel tank into the combustion chamber of the parking heater, and then igniting by an igniter to obtain an open flame; The combustion chamber is connected with the coolant pipeline of the water tank, and the heated coolant circulates in the car; After flowing through the warm air radiator, the car is heated and the engine is preheated. The whole process does not need to start the vehicle or engine.

Generally speaking, heating for 20 minutes can warm up the car, the engine is fully warmed up, and the ice and snow in the window will melt. According to the size of the heater, the amount of fuel required for one heating varies from 0.2 liters to 0.3 liters.

There are many ways to start the parking heating system. First of all, the parking heater can be started regularly; Secondly, it can be started remotely hundreds of meters away through a dedicated remote controller; The most interesting way is to turn on the parking heater by mobile phone remote control, which means that it is very convenient to turn on the parking heater by sending a text message or making a phone call to the vehicle.